-
V1 and V3 etc compatibility
Hi Guys, I have what i think is a Tado V1 Smart Thermostat which I have never installed (combi boiler location wasn't suitable for it). I have worked out I need the extension box, but only see V3 units available! Quick question is are they compatible (v1 thermoset and v3 extension). Thanks in advance! :)
-
Worcester CDi compact RF panel
My boiler has a Comfort RF2 fitted from installation I am OK with the wiring side of TADO but I can't disconnect the Comfort RF panel as I don't know how to access the ribbon cable plug. I don't seem to be able to remove the Comfort RF, maybe the TADO can't be used with this type of boiler?
-
How to turn off heater without closing radiator valves
Now when al rooms have reached the desired temperature, both the heater is turned off and all radiator valves are closed instead of just turning off the heater. This has 2 drawbacks: Firstly the batteries of the smart radiator thermostats deplete faster as they have to close and open each time. Secondly some central…
-
Tado wireless control receiver installation questions
Hello, I could do with some advice as I am trying to place my old panel wires into the Tado receiver. I have a Danfoss panel FP7898 with the following wires connected as below. N is Blue wire L is Brown wire No 1 Blue wire is DHW off No 2 empty is HTG off No 3 Red is DHW on No 4 Yellow is HTG on So I am thinking that I…
-
sdsdsdss
sdsdzzzzsd
-
sdsdsdss
sdsdsd
-
sdsdsdss
sdsdsd
-
sdsdsdss
sdsdsd
-
xxxxx
sdxxxxxxxxxxxxxxxsdsd
-
App no longer updating heating but showing as connected
The app is currently showing 27.2 degrees c from the Temperature Sensor, and appears to show as working but it's currently ~18-20 degrees c here. I've spent the last two days charing the sensor (one of the first gen versions, that are not embedded in the Thermostat) in case it was an issue with the battery. Today I tried…
-
Can I put Tado valves on all of my radiators?
I have a brand new Viessmann Vitodens 050-W. I would like to put Tado valves on all of my radiators but the installer wasn't sure if it was advisable as he wasn't particularly familiar with Tado equipment, so he recommended I leave one rad with manual controls. Your opinions would be welcome.
-
New wired wall thermostat doesn’t turn off
Ok so I think I might be losing my marbles? Have replaced a wall thermostat which died with a new one. All I did was remove the old one from the system and slot the new on in place and sync it up. However it seems unable to send an off signal? I’ve tested a few times and tried swapping a different one into the same room…
-
Tado AC Control with Smart Radiator Thermostat and/or Wireless Temp Sensor
I have a room with Tado Radiator Thermostat and planning to install wireless temperature sensor also there. Soon we are also getting Mitsubishi AC unit for cooling purposes in the same room. How does the Tado AC Control work with the Wireless Temperature Sensor or the Smart Radiator Thermostat in one room? Can the Tado UC…
-
EBUS - Vaillant/Glow-worm boilers
Hello, Can anyone provide me with a definite answer on where TADO are with support for EBUS on Vaillant Group Boilers? Can TADO be connected via EBUS? Can TADO be used on systems via Vaillant Group Smart Wiring? Do TADO EBUS connections have an impact on Boiler Guarantees? Thank you. Tony
-
Intergas hre is always on
I have installed the ne tado and connected the wire to + & - . Also selected D01 The kettle is always ON even after setting it to OFF in the thermostat Can someone help me with this?
-
Hot Water Issue
Hello Community, I’ve recently had a new boiler with Tado fitted. The app and Wireless Temp Sensor are showing the hot water is on but there is no request for heat showing on the Wireless Receiver and no hot water. Central heating is working, but since having turned off the heating last night, it appears to have stopped…
-
Can I use the extension kit as a hot water controller? New house and confused.
Hi, apologies if this is a question that gets asked a lot but i have recently moved house and the setup is different. I have been using Tado in my last house for the last 6 years successfully but need a bit of clarification for what to do. My previous house was gas central heating with a danfoss programmer wired directly…
-
Tado customer service is permanently offline
The link in my app goes to a page that says customer service is offline. It's been like that for 4 weeks.
-
Why are thermostats reporting different set and scheduled temperatures?
Hi, I’ve noticed recently that our tado thermostats are set to two different temperatures. Example: our Hallway is scheduled to be 17.5 degrees, but the app is saying the temperature is set to 13.6. (This is not related to actual temperature, which is 15). This is true for most of the thermostats. I’ve never noticed it…
-
Worcester Bosch Greenstar 4000 Combi + Wireless EU Receiver + Opentherm Will It Work
I am in the process of replacing my boiler to a worcester bosch 4000 combi boiler & want to use opentherm. I already have a V2 tado wired into my old boiler & want to use the wireless receiver. From info I have researched/collected I believe if I use the wireless EU receiver version it will modulate the boiler. Is this…
-
What connects to what ?
Hi does anyone know how tado connects to each other tado device inside the house? Do they all connect to the Internet Bridge ? Do they connect to the extension kit ? Do they connect to the Wireless Thermostat? They are certainly not using any form of mesh. It would be ideal if we knew, so we could potentially troubleshoot.…
-
Boiler pump choking when Tado closes too many radiators
if only a single room needs heating, tado requests heat from the boiler. Then, it takes some time for the radiators to open. During this time, the boiler pump chokes. My boiler has a built-in bypass, so the systems doesn't go into error, but it makes a lot of noise and it can't be good for the pump to do this on a regular…
-
Dual zone, with water tank
Hi everyone. We have currently have a dual zone setup with wired thermostats upstairs and downstairs. The boiler is in the kitchen with a hot water tank/heater in the airing cupboard where the timing controller is. Ideally I would like to change it all out for a tado smart system with the smart TVRs on the radiators. Is…
-
Relay contact resistance
I’ve been using a. wireless Tado to switch an Ecodan ASHP off if the house temperature gets too hot. The switching circuit is a 12v 1mA supply which needs shorting to turn off the heat pump. This is done by the Tado relay. This has worked well for over a year but now the heat pump will not turn off. I suspect the relay…
-
Heatline Capriz 24c Setup
Bought a Tado Wired Smart Thermostat V3+ in the Black Friday sales and hooked up to my Heatline Capriz 24c yesterday. Initially I followed the instructions in the Tado manual connecting a cable between the eBUS connections in the Tado and boiler. Positive to positive, negative to negative. Tested the Tado and no luck,…
-
Multi Home Management for Tado and other Smart Tech - Long post and interaction encouraged.
For those struggling with multi home (and Tado’s blunt refusal to offer any support for this), I have some updates to my original post about Smart tech in multiple homes that includes Tado. This has been a problem for more than just Tado, but most of the serious players have spent a little time looking at ways to make this…
-
Received email: Radiator Thermostat needs new batteries - but the app says that it is good?
Today I received an e-mail: We wanted to let you know that the batteries in your Smart Radiator Thermostat VA35702XXXXX in the room S... are low. Your thermostat needs two fresh AA alkaline batteries (LR6) ....... But when I look in the App it shows that the battery is "Good" Which one should i believe? It is only a couple…
-
Radiator is not reacting to reduce temperature
Hi all, I have 4 tado radiators which I bought 2 years ago. This happened with 2 of them with 1 week distance. Both have new batteries and were working properly so far. While the temperature I had set in the all was 18 degrees, the real temperature was 30 and the radiator was not reacting to reduce it. Could someone help?…
-
Temperature tiles in app do not match real temperatures
Hi. A few of my tiles in the iOS app don’t match with the temperature which is displayed when clicking that tile. When I restart the app it is Oke? Is it a software bug?
-
Central Heating Not Working (but Hot Water Is)
Hopefully someone can help with this really frustrating problem. I’ve installed my Tado this weekend and the hot water works perfectly (firing up the boiler) but I can’t get the central heating to work. When I switch the central heating on from my phone (or from the Temp Sensor) it illuminates the white LED on the Wireless…