-
Do smart radiator valves override the thermostat?
I'm sure the question has been asked and answered, but I haven't encountered 100 % what I'm looking for. Also, in this (https://community.tado.com/en-gb/discussion/1257/how-to-override-smart-thermostat-with-radiator-valve) discussion, some tado person seems to apologise for something being impossible. That scares me. ;) So…
-
How to delete and reinstall an Internet bridge
I've just added a new wireless starter kit to my boiler system. The Internet bridge says "complete installation " and when I click on this it asks me my make of boiler etc and says "incompatible". I'm confused as when I switch the heating on with the tado it fires up and works so surely it is compatible? I'm very confused!
-
Geo location - last out of the door
1. How many mobiles can the system support with regards to geolocation? 2. If say 4 mobiles are at "home" but leave at different times, does the system look for the "last out the door" before it acts? 3. When it does act, does it turn off any schedule which is on or just turn down the heating? If it turns the heating down,…
-
Tado with Worcester Greenstar 37CDi
I currently control my Worcester Greenstar 37CDi combi boiler in the lobby with a Nest learning thermostat in the lounge (Nest heat link in the lobby). I have a total of 14 radiators in my house, 12 with TRVs and 2 without. I would like to replace all the valves for Tado Smart TRVs and do away with the Nest. Can I fit Tado…
-
multizone - 2 channel zone valve heating
My house is currently setup for 2 heating zones (upstairs/downstairs) with zone valves fitted in the pipework for each zone. I really want to be able to operate each radiator independently in each zone so looking at Tado and moving toward the Smart Radiator Thermostats. I have a Grant combi boiler which is wired into a…
-
Please help me!
Hello, can I only install smart radiator thermostats valves in all my rooms without bridge or main thermostat hub and control them all on the app ?
-
Remeha avanta E1 Error
Hi, I'm getting the E1 error on the Remaha Avanta boiler, which indicates that there is some air in the pipes or not enough flow in the pipes, I cleared the air from the radiators and rested the boiler and it worked fine, then again today same error message, I asked the service people for the boiler they said the Tadoo…
-
Can anyone help me with wiring please
Hi everyone, I have a dual zone ESI system that I'm trying to install Tado to replace. Lounge looks straightforward and as the app but upstairs one has been used as a piggy back for a ring external siren and as such I have 3 extra cables that obviously the app wasn't expecting and doesn't tell me what to do with and I also…
-
Heat specific device with any call for heat
Is there a way I can heat a specific radiator (with smart thermostat) when there is any call for heat on the system? I know I could just fit a lockshield both sides of the rad but I also want to be able to call for heat on this specific radiator at other times.
-
Swapping out honeywell Sc9420c programmer and wireless thermostat
I'm looking to replace my wired honeywell programmer and it's wireless thermostat Sc9420c…
-
Reccomendation for a small 2 room setup
Hello. So first of all, i have a central boiler system at my place, which controls all the radiators in the house. I have 2 rooms and one kitchen (only one floor) in my apartment. I want to control (only) the 2 rooms separately, with TRVs. I do not want any cables in the rooms, so the reciever/wired thermostat should be in…
-
Vaillant Ecotec Plus 418 non-combi using Tado V3 starter 'combi' control (for digital ebus)
Hello, I have a Vaillant Ecotec Plus 418, I have acquired a Vaillant VR65 wiring centre and I can get a Vaillant thermistor for the hot water although this is optional (cylinder stat can be used) but required if the temperature is to be controlled digitally. If I buy the Tado V3 starter kit which seems to be listed as for…
-
Brotje
Same one how use Tado with Brotje WHBS 22 D?? Work good? Now i have modulating thermost Netatmo over OpenTherm and thermostat doent support control hot water - i can heat hot water only manualy.
-
I have a tado smart thermostat and my radiators have smart thermostats.
I have a tado smart thermostat and all but one (the bathroom ) of my radiators have smart thermostats and sometimes the smart thermostat asks for heat when the radiators do not. Consequently the boiler is running to unnecessarily heat the bathroom towel rail. what should I do? I’m thinking the smart thermostat is not…
-
Baxi Luna Air (new models) integration for diagnostics
Hi, I purchased a complete Tado system (wired smart thermostat kit V3+ and 8 Smart Radiator Thermostat V3+). At the time of purchase I requested compatibility with my boiler (Baxi Luna Air 28, brand new) which was confirmed. The system globally works very well, it controls the boiler by modulating the delivery temperature…
-
TADO Thermostat Integration with Heating Setup: Guidance Required
Current setup details: 1. Bathroom Dual Control Switch: Indicator for “sink” and “bath” with light indication upon operation. Used for hot water cylinder with electricity. 2. Vortex Boilerhouse: • Electrical Supply: 230V 50Hz • Output Options: 15.0 kW to 26.0 kW • Pump Pressure: 10.0 • Fuel Type: Kerosene 3. Manual Timer…
-
Vaillant EcoTec Pro 24 - plugged in
Does anyone have Tado set up with the EcoTec Pro 24 WITHOUT having to plug the receiver into a mains socket? IE Have you been able to wire the receiver directly into the boilers electricity supply instead? Thanks in advance
-
New installation with Vaillant - questions and doubts
Hi! I've decided it's time to upgrade my old heating installation with some smart devices. Tado seems the obvious choice, but I would like to make mysefl sure about a few things, before I spend a lot of money on it. Current situation: I have a Vaillant ecotec plus VC PL 246/3-5 with calormatic VRC 430 installed right into…
-
Tado wired thermostat not working
I have installed a new Tado smart thermostat wired, however the thermostat does not trigger the boiler to go on. I have a Netfit Topline Compact 25 HRC CW4 boiler. I am not sure what control interface I have and what to select on the Config Menu ID. But I have tried multiple configs and stil does not work. Any suggestions?
-
Boiler does not switch on
Just installed my new Tado wireless plus receiver. (No other devices) select temperature on APP or wireless thermostat, LED for heat comes on, CHNO becomes live but boiler does not fire. It is a Baxi Combi which works for running hot water so boiler ok. Was working fine with wired thermostat this morning and wiring looks…
-
Coping with multiple zones
My newly built home has three zones downstairs for the underfloor heating. These have been easily set up with Tado wired thermostats and all’s well. Upstairs there are the bedroom radiators on one zone valve, one for the bathroom towel rails and a valve for the hot water. The bedroom thermostat (a Honeywell T3R) is…
-
Thick house walls Bridge not connecting
Hi I have 4 TRVs and my bridge is connected to the internet. The property has very thick stone walls and only 2 of the TRVs are able to connect to the bridge. Is there a solution for this? Thanks
-
Can Tado work without a Thermostat as Boiler Controller
I have a biomass boiler which heats water in a buffer tank, which is used to supply both the central heating ( a mix of radiators and underfloor heating) and to heat the domestic hot water tank. The boiler has its own control system, which turns the boiler on and off based on the temperature sensor attached to the buffer…
-
Controllers
Hi all does know why my wireless controller says connected but my bridge is constantly saying pairing ?
-
Alexa Country Skills for more countries
Many of use use Alexa to have content from home countries even when living abroad. I for example use my Indian account with Alexa. Unfortunately the Tado skill has not been enabled in Alexa India and therefore I can't integrate my Tado devices to work with Alexa which is a shame.
-
Please can someone help!!
Hi We had a new boiler installed in our house in the summer. We also had a new Tado system installed, with 8 TRVs, 1 smart thermostat (boiler room) and 1 temperature sensor (downstairs). I am really confused about it and the installers did not explain it properly. Historically, there were two zones in the house, downstairs…
-
Open Term vs Relay Connection to Boiler
Hello I am considering purchasing a Tado "Starter Kit – Wireless Smart Thermostat V3+" and lots of "Smart Radiator Thermostat V3+s". My boiler is a "Remeha Avanta 30s", S-Plan with an external Megaflow hot water tank. Before I purchase I have 3 questions I hope someone can answer: 1) Does the Wireless receiver in the…
-
Tado keeps turning on/off the boiler all the time
I have a temperature sensor with smart thermostat and 3 other smart thermostats in 3 different rooms. At night I leave 2 of them around 18 degrees and one at 20 degree. My bill last 10days been around £200, what I see is different tado thermostats and sensor turning the boiler on even for 0.1 degree difference in set…
-
Geo location and away/ holiday mode
I'm being told different things. I'm looking to purchase tado thermostat buy I'm keen to know the following Geo location Holiday mode If I turn geolocation on, I understand I can set up to be aware I'm x metres, x miles from my house but does it turn off the heating and / or water completely In the summer ( water only) and…
-
Faulty radiator valve - help required
Hi guys, My system has been operating fine for nearly a year, but now one of the SRV's keeps indicating battery replacement required, only hours after new batteries have been fitted. I thought maybe the mechanical valve was sticking and causing problems, so I swapped the SRV head with one from another room, but the fault…