-
Newbie
Hi all, just installed a v3 package with hot water controls, can anybody explain what the purpose of the wireless wall thermostat is, as I understand it the wireless radiator valves control an individual room’s temperature.
-
Multi trvs in a zone
Hi. Hope someone can advise on this! At the moment two of the zones in my home consist of one trv (zone 1) in the downstairs loo and two in the conservatory (zone 2). The trv in the loo keeps going offline because (I think) the wi-fi signal in there is weak. If I added the loo to the conservatory zone would that overcom…
-
Heating system tripping electrics
Had tdao system installed for years, Last year had to buy a new starter kit. Togiht heating system started tripping the electrics - so had to switch off. I have Bridge, Hot water controller, Wireless themostat, and 6 radiator valves. Might not be tado related, but where do i start in trying to work out what part of the…
-
Cam Kam Me You
How can I access 4 locations on one app?
-
Swapping from system boiler/cylinder to Combi
Hi, I currently have a system boiler setup with my tado controlling the heating and the hot water to the cylinder. An engineer is coming to wire in the tado to the new combi boiler. Do I need to notify tado of the change of configuration or will the system just recognise it? I’m guessing the new wiring wouldn’t allow any…
-
manual change on the knobs
Hi, I just got my Tado equipment installed, and I noticed if I do change the temperature manually from the knob itself, it doesn't update on the app, is that normal or there is something I'm missing here?
-
Honeywell ST9100c & CM707 Integration - Single Zone
Hi Community I've recently moved house and taken my tado kit with me. I'm after some support in getting setup. Here's what I have: Tado wireless receiver Wireless Room Stat 13x Radiator Internet Bridge My house has the following: System boiler ideal logic system s15 Honeywell st9100c HW programmer Honeywell cm707 room stat…
-
Wireless receiver supporting modulated heating + hot water control, for system boiler.
I have an 'Ideal Vogue max' System boiler that supports OpenTherm - their support technicians have confirmed it. It heats the hot water in the hot water tank, plus the central heating (7 radiators, all with TADO TRV's). I would like to use the modulation feature of my boiler for central heating. What do I need? Does such a…
-
Tado AC control
I’ve just purchased a tarp AC control to use with my LG aircon. I was having issues with the temp of the AC being different to the actual room temp and not turning the AC off when a temperature was reached. I was hoping the Tado would do this but seemingly this feature has been removed. Is there anyway around this. The…
-
Lower temperatures wanted for AC unit
I’m using the Tado with an AC unit for both heating and cooling. It seems the lowest temperature I can set is 18 deg C but I’m finding this too hot for overnight use. Is there a way to set this lower?
-
Smart AC (2x) and Homekit “not responding” issue.
I have an issue with my 2 (two) Smart ACs. They continuously go to the “not responding state” in Homekit. They are still reachable and usable in the Tado app itself at that moment though. What works for me consistently as a workaround, is blocking internet access of any ONE, or BOTH Tado Smart ACs in my wifi router. When I…
-
Ideal Vogue Combi C32 Gen2
I have an Ideal Vogue C32 Gen2 and I wondered if anyone could confirm compatibility with Tado? I am also interested in the ease of fitting Tado to this boiler?
-
Ideal Vogue C32 gen 2 thermostat removal
I have revieved these install instructions from tado. All the tado equipment is successfully installed. The old thermostat (shown above) is removed however I do not have any plug in top left corner! There is only one plug, so where do I connect the timer link plug to? Initially everything seemed OK but now my boiler won't…
-
Query before buying
Hello, I just want to check something before I purchase the wired thermostat, I currently have 2 wired thermostats by ESI, one upstairs and one downstairs, I have an Ideal combo boiler and was wondering do I just replace the wired thermostats or do I have to get anything extra to connect to the boiler? The exact make of my…
-
De Dietrich INIDENS Compatibility
Hi Team, can you please confirm Wired Smart Thermostat compatibility with De Dietrich INIDENS heating? I am not able to make it works. Thanks, Ondrej
-
Opinions on potential range issues
Hi all, I have been viewing all the discussions on range issues but this is my first post. I am due to move house next month and in preparation I bought the V3 wireless thermostat starter kit plus 7 TRVs in the Amazon Prime sale. I will not have opportunity to physically test the system until after the Amazon product…
-
V3+ firmware update stuck
Hi, I got wifi easily - device "blinks" with my cell and laptop. If i touch tada it shows temp and wrench -sign after that. Updating seems to be stuck - I'v been waiting bit over an our now.. What to do?
-
Trv
I have got 6 trvs 1 is linked to the room stat ,if i want a specific room rad on is doesnt call the room stat and only comes on wit that specific room liknked to it any way it will work wit any room called for heat
-
Firmware Update taking forever
Hey guys, Just got my Tado Smart AC Control, and the setup has been upgrading firmware for the last 2 hours, on a relatively fast internet connection. Has anybosy experienced this before, or any tips on what should I do? Thx :)
-
Mixing Tado Wired and Wireless stats
Hi, Trying to figure out if its possible to mix a wired thermostat with the wireless starter kit with hot water control? In the middle of heating upgrade where I have 2 heating zones (Z1 & Z2) and a dedicated hot water zone (Z3) Planning to get the wireless starter kit (with hot water) to control/manage the existing…
-
Boiler firing when tado off
Does anybody else have a problem where the room thermostat is at temperature, so not calling for heat, and the controller is showing as off but the boiler is firing? I've got a problem where the boiler fires at 12noon every day for a couple of hours, even though all the tado settings are set to off. The only way to stop…
-
Edit tiles iPhone?
Hi yall, New tado user here. I found a thread about editing tiles from 2020 but it seems it is only possible from a computer? Is there any plans on iOS?
-
Tado Showing Offline
Hi all, Since 4:23am on the 17th of December, our Tado devices have all been showing offline. On the app, it’s showing the Wireless Receiver having no connection. Has a software update recently gone out that could affect this? thanks Lewis
-
No Hot Water or Heating
Morning I installed the extension kit on to my Worcester Highflow 440 CDI yesterday, and was able to pair it up, and everything is showing as working in the app. However, if I turn hw or ch on, nothing happens away from the boiler. This morning, I’ve come downstairs to it, and the ‘pilot’ light on the control panel is on,…
-
Do i have right kit after moving home?
Hi, Had Tado in previous house, Extension kit with wireless thermostat and then lots of Tado Rad valves. It was connected to a gas boiler and unvented cylinder, controlled heating and hot water all good. Moved house and we have a boiler, an unvented cylinder and two heating zones (three if you include hot water), upstairs…
-
How should I set up two heating zones/circuits using OpenTherm
Hi all - long time reader, first time poster... I am having my boiler replaced and integrating an additional heating circuit (of a basement flat I am amalgamating my house with). The boiler will be OpenTherm compatible (e.g. a Viessmann Vitodens 100-W 32KW system boiler) and the two heating zones and one hot water…
-
How do Iset up a time block?
Ive been trying to set up new time blocks without ant success. For instance just now i tried to set up a time block for my A/C to come on at 10 pm and turn off at 6am. It seems i can set the on time to 10pm but when i try to set the off time to 6am it just defaults back to 10.15 pm. I’ve tried deleting all another time…
-
Indirect Unvented Hot Water Cylinder
Hi, Current Tado system comprises of several smart TRVs, an internet bridge and a wireless extension kit, which is attached to my Valiant Combi Boiler. Want to add an indirect, unvented hot water cylinder. My plumber tells me that the cylinder coil will be heated by my combi boiler as part of the heating system, which in…
-
Tado v3+ - OpenTherm - Vaillant ecoTEC exclusive hot water temperature control
In my Tado v3+ - OpenTherm - Vaillant ecoTEC exclusive VHR 25/36CF/1-7 setup - when Tado changes hot water temperature, the boiler still shows temperature installed manually on the boiler itself. It looks like temperature control from Tado does work - I see that it takes much longer until water becomes hot at night when…
-
How to turn on the heat in the house if the phone or internet is not workjng
Hi, I have a ski cabin that is use by other people that do not have the Tado App and some time the internet is not working in the mountain, so my question is how I can turn on the heat using only the wired thermostat or and valve thermostat?