-
My wired smart thermostat is not switching off the pump for underfloor heating in my conservatory.
I have several smart radiator thermostats and they are all working perfectly but even when wired stat is off the pump is running
-
How long is configuration download taking?
My Smart Thermostat is showing the symbol for configuration download now for several hours is this normal? Also my room temperature is set to 20 degrees is the app, yet the actual room temp is 19.4 and I can't change it on the thermostat as it is downloading..... I just installed the system 3 days ago. I tried to reset the…
-
User Manuals
Are there any comprehensive user manuals for the Tado system? some basic things like "how do I tell if a radiator valve is open or closed (or possibly partly open??) some troubleshooting things like " My app says everything is off - and the schedule says everything should be off - but the wireless receiver shows both…
-
I am replacing my Danfoss RX1 with a Tado system and have the following wiring set up.
The wiring does not seem to make any sense. The RX1 is the top unit. Any help would be appreciated.
-
Tado V3+ thermostat relay mode
I’ve just installed a wireless Tado V3+ system with the extension kit to control my combi boiler (relay only). The problem is, that it’s turning the heat on every 10-15 minutes for only 5 minutes, so it turns on even if the temperature only drops by 0,05 degrees. Not sure if this is the intended behaviour, the old…
-
Need Help - Heating off but radiators on
Hi all, I recently had the Tado smart system installed and I am in desperate need of some help. I have set up the smart trvs in the rooms upstairs and left the downstairs with the old trvs. I currently have 3 radiators without any trv so i guess these are classed as always open. The issue i am having is even when i set my…
-
zoned heating with hot water
hi all i am looking for advice on which system i need for my house. i currently have: a firebird oil boiler a 4 x zone programmer/time clock (number 1 on the programmer is for hot water. numbers 2/3/4 on the programmer are for heat to different areas/zones in the house) i currently have 3 x wired thermostats in total (on…
-
Replace Nest for Tado?
Morning, I'm wondering if people can give me opinions on Tado as a replacement to the Nest system? I've had a Nest 3rd Generation installed for about 5 years now and have generally been happy with it, my boiler is a Viessmann Vitodens 100 WB1B dating to around 2010, but it supports OpenTherm and that is how my Heat Link is…
-
Chart showing activity of boiler and/or all devices
Would it be possible to have a chart showing when the boiler is actually fired up possibly with a note of which device has called on the boiler to start. this would help to arrange for devices to be coordinated to reduce overall gas usage.
-
How to display individual thermostats in Apple Home
Hi all, I recently purchased several tado TRVs to allow control over individual rooms. Obviously I can control them from the tado app, but as an Apple Home user, I manage my smart home pretty much completely from the Apple app. However, the Apple Home app still only shows the main thermostat. How / Can I show the…
-
TRV for single room
One of the radiators in my home is wrongly linked to the hot water pipes and so is on all the time making the room too warm. I want to control this radiator with a Tado TRV in two ways 1 set the desired room temp and let the trv adjust the radiator as required 2 set a time schedule to allow the trv to block hot water from…
-
ATAG Q30cc with BrainQ thermostat
Can I replace the ATAG BrainQ thermostat with a Tado ? My boiler is an ATAG Q30cc type. Thank you
-
Wireless receiver power, wireless and error lights rapidly flashing
Hi - I had a recent problem where Tado, after having worked fine for just over a week, suddenly refused to turn just the central heating on unless I also turned the hot water on as well. I had changed absolutely nothing with either the boiler, the Tado installation/setup or the wireless thermostat. I registered a support…
-
Battery life
I have 6 radiator valves, but one valve has had the batteries changed 3 times in 6 months (none of the others have required changing) and the changes seem to be getting more frequent, I have tested the batteries after removal and they all have plenty of charge. Any suggestions?
-
How to set Wireless Receiver to combi boiler mode?
I have installed my wireless receiver and it’s working great for central heating, but it’s attached to a combi boiler so the hot water function is not needed/doesn’t exist. The hot water function appears in the Tado app and until I set it to permanently off the hot water relay was on. Following the consumer/amateur install…
-
How to add the thermostat to Smartthings
Hi, does anyone know how I can integrate my tado thermostat into smart things? Tado seems to be one of the best out there, so I would expect this would be possible.
-
Can you help me verify what items I need for my Tado installation?
L.S., I want to purchase a Tado set and I need help determining what I need. My installation: 1x Remeha boiler 2x radiator (1 per room, first floor) 1x floor heating system (2 circuits, but one room) My questions: What wireless thermostat do I need that can (through a secondary device) switch the zone-valve? What model…
-
Tado heating the room to 29+
I was under the impression Tado could turn off when it hits the required temperature but since moving house it's been all kinds of wonky. Today the TRV in the living room hit 29 (currently down to 25) and it should cut off at 20? Yesterday afternoon I came home and I could feel the radiators were on low but I was two hours…
-
Is it possible to add hot water feed back to tado?
Hi, I have a Air source heat pump plumbed in like a standard S plan system, the system has priority heating for water, Is it possible to add a feed back loop into tado so that once the tank hits the temp set by the tank stat the tado switches off the water heating cycle and continue with the central heating cycle? Reason I…
-
Why do I need to make a separate community account?
I just registered my Tado equipment - why do I need to create a separate account for community questions?
-
Thermostats and TRVs
I have a wireless smart thermostat in my hallway but have installed smart TRVs in a couple of the upstairs bedrooms so that they can be off during the day when empty. I’m intending to do the same in our 2 year olds room but have a query about how that would work with the main thermostat. His room can get quite cold. If his…
-
Looking for advice on setting up bypass radiators
I was wondering what an efficient way of setting up bypass radiators is? Firstly what is the difference in setting up a radiator to act as a bypass in these different ways? 1) No SRV fitted, just set to be open (TRV removed) 2) SRV (set to, say, 25 degrees) , but set to be 'independent' from zone controller 3) Standard TRV…
-
2 boiler complicated home
Hello. I have an old cottage with a new extension part. There are 2 modern Worcester boilers with wireless thermostats. One boiler does the old part of the house, one boiler does the new part. We have water underfloor heating in the kitchen area that has a TRV located in the boiler cupboard which seems a bit naff. I’ve…
-
Tado says heat is on when its not
I have recently seen that the Tado app says the heat is on and using gas, according to my schedule, but the heater is actually not turning on, or only 30 minutes later. My connections are all good, as are the batteries. Any ideas how to fix this?
-
Re : Créer un bridge additionnel
-
Tado heats randomly to max
My Tado heats random rooms at random times to the max temp (25segrees). Sometimes living room, sometimes bedroom, sometimes all rooms. The settings show it set as 16degrees…. Has anyone else had any problems like this?
-
Hot Water not working when heating is off
Hi , I've had a Tado installed with wireless extender and recently I have noticed that the hot water doesn't seem to be working unless the heating is also working. I wonder if the Tado wireless extender has been wired properly by the professional installer. Could you help me find out what wiring setup should be correct? I…
-
Wiring up the wireless receiver to a Vaillant Ecotec Plus 831
Hi All. Hoping for some help please. (see below in comments) Thank You
-
Tado Specilalist needed
Does anyone know of a tado specialist in the UK Gloucestershire area? I’m looking for someone who’s worked with the system and is able to come to my property and advise me on how to make the system work properly. Every plumber or heating engineer I speak to hasn’t worked with the system. I have an old oil boiler the house…
-
What is pass through radiator? Questions for best set-up
I've just moved to tado from a Netatmo smart thermostat. We have one zone of underfloor heating with a wired thermostat connected to our boiler. Then the radiators are on another zone, with a wireless thermostat in the front room, which often gets cold, and has a radiator without a thermostat on it. I've seen discussions…