-
Bridge not connecting - need some technical information if possible
My full fibre network operator rolled out an update to their network which has killed my bridge. The "cloud" LED is now constantly flashing. The router logs are sparse and do not give any clues and I'm hoping that someone here is able to tell me the ip address that the bridge connects to so I can pass that information to…
-
Wired and wireless thermostat use
I have a wired thermostat in the hallway which means the sitting room is dependant on the hall temperature. Is there a wireless thermostat I can get which would override the wired thermostat if required?
-
Worcester Greenstar Boiler always on
Hi Anyone with any experience or solution for the following: Woke this morning to the house melting hot as the gas boiler was firing away. The smart schedule was set to heat to 16oC overnight (app indicated that no call for heating had been made in that time) however House was sitting at 23oC and boiler appears to be…
-
Trvs calling for heat but Tado doesn't activate boiler until hot water comes on
Hi. In the app I can see some of my 6 trvs calling for heat but the boiler and pump are silent. However if Tado settings call for hot water ON then everything kicks in and both HW and CH heat up. It's like Tado is ignoring my trvs. All of them point to single controller
-
Boiler on but radiators aren't?
I've just set up my new tado wireless smart thermostat starter kit and 2 RTVs. They're working fine in that if they're below the required temperature they can trigger the boiler (logic combi) to turn on however the radiators remain cold? Prior to installation I had two thermostats in the house controlling different zones -…
-
Modulating boilers with S-plan DHW
Hi All, A quick one just to ask if it is possible to have Tado dictate two separate outflow temperatures depending on what is calling for heat. For example, can I have my S-plan system with multiple heating zones and a hot water cylinder set up such that if only the radiators are calling for heat then tado requests a low…
-
Keeps login off the app
Hi Tado fellow-users Anybody still haves trouble with app signing off (every day in my case), needs to re-claim my phone and going through the geo-fencing questions? We are 2 persons in the household using the same username and 2 diff. mailadress in 2 seperet phones. My wife has a iPhone and I have Huawei Honor 10.
-
What's the remaining Smart Valves remaining position when getting out of battery??
Hi, I'm a relatively new Tado user with a multizone system with multiple Smart radiator valves, and I'm tracking how long the batteries last for which I've seen some other posts; so far I'm seeing a batt lifespan of about 2-3 months which is slightly worrying. The idea with a multizone control is powerful but the achiles…
-
What is needed to connect Tado to my boiler
Hi there I have tado smart radiator valves throughout the house and the bridge connected to the router. Im now wanting to replace my valiant vsmart system on my valiant ecotec plus boiler so tado can control the boiler when specific radiators in the house need heat. Which of the add on’s would I need to do this and why?
-
Frustrated with my Tado setup, numerous issues
Hey guys, I came here looking for advice for a few annoyances I've started having with my Tado system and fallen into a rabbit hole because it seems that these are fairly widely reported and nobody seems to get anywhere with Tado themselves. I don't mind finding technical issues with products as long as the company behind…
-
Using Tado with Daikin air source heat pump.
I have replaced an old oil-fired boiler with a Daikin air source heat pump. However, the heat pump is objecting to the short on-off cycles that low and medium heat demands are calling for. High heat is fine. I’m told that the minimum on time and repeat time can be set by Tado, but I’m not sure what values to request. I…
-
Is it safe for the boiler if I have a smart radiator valves fitted to all my radiators?
I am thinking of installing smart radiator valves to all my radiators but my plumber says that is a bad idea and risks overtemping the boiler. Because if they all close off, the boiler could get damaged. It appears I do have an auto bypass valve fitted to the boiler system, so I can’t see the problem. He says you should…
-
Geofencing multiple users
can i geofence multiple users and control devices allocate to them?
-
Timezone out. someone must be able to answer this
I've installed my wireless with internet bridge and 8 x TRV's. Setup the schedule and found that everything is 1 hour our. EG set room 1 to come on at 4pm uk time, comes on at 3pm. Looked at the Stats graph which show the current time and its 1 hour ahead. I've been onto to support but they are not coming back with a…
-
Wireless Temperature Sensor
Hi there. Does the wireless Temperature Sensor measure humidity as well?
-
Why does heating not turn off when the temperature on the thermostat is above desired temperature?
On my schedule the wired thermostat is set to 18 degrees. I select a boost for say 10 minutes up to 25 degrees. After the 10 minutes the temperature raises to 19.1 degrees but the heating does not turn off. I must manually turn off the heating. Why does the thermostat not turn off when the temperature is above 18 degrees…
-
Tado heating impact is minimal
Tado heating always heats up the radiators at a very minimal level rather my central heating will heat them up very fast. For example when the room is at 20 degr es celcius and I want to warm it up to 24. Tado will turn 20% of the radiator on and will only reach 22 after 1-2 hours. Then it will shut down. If I would use my…
-
loosing the will to live with tado
hey all, i have a simple todo kit for my heating- 1-wireless thermostat, 1- wireless receiver and 1 internet bridge. I purchased the system in november last year, all worked fine for 3 weeks and then gave me "no remote access" on the wireless receiver, i found this out whilst waking up in the morning to the heating being…
-
Vsmart zero tado 10
Well what can I say. I have had a Vaillant boiler for the last 15 years and about 4 years ago it failed and as there were so many issues with the inbuilt water storage I decided as it has done quite well to buy an 800 series ecotek. As part of this process I decided to embrace modulating heating and purchased the vaillant…
-
Temperature control in lounge.
Hi, I have two radiators with tado valves and a tado thermostat all in the lounge, I did this because I also have a log burner in this room. When the log burner is on I don’t want any heat from my combi in the lounge but want the combi to heat other rooms. Can I group the valves and thermostat to control the lounge…
-
Multi zone nest replacement
I’m hoping someone can help here as tado support suggest what I want to do isn’t possible but other threads on here suggest it should be. - I currently have a nest setup with three zones, on per floor. - All the heat links for the nest thermostats are in the garage next to the boiler and hot water cylinder. - The ground…
-
Energy IQ
Hi all Does anyone know how I can change the metrics for Energy IQ from € to £ ? Many thanks
-
Worcester 2000 Comfort+ II RF
Hi, I bought a new tadoº Starter Kit V3+ yesterday. I tried to set it up today, but when I scanned the Programmer, it asked me to search for my boiler (which is a 'Worcester 2000' with the 'Comfort+ II RF' wireless thermostat). It said I would have to contact support, so I tapped the button to do that and I just got a…
-
Why does Smart Thermostat call for heat, when it is passed the target temperature ?
as the description why does this happen ?, target is 17.2˚c, room temp is 17.6˚c, but yet tado is still calling for heat ?????
-
Overriding setting
Excuse me if this has been asked before but I couldn’t find it. My heating is set to 20 until 10pm. I have found if, for example I want to bump up heating to 21 at 9.30, I would have thought it would revert back to set ( overnight) temp at 10 pm (ie 15deg). However, if I bump it up, it stays at that new target temp,…
-
Upgrading from V2 wired to V3+
I currently have the V2 thermostat wired to my boiler and TRVs on every radiator in the house except in the bathroom. I am upgrading, largely for the HomeKit integration, to the V3+ wireless starter kit. I’m now wondering whether it is possible to: swap the bridge from the old one to the V3 leave the V2 Smart Thermostat in…
-
Replacing Honeywell THR872C Wireless Thermostat
I am installing a Tado wireless thermostat to replace a Honeywell wireless unit. I am not sure which wires to connect together to bridge the thermostat. I have the following connections. Blue to N terminal Brown to L terminal Jumper from adjacent L terminal to A terminal Black to B terminal I think that I need to join the…
-
Apple Home app - temperature being displayed as 'heating to'
Is it a common thing that Apple Home app shows 'heating to' rather than the actual temperature? Even if the temperature is higher (21°), the app shows the current heating program (20°) If I turn the heating off the actual temperature will finally appear on the screen (21°) ¯\\\_(ツ)\_/¯
-
Is this correct……..
Hi all, I have 2 smart radiator thermostats and a wireless smart thermostat in the living room. I then have a bathroom and 2 bedrooms with smart radiator thermostats only in each, these are in the app as 4 separate rooms. Do I need a wireless smart thermostat in every room in addition to the radiator valves or will the…
-
thermostats
why there is a difference of 2 degrees or more between the thermostats and the room temperature. Can we also expect the Polish language ??