-
Double checking Honeywell to tado
So I have a Honeywell cm701 in the hallway and was told I need the hardwired starter kit. Done, brought, last night paired the tado unit with the WiFi bridge. on my Honeywell there is only 2 wires connected in the connections. There is a A and also a B on the left side. So when checking via the app for the install, it…
-
Boilermate 2000 wiring
I'm upgrading from a tado extension (CH only), to a tado V3+ with CH and HW control. I have a boilermate 2000, and wondering on the correct way to wire it. My current Tado is connected to the 'roomstat' terminals at the bottom of this image. Terminals 21, 22, and 23 are bridged. Meaning the tank is kept hot 24/7. When the…
-
Wired thermostat+ smart radiator valves
Hi all I have a wired smart thermostat V3+ Starter kit with internet bridge which turns the boiler on and off and I am looking to get some tado smart radiator thermostat valves, do they work through the wired smart thermostat to turn the boiler on or will I need the extension kit to the boiler. I have a traditional boiler…
-
Is thermostat blowing my fuses?
I had a wired Tado thermostat installed about a month ago (plus 2x Tado TRVs). A week later the fan on the boiler blew out. Got that fixed. Then the fuse on the boiler plug socket blew. Replaced that. Then 24 hrs later, it did it again today. My Tado app is telling me that the stat called for heat this morning and that…
-
Radiator spraying black water
Hi I’ve got 6 Tado radiator valves in my home and am trying to install a 7th. However when I unscrew the old TRV, the valve starts spraying out black water with a lot of velocity. I’ve tried this twice and had to screw the TRV straight back on to avoid water going everywhere - screwing it back on has actually been very…
-
bought new house with Todo. it's rubbish
Could someone please link me to a simple guide? Been looking at this stuff for days. App tells me it's fine. Thermostat seems to respond and rads do things and light up. But the boiler never comes on and I'm frigging freezing my butt off. So far this modern rubbish is not performing and almost ready for the skip
-
Can't Decide Which Tado I need
I'm sure this is a common question but any help appreciated. I have a Potterton Profile, old fashioned exchange boiler, wired thermostat and a Drayton LP722 hot water and heating dual channel controller. Fairly standard setup. Looking at the Taco compatibility list I'm slightly confused and I want to control my heating and…
-
A novice considering a Tado Solution so any assistance would be appreciated
I have been doing a lot of research as I was considering just replacing my Dayton wired thermostat with a smart wired thermostat which is compatible with Apple HomeKit. But the more I research the more confusing it is, as it seems I need to also change my boiler controller as well. The current boiler controller is also…
-
Tado App for android won't connect. PC works fine
I get the error: "tado" links are blocked it looks like the webpage at tado://oauth2redirect/tado....might be having issues or it may have moved permanently. I have reinstalled, deleted the cache etc. Same result
-
Manual override following loss of power/internet
Hi, I have been using TADO for some time now and its great. However, yesterday for the first time, I experienced a problem. Having lost the power supply to my router overnight (blown fuse) my heating failed to come on as expected. Everything eventually worked fine once power had been restored but it was very cold until…
-
Selective adjustments
Does anybody know if it is possible to limit my teenage daughter from upping the heating temp from the app?
-
How to turn of rest of house heating
Sorry if this is a daft question but how do you get the heating to turn off. The rooms where I've replaced the thermostatic radiator controls are good as gold, they turn off they're comfortable. But I've a few rooms without them and they just never switch off, they are constantly drawing heat. I bought the system to try…
-
Tado & Alexa
Hi, I've just installed the tado starter kit v3+ and connected it to Alexa and I need a little help! What voice commands do I use just to switch the heating on and off? and can you ask for the heating to come on for say 15 minutes?
-
Change default action when remote access is lost
My thermostat lost remote access from 06.00 to 12.00 and proceeded to heat the house to nearly 25 degrees. Is it possible to change this so if remote access is lost it doesn’t heat at all? cheers
-
Is it possible to set child lock status via API?
I need to set child lock status via API. Does the TADO API currently have an endpoint to handle this function? Thanks in advance!
-
No sustained hot water after new boiler installation
We had a new combi boiler installed yesterday (Viessmann Vitodens 100-W) with Tado Smart Learning thermostat and Smart TRVs. However, whilst the central heating is doing ok (although the radiators feel cooler than under the old boiler), the water heating is struggling - we might get a flow of hot water for a minute or so,…
-
broadband down for 24 hours - can I get to the bridge onto the internet via my laptop?
My internet is down for the next day. It's currently 3c and the met office has issued a warning of ice and snow tonight. Is there a way to get to the internet via my laptop? I've hotspotted my phone so the laptop is online and I've plugged the tado bridge into the laptop but it's still flashing offline and it appears to be…
-
Just moved in and need help please
We have just moved in and tado was already here. we have downloaded the app. Connected our smart thermostat and Internet bridge to the app. Our hot water is fine as have that set to eco so heats on demand but our heating is doing what it wants. We have set the heating to come on at certain time and temperatures but it…
-
Have 2 internet bridge on the same network?
Hey I'm looking to buy a house where they have ground source heat pump system in building "A", that provide heat to building A and B. The main building, aka the house, is building B. But the control to the heating system is in building A by the heat pump. So what i wish to do, is to have a "Wireless Temperature Sensor" in…
-
App hangs trying to add devices (spinning circle)
Hello, I'm new to Tado, using it with the Android phone app (v6.33.0). Adding the bridge and wireless receiver worked ok using the phone's camera and QR codes. After that, once I tap "Add Device", I get a spinning circle only, and then it either hangs there indefinitely, or loads the "Scan device registration details" page…
-
Basic questions from a Newbie
Hi, I'm trying to get started with tado and have a question. I have an old Trianco boiler controlled by a Honeywell Controller. I have 12 radiators. They are also old - I plan to get a plumber to replace the body with a Drayton TRV4 body. The tado compatibility chart says "no adapter needed". I will add tado valves to all…
-
How accurate is the humidy indicator?
I often get indication of high humidity, even when sensor is next to open door. In excess of 60% yet we have no issues with dampness or high level of humidity in our home. Just wondered if sensor may be giving false data...
-
Wiring smart thermostat to Ideal Logic Combi 30
I had a heating guy round today to install my Tado thermostat but he got confused by the diagrams in the installer manual (I guess they’re not what he’s used to in the UK?) and wasn’t sure he’d wired it up right. Fast forward to tonight and despite the thermostat calling for heat, the boiler isn’t coming on, so I wondered…
-
Tado Wiring support
Hi, Just purchased my new Tado kit v3+ and trying to work out the installation as I have an old house with the boiler outside of the house and the current wiring is out of this world. Could you tell me if my current setup would work with Tado or I'm going to burn it the minute I connect it. NOTE: the current way is that…
-
Two radiators in one room, one is poorly heating up Comap TRV
I recently had bought a Tado thermostat in the living room with two TRV's with two Tado buttons on it. The radiator in the front heated up really well but the one in the back did not. It took some time to figure out what went wrong. The TRV's I did install for the job were from Comap. After struggling with the problem I…
-
Wireless sensor set to measuring device in a room with no zone controller still activates the zone
I am intending to control a bathroom's ufh by replacing the original wired thermostat/timer (on the outside wall of the bathroom with a remote wired sensor inside the bathroom) with a TADO wired thermostat combined with a wireless TADO sensor inside the bathroom. I'm trying this out first by using the Kitchen TADO wired…
-
I installed a Smart V3 kit to my new boiler. The heating is on regardless of temp set
I had a Worcester Bosch Greenstar 4000 combi boiler recently installed and decided to have a Smart V3 wired kit installed. When it is connected the heating is constantly on with radiators getting red hot. It doesn't matter what temp the thermostat is set to. It just constantly heats even when switched off on Tado. Please…
-
Water temperature
Hey guys, is there a way to know the temperature of the “hot” water before turning on the boiler to heat the water? Is there a hardware I should add to the system? thanks m.
-
Bridge problems
Hi, I have been using the Tado system since September and have 16 devices connected, it has worked great and we love the system, I have been an avid follower of this forum and a lot has been written about the loss of connection of the internet bridge, I have been dreading having this problem, anyway it has started this…
-
Smart AC Control V3+ Additional Sensor
Are there remote sensors available for the Smart AC Control V3+? Use case - office with one ducted aircon unit supplying 3 offices and 1 reception. Would like to monitor each room and reception, and ideally change which sensor the air con reacts to. Alternatively, would four Smart AC Control V3+units work? 🙄