-
Not working
Only installed for 10 days will be removing as the cost for the system and it has a mind of its own it loses contact then leaves the heating on think the internet bridge is not fit for the job
-
Should batteries be considered as "Goodwill"
I have bought 12 Tado TRV's and in less than 6 months I have had to replace 6 batteries. When tested they were half flat. Having escalated to Tado, they advise that batteries are provided as "Goodwill". My counter to that is that tyres on a new car, are they considered as goodwill. Seems they are not prepared to shift on…
-
Can I read temperature and motorposition from tado thermostats
Hi' I've used Danfoss link for a while, but it is closed system and they really screwed their customers, so I'm looking for something else. Since I need to have the radiator system and my air to water heat pump play together, I would like to (I need) be able to read: 1) Temperatures in rooms (not sure if tado thermostats…
-
Feature request - Extra lock pin
I find it too easy to un-mount the thermostat from the radiator. If a person who has no experience with the thermostat wants to change the temperature and he/she grabs the thermostat and starts turning it, chances are that they will unintendedly dismount the thermostat. This happened to me yesterday. I occasionally rent…
-
Viessman,Tado wired Thermostat.
Good afternoon, I have got a Viesmann 100-W system boiler with a Heatrae Sadia Megaflo. I have the Vitotrol 100 UTDB-RF2 wireless thermostat/programmer. I have the wired Tado smart thermostat in and connected to internet but have been informed I need the extension kit also. I have also been told that this will not control…
-
Fahrenheit to Celsius
My smart A/C control v3 and app on my phone show only Fahrenheit. How to change to Celsius?
-
Ideal boiler not responding to call for heat/hot water
I've had an extension kit fitted today to an Ideal Logic Max Heat via OpenTherm. When I call for any heat/HW, the boiler does not respond, and only shows the standby '00' code, and no error message. All devices are paired, and firmware updated (81.1 on extension kit, 54.20 on thermostat). Thermostat is set up for OpenTherm…
-
Replacing BDR91
I have got a BAXI 130HE combi boiler, my bdr unit is wired to A and B (no earth, plug in boiler). Am I right in thinking these should go A->CH Com and B->CH NO?
-
Internet Bridge questions
I've been having problems with devices losing their connections to the internet. It has happened several times. On one occasion, the Wireless Receiver got stuck in the ON position in the middle of the night, and all the radiators got ridiculously hot. Most annoying. And I had to reboot everything to fix the problem. I have…
-
Adding hot water control
I bought a Smart Thermostat Starter Kit - v3 and several smart radiator thermostats back in 2018. It's worked well for the heating but we've never been able to control the hot water separately from the heating as we don't have a three way valve to enable that. However, we're now looking into getting a completely new tank…
-
Frost protection and air intake behind radiator
Hi! When I study the recorded temerature graph, I can see that the temperature lowers and rises in a wave pattern, which indicates that the smart radiator valve restricts the water everytime room temperature reaches the scheduled setting rather than finding the correct static restriction for the desired room temperature. I…
-
No heating only hot water
I installed our receiver, bridge and thermostat following all instructions. When I test the hot water it works fine, heating test fails and I cannot work out why. I got the product through my energy supplier and I’m wondering if I have been sent an incompatible one. We have a glow worm boiler, we have a hot water tank and…
-
Hot Water Relay not activating- Wireless Temperature Sensor - link
This is not a question more of an observation that may help. I have installed a Tado system with the wireless receiver, thermostats etc. This system came with the Wireless Temperature Sensor, but I found I didn't really need it as everything was being controlled via the thermostats. So initially everything worked, CH was…
-
Is Tado Compantible with my heating system?
So I purchased Tado for my old house which has 2 zones + hot water. Fast forward a few years I am now in my new house which also has 2 Zones + Hot water. But this time the programmer has 3 Channels I am unsure if Tado is compatible. Here is the current non-Tado setup I have and the wires attaching to it: 1x Wired…
-
Is there an issue with the app offset temp settings?
Is anyone else experiencing a problem with the app with the temp offset setting, as not showing the current temp or offset temp when wanting to adjust. I've checked the app on my wife's phone and the same.
-
Turn on/off individual rooms/zones
I like the global on off, but I want to easily turn a room off (Frost control) and on ( resume schedule) easily within the room, without having to manually reduce the temp and then select "forever" in case it reverts to schedule after the next event. Can you put a button in there to do that?
-
Always-on Underfloor and Radiators advice
Hi folks Looking for advice before buying a set to Tado gear to make sure I’m getting the correct products. I have an exhaust air heat exchanger keeping the hot water at temp. This is backed up by a gas boiler for heavy use times. Upstairs each room has a radiator so I plan to add smart TRVs from Tado. I think that’s…
-
Two radiators not working since I have installed Tado TRV’s in other rooms
Please advise or possible remedy
-
Which Tado products for water UFH
We're renovating a house we just bought and looking to install smart heating but I'm confused on what we need..! We have already installed Tado smart TRV to the radiators (4 bedrooms have the Tado smart TRVs, with one of the rooms having the wireless temp sensor and the wireless receiver connected to our combi boiler). We…
-
No remote access, or is there?
I've trawled through the other posts on the subject and I can't find a solution, so here goes.... Long time Tado user, since 2018, with 13 TRVs, a Smart Thermostat and Internet Bridge v3. Mostly worked well over the past 4 years until around 48 hours ago. House broadband connection was down for half an hour, and since it…
-
Can Tado interfere with Zigbee (IKEA Tradfri specifically)?
After installing Tado (2 radiator thermostats, a wireless receiver, internet bridge and temperature sensor) in my house, almost at the same time all 7 of my IKEA Tradfri devices (all endpoints) stopped responding while the rest of my Zigbee devices are still functioning normally. Tado uses 868 MHz and Tradfri 2405-2480…
-
Tado learning problems after install?
Hi - I'm hoping someone can help me with some issues I'm having with a new install of a Tado V3+ starter kit. I should just say that I do already have a V2 kit so I'm fairly well versed in all things Tado. My problem refers to my partners house where I recently installed the V3+ starter kit with her Worcester Bosch 24i RSF…
-
Heating Not Turning Off when hits temperature
Over the past week I have been having a nightmare & paying over £15 a day for my gas! I have a thermostat and also valves in each room- which I fitted only two months ago. When the thermostat/main stat is on and set to say e.g. 18 degrees, once it hits this level - the heating isnt turning off and is continue to soar into…
-
2 homes connection
Hi I have brought 2 of the starter kits 1 for home and 1 for our static caravan the one at home works fine but the one in the van just will not connect it all seems to pair up but that's it any ideas or do I need 2 phones to connect the 2 systems thanks in advance.....
-
Radiator heating when it’s not suppose to!
Radiator not working to the schedule it should. Coming on when it shouldn’t. Heating to higher than it should. Huge energy costs incurred. Terrible service received. Has anyone else had the same? What can be done?!
-
Central heating not getting to temperature
Hi All, I wonder if anyone can help or has experienced a similar issue. We have a system boiler that is likely 20 years old and a water tank on the second floor for storing hot water, which has its own thermostat. The central heating had a wall mounted thermostat in the living room before we replaced it with a wireless…
-
can my extension kit control water & heating?
I have a Tado + extension kit that is wired in similarly to below. At the moment it just controls heating. I'd like to control hot water through Tado too. Can the extension kit I have do it? or do I need to buy a new system that includes hot water control?
-
Temperature offset not loading
On my android devices the temperature in each room where I have tado device or radiator thermostat it will not load so I'm unable to adjust the offset, does anyone know when this will be fixed
-
Which Tado product?
Hi, My current home heating has 2 independent Zones. Zone 1 control the combi boiler for heating and hot water, and have a remote Honeywell thermostat. I have replaced this with Tado Starter Kit Wireless Smart Thermostat V3+. Zone 2 is controlled by a Honeywell CM707 located in room A. Question 1: Is Tado Wired Smart…
-
Smart thermostat on wall has lost display but tado app still seems to work. Can I leave it like that
Hi all, The smart thermostat on my wall used to have a glowing white display on it which showed the current temperature and you could also do things like set target temperature and so on. You operated this by pushing a button on the smart thermostat. However for the past few days, when you press the button on the smart…