-
Tado to control electric heater
I have a storage room with a traditional (non smart) electric heater. I'm looking for a way to control the temperature in that room from my smart home setup. Is it possible to get a tado thermostat to control that heater in any way? Would it be possible to control a smart plug based on the temperature and connect the…
-
Tado Won’t Turn On Hot Water
I have a tado system for a while. Yesterday I ran out of hot water as the tado is not turning on the hot water according to the schedule. It turns on the heating ok. Issue seemed to have stared after the smart thermostat needed new batteries. I put new ones in and it’s all connected. Have rebooted the extension kit too.…
-
Extension Kit not connecting
Hi there, I'm new to Tado having bought a house with a system already installed - this morning we had no hot water and on checking the App, both the Smart (Wireless) thermostat and the extension kit next to the water tank were offline. I've manually restarted both devices, the smart thermostat has come back online, but the…
-
Heating n hot water settings when away on holiday for 7 weeks
Hi. We are not gonna be home for 7 weeks. Is it ok to turn off heating n hot water from tado settings?
-
Will my UK extension kit support ebus?
Hi all I've got an old tado thermostat (2018) + extension kit (2020) and a vaillant ecofit pure 835 combi boiler and the boiler's getting moved so needs rewiring. The current wiring piggy-backed off the old wiring that was originally there for the previous system boiler with the extension kit taking the place of the old…
-
SRV two different zones
Hi, I have the following zones: Hall (1 temp sensor), Living room (1 temp sensor & 1 SRV), Bedroom 1 (1 SRV), Bedroom 2 (1 SRV) Bedroom 3 (1 SRV). Is there a way of setting up my tado so when I set the temp/ask for heating for the hall, it will open all SRV. But I can still have all the individual zones too. So for example…
-
V3+ Receiver controller doesn't believe I have two control valves
I've just installed the tado V3+ unit in place of my Danfoss FP75. The closest one the Tado app can find is what they call an FP975, which looks identical. The Danfoss runs fine with my Vaillant Ecotec plus 615 connected to a two valve system. The 615 is a combi capable boiler but not used that way - I prefer a hot water…
-
Internet Bridge Pairing Light Flashing
Have just installed 3x Smart Thermostat Rad Units. All paired and working correctly. However since the installation the pairing light on the Internet Bridge is flashing continuously. Has anyone any ideas on what it means and how to fix? TIA
-
New Setup Help
So I am installing TRV's on all my rads, I have the main hallway thermostat connected to the boiler to trigger and call for heat. Now I have added a wireless temp sensor into the main rooms. How do I setup, so the person in say Room 1 can set the temperate on the wireless temp sensor, so that opens the TRV on Room 1 at…
-
Alternative system that would link to Tado?
After three years, Tado still don't seem to have the facility to incorporate an electric fire into their system. That being so, we will probably need to switch to an alternative. Any suggestions anyone?
-
New to Tado - Will this work?
I moved into our house in May and would like to get Tado up & running before winter. The house has a Ideal Logic+ C30 combi boiler driving 9 radiators and water based underfloor heating in the kitchen. There are two Salus wireless thermostats, one for the main household heating and the other for the underfloor in the…
-
After Battery change in my room stat my heating will not turn off
I recently changed the batteries in my tado room stat now My boiler does not turn off, I have had it for a few years & this is the first time I have had a problem. Does anybody know how to fix
-
What is "Air Freshness"?
I can see the humidity in the graphs for each room. Separately from that, I can see the temperature and humidity under "Air Comfort". Those make sense to me because I know that Tado monitors the temperature and relative humidity. What I don't understand is what is meant by air freshness. Is that based solely on how many…
-
Central heating not turning on
Hopefully someone can help me, i got my Tado kit sent to me today from OVO, it included wireless receiver, wireless bridge and a wireless thermostat. Set it up and followed instructions to the T, however my central heating is not coming on, the light on heating is lit up and on my app i put radiator up to 25 but still…
-
Added smart head to room with thermostat
Hi can someone explain how this works please, so have my wireless thermostat in the living room and added a smart trv to existing rad in the same room, so all house bar bathroom has the smart heads. So how does Tado control the heat in this room now or have I wasted my money ? Thanks
-
My tado thermostat isn't working, it won't change temperature, it's showing symbols like an O and c
My tado thermostat isn't working it is showing symbols like an O and two facing c's
-
How to make use of the (paid for) 'Balance' service without also paying for a Heat Pump Connector?
Hi. I have a fairly new build (2020) with an air source heat pump. It has a set of John Guest wired thermostats (Yuk). A lot of manual tuning every time I want to change the setup. And with an Octopus agile schedule, there is a lot of tuning to make the most of it. Time to look for something better... I purchased a Tado…
-
Boost- temperature setting
I like the new ‘Boost’ setting, but may I suggest an improvement. ... that would be to allow the user to set the boost ‘offset’ temperature. simply jumping the temperature to 25 seems a little extreme, especially if you forget you’d done it (though I accept at 25deg you probably wouldn’t forget for very long!) So, being…
-
Do I actually control hot water?
Hello, I am not sure I actually control hot water. I have hot water, and the heating works fine, but the hot water has been turned off in app for three days now. I would want to save a bit on electricity bill by not having hot water on at all times, as it seem the case is now. Old System: danfoss fp975 controller; Valiant…
-
is the v2 internet bridge also compatible with v3 plus devices?
I recently bought a house with Tado V3+ equipment, problem is that the previous owner accidently lost the internet bridge. Do I need to buy the V3 bridge? Or would the V2 also work
-
Serial number / age
I have a variety of different radiator thermostats and I’m looking to phase out the oldest. Do the serial numbers indicate age and/or model? E.g. I have; - VA183461XXXX - VA206818XXXX - VA380070XXXX Are they oldest to newest in that order? Thanks
-
Designing setup for my flat
Hi team, I have been using tado for a while now, slowly adding to my setup, but now I have more devices available, I'm not sure if I have designed my system the right way. I would love to ask for your point of view. My flat has 2 heating circuits, controlling Zone 1 and Zone 2 independently. I have replaced both old wired…
-
I have sky glass 2 pucks and tado. My internet is provided by Three. My tv freezes all the time. ?
Can somebody help from Tado
-
An’Offset’ idea … will it work?
Just fitted 5 Tado Smart Rad controls. In a couple of the rooms the TRV (SRV??) is inevitable very close to or even behind a curtain when its pulled back. Whilst I suggested that maybe we should get shorter curtains, she-who-must-be-obeyed wasn’t terribly amused 😳 But hang on. Is this where setting an Offset would come in?…
-
Possible to delete incorrect heating data?
Hi! I was having my boiler checked the other day and the heating engineer asked me to turn the thermostat to full so the heating would kick on. All good, no problem - turned Tado to 25c, boiler turned on. He then turned the boiler off, and I forgot to set Tado back to schedule mode. Thankfully, the boiler did not continue…
-
Smart valve showing offline
Hi I’m new to this - my system was installed yesterday and I have noticed my bedroom valve is showing offline on the settings part of the app but showing online on the home page - help please it’s driving me nuts - moved my bridge so it’s prominent and we live in a bungalow so no real distance - I can still change them…
-
Considering Tado - EU or UK version for EMS control
Hi all. Im in the UK and have a Worcester Bosch Greenstar 25Si Mk4 combi boiler. It has EMS bus compatibility available, which I understand the Tado system is compatible with so that I can get full smart control of the boiler flow temperature from the Tado device. However as Im in the UK, the version of the Tado thermostat…
-
Opentherm and weather compensation?
:s can someone please advise me on what unit/system I need to buy to use Opentherm/weather compensation with a wireless thermostat.
-
Hot Water Stopped Working
I have just installed my V3 system and it was working well. However, the hot water control has now stopped working: • all wifi connections are working. • there is power to the HW Com and NC terminals. • however, when selecting HW On via the app nothing happens and there is no power to the HW NO terminal. • pressing the HW…
-
Honeywell hot water and heating programmer
Hi all, I've recently got tado myself and now my inlaws what it themselves. They currently have Worcester boiler and a hot water tank. It had a honeywell thermostat in hallway and a honeywell water and heating programmer by the hot water tank. Am I right in thinking I'd just replace the stat in hallway with a wired smart…