-
Connections all used to work, just updated Tado app now no connection to my system😡
Not happy, everything worked fine until I updated thr Tado app, now I cannot connect to my system
-
Replacing Danfoss TP4000 with Tado
Hi all Just starting installing my Tado, but it's stated my Danfoss TP4000 is not compatible. Which I find strange as I installed my parents a few years ago with the same Danfoss TP4000 thermostat. Any help would be appreciated. Regards Lorna
-
Dual TP4000
We currently have a newish build house which was fitted with two Danfoss TP4000 controllers in the lounge and master bedroom. We had a new Ideal Logic Combi c30 boiler fitted two years ago and have noticed in the past week that the controller in the master bedroom is beginning to fail which is not ideal this time of year…
-
Wired stat only?
Hi all I was called out to a customer with a DRU02-TA-06 on the wall, an internet bridge, and according to him no receiver. It's wired using Open Therm to an HRE36/30 Intergas combi boiler. On the app, he can turn up and down the trvs in the rooms, but can't get the stat to fire the boiler. Is it possible that the stat…
-
Thermostat display not working
Hi all My thermostat display has suddenly stopped working; when I press the button, nothing appears on it, so that the only way I have to override the temperature is via the app. Is there anything I can do? I read in another thread that a guy, who was having problems with his thermostat display was suggested to replace its…
-
Force boiler to fire on a schedule
Hi, My existing system was a simple gas boiler connected to a segmented timer. When the timer was on - the boiler fired, and it would heat (1) the hot water, (2) the underfloor heating and (3) any rads that the mechanical TRVs were open. There was no thermostat. I've added Tado TRVs to most of the rads, and added a…
-
Tado humidity’s accuracy
My dehumidifier and also hygrometer are showing 69% humidity. Tado is saying 79%. I think Tado is off. Anyone else has the same issue?
-
Not requesting heat: Vaillant HR solide Plus VHR30--34/3-5combi
Here some pictures of how it is installed: https://imgur.com/a/t8KX5K2 I’ve tried installing with settings D01, D05, D06 & D07 HC1 & HC2 Somehow I keep getting error code S30, and the thermostat doesn’t give heat request to the boiler. If I put the boiler in diagnose/maintenance mode then it does manually send warm water…
-
Wireless thermostat temperature control clarification
This might be a total stupid question, but I'll ask anyway 😔. Got a new boiler fitted yesterday and tado wireless v3+ thermostat. Am i correct in assuming when I set the temperature of the thermostat to the desired temperature I want e.g 21c. This just turns the boiler on and heats the room until it reaches 21c. Basically…
-
Should tado° open up their system for cloudless control?
About a year ago I had contact with the tado° support and I complained about the lack of control I have over the TRVs. The TRVs are quite sophisticated and even seem to support how much the valve opens. This is completely controlled by algorithms in the cloud though. Without Home Assistant, that shows me tha valve opening…
-
Do smart radiator valves override the thermostat?
I'm sure the question has been asked and answered, but I haven't encountered 100 % what I'm looking for. Also, in this (https://community.tado.com/en-gb/discussion/1257/how-to-override-smart-thermostat-with-radiator-valve) discussion, some tado person seems to apologise for something being impossible. That scares me. ;) So…
-
How to delete and reinstall an Internet bridge
I've just added a new wireless starter kit to my boiler system. The Internet bridge says "complete installation " and when I click on this it asks me my make of boiler etc and says "incompatible". I'm confused as when I switch the heating on with the tado it fires up and works so surely it is compatible? I'm very confused!
-
Geo location - last out of the door
1. How many mobiles can the system support with regards to geolocation? 2. If say 4 mobiles are at "home" but leave at different times, does the system look for the "last out the door" before it acts? 3. When it does act, does it turn off any schedule which is on or just turn down the heating? If it turns the heating down,…
-
Tado with Worcester Greenstar 37CDi
I currently control my Worcester Greenstar 37CDi combi boiler in the lobby with a Nest learning thermostat in the lounge (Nest heat link in the lobby). I have a total of 14 radiators in my house, 12 with TRVs and 2 without. I would like to replace all the valves for Tado Smart TRVs and do away with the Nest. Can I fit Tado…
-
multizone - 2 channel zone valve heating
My house is currently setup for 2 heating zones (upstairs/downstairs) with zone valves fitted in the pipework for each zone. I really want to be able to operate each radiator independently in each zone so looking at Tado and moving toward the Smart Radiator Thermostats. I have a Grant combi boiler which is wired into a…
-
Please help me!
Hello, can I only install smart radiator thermostats valves in all my rooms without bridge or main thermostat hub and control them all on the app ?
-
Remeha avanta E1 Error
Hi, I'm getting the E1 error on the Remaha Avanta boiler, which indicates that there is some air in the pipes or not enough flow in the pipes, I cleared the air from the radiators and rested the boiler and it worked fine, then again today same error message, I asked the service people for the boiler they said the Tadoo…
-
Can anyone help me with wiring please
Hi everyone, I have a dual zone ESI system that I'm trying to install Tado to replace. Lounge looks straightforward and as the app but upstairs one has been used as a piggy back for a ring external siren and as such I have 3 extra cables that obviously the app wasn't expecting and doesn't tell me what to do with and I also…
-
Heat specific device with any call for heat
Is there a way I can heat a specific radiator (with smart thermostat) when there is any call for heat on the system? I know I could just fit a lockshield both sides of the rad but I also want to be able to call for heat on this specific radiator at other times.
-
Swapping out honeywell Sc9420c programmer and wireless thermostat
I'm looking to replace my wired honeywell programmer and it's wireless thermostat Sc9420c…
-
Reccomendation for a small 2 room setup
Hello. So first of all, i have a central boiler system at my place, which controls all the radiators in the house. I have 2 rooms and one kitchen (only one floor) in my apartment. I want to control (only) the 2 rooms separately, with TRVs. I do not want any cables in the rooms, so the reciever/wired thermostat should be in…
-
Vaillant Ecotec Plus 418 non-combi using Tado V3 starter 'combi' control (for digital ebus)
Hello, I have a Vaillant Ecotec Plus 418, I have acquired a Vaillant VR65 wiring centre and I can get a Vaillant thermistor for the hot water although this is optional (cylinder stat can be used) but required if the temperature is to be controlled digitally. If I buy the Tado V3 starter kit which seems to be listed as for…
-
Brotje
Same one how use Tado with Brotje WHBS 22 D?? Work good? Now i have modulating thermost Netatmo over OpenTherm and thermostat doent support control hot water - i can heat hot water only manualy.
-
I have a tado smart thermostat and my radiators have smart thermostats.
I have a tado smart thermostat and all but one (the bathroom ) of my radiators have smart thermostats and sometimes the smart thermostat asks for heat when the radiators do not. Consequently the boiler is running to unnecessarily heat the bathroom towel rail. what should I do? I’m thinking the smart thermostat is not…
-
Baxi Luna Air (new models) integration for diagnostics
Hi, I purchased a complete Tado system (wired smart thermostat kit V3+ and 8 Smart Radiator Thermostat V3+). At the time of purchase I requested compatibility with my boiler (Baxi Luna Air 28, brand new) which was confirmed. The system globally works very well, it controls the boiler by modulating the delivery temperature…
-
Plug required?
Hi there, I recently purchased a Starter Kit VS, Wireless Smart Thermostat Incl Programmer with Hot Water Control My boiler is a Vailant EcoTEC Pro and I have previously not had a Thermostat. I have managed to set up the Thermostat and the Internet Bridge. My issue is with the Wireless Receiver. The instructions advise…
-
TADO Thermostat Integration with Heating Setup: Guidance Required
Current setup details: 1. Bathroom Dual Control Switch: Indicator for “sink” and “bath” with light indication upon operation. Used for hot water cylinder with electricity. 2. Vortex Boilerhouse: • Electrical Supply: 230V 50Hz • Output Options: 15.0 kW to 26.0 kW • Pump Pressure: 10.0 • Fuel Type: Kerosene 3. Manual Timer…
-
Vaillant EcoTec Pro 24 - plugged in
Does anyone have Tado set up with the EcoTec Pro 24 WITHOUT having to plug the receiver into a mains socket? IE Have you been able to wire the receiver directly into the boilers electricity supply instead? Thanks in advance
-
New installation with Vaillant - questions and doubts
Hi! I've decided it's time to upgrade my old heating installation with some smart devices. Tado seems the obvious choice, but I would like to make mysefl sure about a few things, before I spend a lot of money on it. Current situation: I have a Vaillant ecotec plus VC PL 246/3-5 with calormatic VRC 430 installed right into…
-
Tado wired thermostat not working
I have installed a new Tado smart thermostat wired, however the thermostat does not trigger the boiler to go on. I have a Netfit Topline Compact 25 HRC CW4 boiler. I am not sure what control interface I have and what to select on the Config Menu ID. But I have tried multiple configs and stil does not work. Any suggestions?