-
Thermostat keeps heating all the time
Anyone has this yet, set temperature 16c and thermostat reports 18c and it is clearly over 18c but heat still on 100%. Did reset with removing battery, removing room all together and nothing helps, still reports 18c and target the same 16c but heating on non stop?
-
Heating now not working
I'm really hoping someone with experience can help out. I've had a Tado system installed since beginning of year all working no problems. Heating was turned off over the summer using the App, with the Hot Water left on. I've just turned the heating schedule back on and we are not getting any heating. Whatever I try I…
-
Which adapter for oventrop
Hey fellow tado community, I'm a new tado user and now I'm sitting here with a bunch of adapters and none of them seem to fit. I have an oventrop thermostat and I checked the compatibility list here. For me they look all similar. It seems that I have to order a special adapter. Before I do that I'm sure one of you pros can…
-
Boiler on icon
Is it possible to have an icon on the main app showing if the boiler is on off..
-
Care & Protect not working...
Hello. Due some glitch after electricity failure boiler was not responding to Tado "heat" command for over 23 hours... Temperature in our rooms was dropping down but system did not announce any issues... I would see this as typical example when Care&Protect should be alerted as usuall heating response is completely…
-
New internet bridge
Hi I recently moved into a house with Tado installed but no internet bridge. I’ve replaced this and downloaded the app. All says connected yet my heating isn’t coming on. What could I be doing wrong?
-
How do I use the app properly :-(?
I have just had my Tado installed and everything is connected and working fine. However, it just seems to ignore any schedule or instructions that I set on the app. The heating will not turn down or even turn off. My house is boiling!!!! Please help
-
USB cable
USB cable is very short on the v3+and would like to order a longer cable but I get confused with the various types ie usc c etc Can someone please advise me what I should order
-
Pairing light on bridge
Dear Tado Community, today I relocated the bridge to see if it would connect more efficiently with the receiver as recently the system keeps failing to switch off when it should - which kind of defeats the purpose of having it in the first place. So now, the bridge pairing light won't stop flashing, although the other…
-
Greenstar 30Cdi system boiler with diverter valve fitted
Hello everyone, I've spent a while searching through the forums to try and find a simple answer to my question, as the subject says, I have a Bosch Greenstar 30Cdi system boiler with the optional diverter valve and 'slide in' programmer fitted to control the heating of my unvented hot water tank. I purchased the V3+…
-
Tado sometimes stops heating
I've had a few occasions recently where the TRVs are calling for heat, but they don't get it. I can resolve it by pressing the test button above the 3 wavey lines on the receiver next to the boiler. I don't need to intervene on the boiler. I have 11 rooms. It seems to happen every few days. It was working fine before…
-
HomeKit going to sleep?
I installed a v3 starter kit a few days ago. I seem to have a repeat issue where first thing in the morning the thermostat in HomeKit is status “no response” if I go into the Tado app everything is fine and I can control it. Once I turn it on through tado the thermostat becomes responsive through HomeKit and will stay…
-
2 zone setup with 2 wired thermostat and without boiler thremostat
Hi, I think it was discussed for a long time but search is hard. I am new to Tado, just bought 2 wired thermostat and 8 x Smart TRV which my house had 2 zones for Lower and Upper floor with a wired thermostat for each floor and a combi boiler without water tank. My question is when I installed the Tado TRV to the radiator,…
-
How to improve the learning of the thermostats?
I’ve had Tado installed for a year now and in the most part I like it. However, it is always overheating rooms. I have UFH in 3 zones and set it to 20°C. It will easily get past 23°C often. I thought the thermostats were learning? I’m just not sure why it isn't better at figuring when to turn off demand in our…
-
Wireless starter kit
Have replaced Drayton wireless thermostat and SCR receiver plus Honeywell 699. Hot water works ok but CH doesn’t work. It seems the thermostat/control unit just won’t trigger the boiler. Any thoughts? Thank you in advance.
-
Danfoss RAS C2 TRV Bodies Compatibility
Can I ask if anyone is still having issues with getting flow through SRVs when boiler is called. Have spent a considerable time with support getting valves opened and delaying boiler calls. If you have issues what type of valve do you have? I have new Danfoss RAS C2 and I understand that other systems have had to update…
-
Is my current setup compatible with tado ?
Dear all, I have a Siemens RDE100.1DHW thermostat. I use this to control my heating system and also have independent control to hot water (DHW). I want to replace it with a tado system. I believe the Wireless Smart Thermostat starter kit is the appropriate one due to separate DHW. My present thermostat works with batteries…
-
how to fix devices not talking to each other
I've run tado successfully here for five years. I don't remember doing anything unusual at the start of summer to switch anything in the system off. Hot water has run as expected over the summer. Today, switching a radiator on for the first time, there's no response. The iOS app shows everything connected, but when I…
-
New Tado installation, all working but...
Replaced Drayton wired thermostat and old controller with Tado Wireless V3+ along with 6 Smart Tado radiator valves. The boiler is a Grant 21E Oil boiler. The issue I have is the central heating pump is always on, the boiler however works when required, turning on and off as expected, just the water pump on 24*7. I have a…
-
Question on modulation
Is it possible to see anywhere the temperatures that Tado is requesting from the boiler? I can see people posting them in some threads, but it's not clear to me where to get that information from. Thanks
-
Screw size for replacement
Hi, I've managed to lose one of the screws shown in the red box below. Does anyone know what size they are so I can get a replacement one from somewhere? Please disregard the wiring in this photo, the photo was taken when things were being moved around and tested. Thanks
-
Tado V3 User Open Window Detection Stopped Working When New Thermostats were Added
Hello Tado Owners, Help me understand what went wrong. I currently have Tado V3 bridge with 6 thermostats - 3 thermostats which are firmware v54.20 and 3 thermostats that I bought recently to add up which are firmware 95.10 I have the fully paid V3 app, with Auto-Assist enabled and Open Window Detection also enabled Up…
-
System calls for heat outwith schedule
Recent installation with 10 year old Worcester Bosch Greenstar boiler. System appears to be working well, however it generates spurious calls for heat outwith it’s scheduled on time, normally overnight. The preheat option is disabled, I have a Deco mesh Wi-Fi, through a cable modem. Any suggestions re cause or fix?
-
Normal radiator TRV valve vs Tado smart TRV valve
I have 9 normal TRVs valve on 9 radiators. I am planning to have a tado° Wireless Smart Thermostat Starter Kit V3+ and just 1 tado° Smart TRV Thermostatic Radiator Valve. Will my other 8 radiators still heat up along with the one with tado smart radiator valve? Or I need to have Tado smart radiator valve in all radiators?…
-
Home Assistant AND TRV-Control - beyond primitive "on/off"
--- Overview: My "Problem" is, that I want to control our Tado-TRV's beyond "on/off". But, the automation for HA, is ONLY "on-off". Plus that the "control-chef" is "not defined /unclear" (Local/Tado/HA/App). --- and, In depth: I cannot find any option, to hand the "temperature-measured" to the Tado-TRV's (like if the…
-
how to set another wired thermostat as measuring device? (not zone controller)
Basically I have two wired thermostats controlling actuator valves for underfloor heating in a big living room. One of them is in a very warm corner so it never opens the valve to heat the floor. I would like to use the other wired thermostat as measuring device only. If I set the other thermostat as zone controller, the…
-
Tado Thermostat wiring
Hi there, I’m thinking about buying Tado Thermostat but I’m not quite sure if I will be able to wiring Tado on my current thermostat wires. Thermostat I’m using now is Siemens RWB29 which is mounted right under boiler and Siemens RAA20 temperature controller which is in my living room also I think is worth to mention I’ve…
-
What's the point of having smart trv's in same room as wireless thermostat?
I'm getting some tado smart trv's but despite reading various answers I still don't see the point in having them in the same room as the wireless thermostat. Can somebody clear this up? Should I have smart trv's on both radiators in my living room where I already have the wireless thermostat? Thanks
-
Existing thermostat
Do I have to decommission an existing Drayton SCR and wireless Digistat+RF to get my Tado system to work or can I just remove the whole thing including wiring?
-
2 hot water circuits
In my house at the moment I have a hot water circuit on a tado extension box, radiators upstairs on a tado wireless thermostat, underfloor heating on separate thermostats, and the bathroom rads on a fourth circuit. The bathroom rads are controlled like hot water - there is no thermostat, just a timer that turns them on…