-
Tado Keeps overshooting and being unreponsive
Here is an example of Tado constantly overshooting the thermostat temperature. Temp is set to 19.3, and at 19.6 Tado is still firing the boiler at 66%. Other times tado refuses to even switch to 1 heating bar when easily under the set thermostat and there is no sun to warm house naturally.
-
Is the subscription worth it?
I have my wireless EU thermostat setup with my ideal boiler using OpenTherm and all the house apart from the bathroom, WC and hallway has a smart trv... is the subscription worth the money? I work from the office on Wednesday and my wife works Monday to Wed from the office. I have a 3 year old. Are the smart schedules…
-
Floor Heating Control
Hi, I am planning to replace my current manual thermostat (radiator thermostat) for my floor heating with Tado TRV Current installation 1. MMA Radiator thermostat with external capillary temp sensor 2. The radiator Thermostat is mounted in a closet that is warmer than room temp as furnace is located in closet. 3. The…
-
3 black wires: How to connect
So I have 3 unmarked black wires coming from my wall and no colour difference. There are no markings whatsoever. Previously, I had a "Toon" connected which, in hindsight uses a wireless bridge to configure the water temperature etc. However, it was still conneccted with 2 of those 3 wires to the wall. How do I connect my…
-
Smart Schedule
Hi I have just set up a Smart Schedule so that heating comes on in our kitchen in the morning. The kitchen has 2 TRVs and a wireless thermostat and are grouped into one 'Room'. It is meant to heat up at 0600 to 21 degrees. However, it isnt working. I come down this morning and the radiators are not on. Are there any common…
-
Water icon
Water icon not showing on thermostat
-
New System - Help me with my shopping list
I have a Vailliant Ecotec 637 boiler going to a EPH T47 controller controlling 3 zones (top, middle and lower floor of the house) plus HW. There are then three very flakey Honeywell wireless thermostats. It's never worked well so hoping to update my system but struggling to know what to do (and how). Can I just replace the…
-
Ideal logic system boiler with v3 uk extension - boiler won’t turn off
Hi I have an ideal logic s24 system boiler. All rads are on one zone. Boiler heats the hot water cylinder when turned on. I have removed the climote programmer and wired up the v3 wireless extension with the four wires available. Live Neutral Grey wire to CH Com Black wire to CH No 4 rads have the smart thermostats that…
-
Replace the Drayton RTS1 Thermostat to tado wired Thermostat
Hi all, Hope all of you are doing well. I would like to seek help for the below. The heating system now is a gas boiler + water tank. The thermostat I am using now is Drayton RTS1. What I see is the thermostat just got three wire to connect: N, L, "Call for heat" (NO, I guess). If I replace it to a tado wired thermostat.…
-
What does a Wireless Temperature Sensor do?
My setup is as follows: Wireless Receiver 4 x Smart Rad Valves Basic (STRV) 1 x Wireless Temperature Sensor (WTS) I only wish to heat the rooms I am using often. The question: What does the Wireless Temperature Sensor do? Where should I put the WTS (no inappropriate answers please)? If I place it in a room with a STRV,…
-
Tado shows everything working, but is not
I've just replaced a working system, with Tado, that lights up perfectly, but DOES NOT CALL FOR HEAT. Set up was ideal, so what's the problem?
-
Temperatur zu hoch
Hallo, Starter Kit V3+ mit 3 Thermostate. Doch im Wo Zi zeigt die App 1 Grad, und in der Küche bis zu 2,5 Grad zuviel an. So kann ich das nicht ordentlich einstellen. Gibt es da ein Offset? MfG Frank Amberg
-
Alarming rapid temperature spike in the morning
I have an extremely strange issue that started yesterday where my house temperature reading rapidly spikes to over 26C in the morning, despite the thermostat being set to 21C. The reading is false and the app continues to say "heating to" 21C. This is bizarre and makes no sense. Why would the app be "heating to" a…
-
Question about TRVs, Thermostat and boiler
Hello, I recently installed Tado Wireless Thermostat V3+ EU version with 6 Tado wireless TRVs. Two of my radiators are in the lounge along with the thermostat then I have 4 radiators in the rest of the house. My boiler is a Worcester Bosch 24i Junior Mk IV and as far as I can tell it doesn't support Opentherm. My questions…
-
Viessmann Vitodens 050-W 30kW & Tado
I have an original Tado wired room thermostat which worked really well with my old boiler. I have a new Viessmann Vitodens 050-W 30kW and would like to connect this to my tado, rather than the wireless one fitted, as I like the functionality of the Tado app. Could anyone tell me if this can be done and if so how?
-
Installing tado wireless e.u to a Ideal Vogue
Hello I’m looking for some advise with any one who has any experience connecting up to a gen 1 ideal vogue using opentherm. Iv managed to open the boiler and now I’m stuck 😂. The boiler is currently using a wireless ideal thermostat thermostat labelled prt4. If anyone can help me I’m willing to pay them or donate to…
-
Do I need a zone controller or can devices be independent?
Morning all. Following some issues at the weekend I realised how dependent we are on a good connection to the zone controller (which is an extension kit in the airing cupboard). We have a typical house with smart thermostats in most rooms, all on the same heating/piping boiler system. every room talks to the same zone…
-
New Tado not giving heat, as previous system
I've just installed the Tado V3+ wireless system, replacing my existing programmer. The app, wireless thermostat and receiver all say everything is working, BUT THERE IS NO CALL FOR HEAT. I wired everything per the instructions (they are really simple to understand) so don't know how I can suddenly have no hot water or…
-
Radiators coming on when I don’t want them to
Hi there, We have tado throughout the house and generally it works well. We have a reception room which we only tend to use in the evenings so have a schedule for 6-10pm for heating for that room. However sometimes the radiators turn on outside of this schedule, or fail to turn off, resulting in lots of unnecessary heating…
-
Has a recent app update messed up Energy IQ calculation.
I've put the heating on maybe a couple hours total in October and my projected month cost is £3k 😂 September reckons I had a 12608% (no typo there) increase compared to last year 😂. It also calculated nearly £1k cost but my supplier totally disagreed. So neither are anything close to true.
-
Metr reading
Hello! How to enter the meter reading if the meter has been changed. The current number is less than the last one entered from the old counter. Thank you!
-
Bosch Combi Boiler - UK (Modulation and OpenTherm)
I currently have a Bosch Combo Boiler Greenstar 2000 and a V3 Tado system (I believe wired, as it is hooked into where the old thermostat was). I keep reading about modulated flow and open therm etc - is this something I can get to work with my current system? I do notice how when the thermostat kicks in, the pipes are…
-
Changing batteries after 2 weeks
Hi. I am using a Tado system with wireless thermostat, a connection device by the boiler and a pairing kit in the router. Sorry but I am not familiar with the technical language in this matter. In the past 4 months I've change the batteries on my thermostat every 2 weeks. Why does it drain so fast and why is restarting…
-
Worcester 8000 Life Combi + Tado
Hi Everyone, Appreciate this has been mentioned a few times on here before but all posts talking about modulation etc and I admit im not knowledgeable to know what's being said - so thought id make a post and keep it simple. I have a Worcester Bosch 8000 life 35kw Combi boiler. I also have the Tado kit linked here this…
-
Tado internet connection
Hello, I'm thinking about buying a Tado V3+ Starting Kit for my old heating system working on ebus. How is Tado connecting to the internet? Does it use Wifi ? I want to limit Wifi radiation at home. Thank you
-
Domain Blocked
When trying to turn on the heating I found the App could not connect. I turned to the PC it says the mytado.com is blocked, specifically the Domain is Blocked. No error messages on the APP or the PC. So it isnt a WiFi problem. The only thing I have done recently is replace the UPS which meant the whole internet for my…
-
Will this setup work? Only using TRVs
Hi everyone, I’m new to smart heating control and advice would be greatly appreciated. People who I share a house with don’t want anything smart installed to control the boiler. The TRVs have been removed off each radiator in the house, so when the heating is turned on every radiator is on max, and the thermostat is set to…
-
Large living/dining room
Hi all, I've just installed a smart thermostat and 5 x TRVs in my home. My living room/lounge is quite large with 3 x rads in the space. Eventually I'll get underfloor heating but until that day comes I was planning to install the remaining 3 x TRVs in the space. However, is it worth me doing this if I already have the…
-
App says all devices not connected
My app says nothing connected. Replaced all new batteries. It is connected to the Internet. Tried to repairing but app says all offline
-
Connections all used to work, just updated Tado app now no connection to my system😡
Not happy, everything worked fine until I updated thr Tado app, now I cannot connect to my system