-
Compatibility
Hey guys Just moved house and already miss my tado, my new house has all sorts of stuff I’ve never seen before. I have a combi boiler and a large water tank, with a Danfoss controller and thermostat, can I just whack a tado in here and it will be all good?
-
I have just fitted my Tado wired thermostat to replace my old Danfoss thermostat.
Now my Worcester Boiler and Danfoss controller have Stopped Working. Can anyone help please?
-
Smart radiator thermostat pairing button doesn't work
Bought seven radiator thermostats a few months ago, thought I'd better get them working before winter. I have managed to pair four of them, the other three nothing happens when I press the 'pairing' button. I've tried resetting by taking the batteries out and putting them back. Nada. The wireless hub is working OK as I've…
-
Individual rooms
Hi, is there a way you can switch off individual rooms via the app? So if we’re all downstairs, it only heats the room we’re in for example, then put it on upstairs before bedtime? Thanks in advance
-
Tado system not talking to boiler after upgrade of app
My boiler/heating worked perfectly fine until 2 days ago when the app asked to upgrade. It then lost connection with all rooms and we have to restart the extension kit and the boiler. Since then the whole Tado kit stopped communicating with the boiler. Everything else is fine. The app however is now showing this hot water…
-
Why does it heat only if Wired Smart Thermostat in the status of heating?
I expect that "Living room (TV zone)" and "Living room (balcony)" are heating but they are not. What can be wrong with my configuration? "Living room (thermostat)" is Wired Smart Thermostat My Tado manages Kombi Kompakt HRE 36/30 A
-
Wireless Temperature Sensor - Redundant if SRTs on each radiator?
Hi folks, I just had a Tado system installed, and now have Smart Radiator Thermostats attached to all the radiators in my house. Each radiator is in a different physical room, and each SRT is assigned to a different room in the app. The starter kit came with a Wireless Temperature Sensor. From the way my installer…
-
Inherited system… need help
Hi, I’ve recently bought the house I’m now in and it already had a wireless thermostat system. I can’t connect!! It’s not recognising or responding to my internet to connect to the internet bridge. I didn’t install the system but assume it was a home installation by the people that lived here before. I’ve tried contacting…
-
What to do with old wireless controller?
Hi folks, I recently installed the Tado Wireless V3 kit on my Worcester 30si combi boiler. The instructions were relatively straight forward but I can't remember any information on what to do with the old wireless controller. Do I just remove it and use the Tado app? Any input would be greatly appreciated.
-
How to connect a Tado thermostat to a Nefit Smartline HRC24 boiler
I have a Nefit Smartline HRC24/CW4 STD boiler and I want to connect my Tado v3+ wired thermostat. I have a question regarding the connection at the boiler side. In the current situation, the 2 wires coming from the Nefit thermostat are connected to a ModuleLine and the 2 black wires coming out of the ModuleLine are…
-
Where did graphs go in the Android app ?
I used to be able to see temperature graphs in the Android app. Now I can't. How do I get to them ?
-
On/off modulation for Intergas cv with Daikin warmtepomp
How do I switch tado to work as on/off instead of opentherm?
-
Firmware revisions
I noticed that my Taod TRV's are on different firmware revision levels. Some are at 54.9, others at 54.12. My Tado Thermostat is at 54.8. I can not find any options to manually start an upgrade to the lates firmware. I believe this should happen automatic. I wonder then why not all my devices are upgraded at the same time.…
-
Room temperature graph not working
Hi I have today installed a TRV to my TADO system for my main bedroom today. The original TADO installation was done 2 years ago. Up till now the Graphs on the app on iOS has worked fine and able to see the temperature graphs. However at present I am unable to see the graphs for bedroom and existing living room. Is this a…
-
Wiring Smart Thermostat to Glow-worm Ultracom 30CXi
Hi, If anyone has the wiring diagram for the receiver please let me know. Thanks Mark
-
Extension kit
Hi if we have the uk receiver box installed are we able to directly replace this with the extension kit which supports opentherm? The extension kit is basically just the older receiver so is all wiring the same? The installers get confused o et opentherm so I thought just get the uk kit installed with replay then replace…
-
Ficticious heating times
Anyone else got an issue with the app showing heating happening when the boiler isn't even on? I have an old boiler and it's on or off. There is no reduced heat or heat power levels or anything else. Tado thinks it has done 2 hours heating today. It's done maybe 2 minutes. House was cold and stayed cold. Boost heating…
-
3 zones heating
Hi. I have a house with 2 floors (ground and first floor). I have one oil boiler with radiators and my existing panel controls 3 zones. One for ground floor, one for first floor and one for water. I want to make it smart. From what i found i can use todo started kid with 2 thermostats. I have one boiler so i will control…
-
How to do Multiple zones with underfloor heating and hot water with tado?
We have the following newly fitted system: a. Vaillant system boiler (ecoTEC Plus 637 ERP). b. Unvented cylinder for hot water. c. Four zone wet underfloor heating (ground floor). d. One zone of radiators (first & second floors). e. The builder has fitted cabling for the themostats in the zones. One cable for each zone, so…
-
Wired or wireless thermostat to work with a Vaillant EcoTec Plus 624?
After my Honeywell thermostat is no longer working, I'm exploring buying a Tado Smart Thermostat v3 to monitor the heating & water and want to know whether to buy a wired or wireless version. I have a Vaillant ecoTEC Plus 624 System Boiler and a Joule water cylinder. Is the Tado compatible with these and should I get a…
-
Replacing Hive with tado?
I want to replace my Hive boiler wireless thermostat system with Tado - what do I buy initially? I will also be adding 7 tado TRVs too.
-
Wiring the tado receiver to boiler
Hello, i'm not too sure if this question has been asked by somebody else but the situation in question is this. I currently have an Alpha CD25X combi boiler with a wired Satchwell TLX2259 thermostat. I have purchased the Tado Wireless kit and i've set up the internet bridge and room temperature sensor and i am left with…
-
room temperature sensors
do Tado have additional kit that actually measures room temperature and not the temperature of the air around the TRV? I have some IR panels that are regulated by a thermostat that plugs into a plug socket anywhere in the room, this seems like the better solution to me
-
Devices
I've had no issues in the last 5 years, changed my phone 3 years ago and everything was still working. Changed my phone yesterday and it won't add any devices. It's scans them and finds them but won't add them...
-
Rads heating on their own
so I have just tried to turn on the heating in one room, the TRV is connected in the app but has some blinking lines on the TRV, turned on in the app but it didnt call the boiler, I guess there is a communication issue between the TRV and the network interface and for some other reason the app isnt sending/updating I also…
-
Smart Thermostat icons
can anyone tell me what the icons are on the smart thermostat, the hand and the house? If I make changes on the smart thermostat how does that interreact with the app? is there an actual user guide that doesnt just give you specifications as that is all I have found. just testing my heating yesterday and it all went…
-
Do TRV's connect to home wifi or directly to the smart thermostat?
Hi all sorry for the newbie question, have tried to find an answer but have been unable to. So my question is, do the TRVs connect to your home wifi, and connect via that TO the smart thermostat, or do they connect wirelessly to the smart thermostat itself and do not use your home wifi? Reason for the question is that we…
-
Major Outage warning
Been a while since I've posted on here. Being the warmer months I didn't really have my central heating at the forefront of my mind so stepped away from here for a while, however the service status email I received this afternoon woke me from my slumber... I suggest anyone who hasn't already, that you visit status.tado.com…
-
Wired Underfloor Heating Thermostats - Live, Neutral, On and Off?
Guys I have two wired Toplo 7 day thermostats for underfloor heating which I want to swap out for Tado. I have 4 wires on those thermostats: LIVE NEUTRAL ON OFF Spent a good hour researching, but I cant find where these should go on the Tado. Please can someone kindly let me know what should go where, please? Thanks in…
-
Extension kit Worcester 34cdi classic
I am wanting to install a tado system to my heating system but want to keep the modulating as this works really well I have read that you can do this with the extension kit which I believe is now not available but can you do this with the new receiver box thanks