-
Is boiler on or off
Hi everyone. Is there a way to see on the app if my boiler is on or off?
-
Completely lost
Hi all, New to this but very excited about it. I have a big old house with an old kerosene boiler wired to a 3 channel controller in the house. 1.Underfloor heating downstairs (wired multi zone thermostats) 2. Underfloor heating upstairs (wired multi zone thermostat) 3. Water thanks I was reading that tado don’t support 3…
-
How can I link a particular rooms smart TRV with that person's geofence?
How can I link a room smart TRV with geofence of a particular mobile phone so that heating in that room switches on when the person that uses that room is almost home and switches off in that particular room when they leave the house ? Can you provide step by step instructions for how to set this up ? Would be a great help…
-
How to set up Thermostat with 2 TRV"s in my Lounge Diner single room.
How can I set up Thermostat with 2 TRV"s in my Lounge Diner single room. I want to control the heat in my lounge from thermostat on the wall and get it to control the TRV's.
-
Internet Bridge does not connect
Hello I have just purchased the tado kit and try as I might cannot get the bridge to connect to the internet. I only have the power light on. I have tried different ethernet cables and the LAN port light on my router does not light up when the cable is inserted. If I plug a different device in the router detects the cable…
-
Keep getting 'Accessory Already Added' error, when trying to add Smart AC to HomeKit
The Smart AC Control is not in HomeKit anymore. I have removed it also from Tado Home and reset it to factor setting several times, but to no avail. Even removed and created a new home in HomeKit, but that didn't help either. Also, changed my Wi-Fi to 2.4GHz as instructed. Nothing seems to help. What's up?
-
Tado wired thermostat
Hi, I would like to install the Tado wired thermostat but I’m struggling a little, can any help with the grey and black wires? I know the brown (live) goes to COM on Tado but in my current set up the grey wire is in COM and the black is in ON. I’ve tried brown in COM and black in ON but this doesn’t switch on the heating,…
-
Power/internet outage BCP for tado
Hi all, I am currently looking at the options for continued tado operation in our house with/during power and internet failure. As part of a broader home power outage management. Last (this yr even) we lost power several times and that obviously had a knock on to our tado operation. Have seen an increase in the past three…
-
Controller for Wolf CGW-2?
There are several controller options for the CGW-2 combi heater/boiler. The dealer, of course, recommends BM-2. Do I need anything if I am going to use it with Tado?
-
My boiler is 3 years old but 14 rads are c1975. The thermostats are from the same era.
Can I get contact details for installer in post code MK
-
Recommendation for Installer in Hertfordshire/North London
We are based in Welwyn Garden City and have tried 4 local plumbers/electricians to try and get the system up and running with no luck. Initially it was controlling UFH and rads (installed in 2014 and was working fine) however we upgraded the system and added TRVs and also the hot water scheduling.... since then we can't…
-
Towel Radiator
How do i install a Tado TRV to a towel radiator with a normal chrome value?
-
Radiator valves - how to turn fully off for decorating
Hi, I’m doing some decorating that will require me to remove a wall radiator - I have a Tado radiator valve installed and want to make sure I have this right before I turn a wrench (and potentially get very wet!) If I have the valve turned OFF in the app is the valve fully closed in that I would be able to remove the…
-
Hot water stays on regardless of schedule
Hi there guys. Years of successful Tado working and haven't changed settings for ages. But this morning I realised that my hot water was on even when it was scheduled to be off. It's set to Mon-Fri, Sat, Sun, but tried do a 7 day week one, and tried messing around with times. But whatever I do, when I resume schedule it…
-
Need some support on Tado thermostat wire connections
Hi, My current installation is as shown in the attached photo. Please guide me how to connect these cables to Tado wired thermostat.
-
"updated" the remote, now Home assistant not working
Hi! Has there beem some updates done and/or what has been done? I have a mitsubishi electric AC and first tado had controls for modes, temp and full swing on/off and fan speed and HA integration worked beatifully. I restarted the AC setup and got a new "remote" with better swing control (vertical and horizontal), but HA…
-
Cables to Internet Bridge length
Do TADO sypply a longer cable tor the router to Internet Bridge connection. I need a longer one. Have tried a modem/ethernet cable but they do not work. i have positioning issues that need the IB to be further away than possible with the short one supplied. Basker
-
Hot Water Icon
Set up Tado on new mobile phone. Water icon now disappeared. No hot water for two days. Called a heating and boiler company to take the system out and put a conventional control in. So frustrating.
-
Extension Box (EBUS Query)
After what I believed was the the right amount of research (it clearly wasn't) I purchased the V3 Wireless Starter Kit and 6 TRV's with the intention of utilising EBUS on my boiler, however, as I unpacked the box I realised it had no EBUS functionality, after poking around on this forum it seems that I need either the EU…
-
AC app timeblocks
Hi. I'm using a Tado AC control on a bedroom AC unit that I want to run from 11pm to 7am. I can't find a way to organise the timeblocks to do this without a break at 12am. The problem is the AC unit does a beep at the change at midnight which wakes me up. Is there a way to organise the timeblocks without a break at…
-
Can AC Controller and Thermostat be linked
I have a thermostat for wet radiators and an AC controller in the same room. Is it possible for them to be linked so: They aren't allowed to work in conflict (i.e. you can't set cooling lower than heating) They can work in tandem to heat the room with both mechanisms without setting them separatly. I can't see any concept…
-
Help needed with buying the right setup
Hello Everyone! I have a 2-floor house where I am planning to install a Tado system with a new Bosch condense boiler, but I am a bit lost in terms of how the system works. On the ground floor we have underfloor heating - my plan is to control this entire floor with a single termostat, which I should be able to so as per my…
-
Myson mep 1c
Just tried today to connect up my Tado system. Internet bridge & termostat was easy, but then to the controller We have a gas system boiler with hot water tank. But the old controller is a Myson MEP 1c. There is no support for this controller & I’m not sure if the cowboy builders have done a bodge here. Anyone got…
-
Is there anyway I can get the Smart AC Control/app to remember last used settings?
Hey - been using 3x Smart AC Controls for the past month and generally happy with them. In my use case I only use manual control - which meant I had to create a schedule with one 24 hour block set to off (bit strange i can't just 'disable' scheduling tbh - but can live with that). BUT what is mildly annoying is that manual…
-
Tado with Buderus logomatic 2107?
Newbie in the forum, please be gentle 😀 I own an old Buderus 2107 running an oil fired boiler. One external (outside of building) temperature device using simple setback control. NO internal temperature control device. Will the TADO unit work with my system, or do I need some other interface from Buderus to allow the TADO…
-
Hot water control is missing from my App
I just replaced a Honeywell ST9100C with a Tado Extension Kit. All installed as per the excellent instructions. However I can not see a hot water timer function on my App. The Honeywell used to control my hot water times independent of the central heating. Have I done something wrong? Many thanks for any advice.
-
Lost communication
Hi all, Suddenly last night I lost connection to all my valves except 1 of them and can see the internet bridge is connected. What is going on?
-
Can devices be produced in colours other than white?
I am very interested in the tado° devices, but don't necessarily want them to be white. For example, the wall in our living room where the thermostat will be placed is dark green, so a white device will clash. Can we have options for other colours, say black and grey, to begin with. There is no change to hardware or…
-
What happens when HomeKit adjusts temperature when TRV (or all rooms) OFF
For the summer, Tado is set to 'All rooms off', so we just have hot water being controlled. However, what then happens if I set/run a HomeKit Scene that adjusts the temperature of a room? I would hope that if any TRV the Scene adjusts is actually OFF, nothing will happen, but somehow I don't trust Tado, nor Apple to have…
-
Tado multifloor with floor heating and radiators, what would be the best product setup?
Hi Tado Community, I moving to a house with 3 floors, where the ground floor has floor heating, controlled by a thermostat in the ground floor, while the other 2 floors have independent radiators, where the water comes from district heating, so no boiler at the house. What would be the best setup in this scenario? Of…