-
Merged: Configuring Tado X - multiple smart home platforms
This discussion has been merged.
-
Merged: Option to set thermostat valve always open
This discussion has been merged.
-
Smart AC Control to turn off AC unit when desired temperature is reached
Could it be possible to add a feature to the Smart AC Control that would allow for AC unit to turn off automatically when the desired temperature is reached, and then, when the Smart AC control detects that the temperature has raised 0.5-1 degrees over, to turn on the AC unit again? At the present moment, using the Smart…
-
Possible workaround for multi-home users on Samsung Android devices
Hi folks There's been quite a few posts on the multi-home support issue which got me thinking that surely it's possible to run multiple copies of an app on your phone. I have a Samsung Galaxy S9 and it appears that the Samsung Secure Folder feature will allow you to have a separate copy of the Tado app with different…
-
Tado valves and Beretta meteo mix 24 csi boiler
Good evening everyone, I'm Mario from Italy. In my home I have 8 radiators, 6 on the ground floor and two in the basement (tavern + laundry), all managed by a thermostat located in the room on the ground floor. Now I need to better regulate the temperature in the basement and I was thinking of adding thermostatic valves on…
-
I can’t find a set up for a Baxi platinum compact combi 36 boiler, can I use a Tado thermostat
I want to use Tado with my current system but there’s no set up for a Baci Platinum Compact Combi 36 boiler. I have a wired system.
-
Has Crowdstrike affected Tado?
The tado app on my phone suddenly stopped recognising my tado sensor. It is shown as "Offline". Is this related to the Crowd strike/Microsoft problem? Do I need to do anything, or will it be resolved by tado themselves? Thanks.
-
Always show temperature on Tado ac
Have an option to set Tado ac to always show the current room temperature on display.
-
intelligent program depending on the outside temperature for AC and boiler with termistat
hi, I don't understand why it's not implemented. A intelligent program would be based on the outside temperature to determine whether the air conditioning or heating intelligent program should be activated. For example if outside temperature >= 25, activate the intelligent air conditioner program, if temperature below 18…
-
Merged: Weekly motions
This discussion has been merged.
-
How do I get my old Home removed?
I moved out of a flat with a tado, adding the new owner to the home and getting them to remove me. I've bought new tado devices for my new place, but it seems we missed the step where they take total ownership of the home. As such I can't create a new Home for my new devices. The chat agent suggested contacting them but…
-
Connessione da rete mobile 4G/5G
Ciao, chiedo se sia possibile poter modificare il firmware/software del Tado in modo da farlo funzionare anche da rete mobile, visto che funziona solo da rete Wi-Fi.
-
Quality issues
The display on my Smart Thermostat has failed after only 3 years. As its out of warranty Tado won't replace it. Having to replace one of the main components of the system every 3 years will make the system very expensive. Extremely disappointed by the Customer Service received from Tado and the quality of their hardware,…
-
internet goes down
I turned the hot water on last night then my internet went down I could not turn it off I tried to turn it off on main controller but after a couple of minutes it turned itself back on I ended up turning main power off to boiler does any one a way I can control system when internet goes down
-
boiler cycling alot in Opentherm
hi, i have the radiator and room thermostats in 5 rooms, and only my living room is set to call the heat, the other radiator thermostats are not assigned a zone controller. i've had a viessmann vitodens 050 installed 2 years ago running in opentherm. although it regulates the heat well and doesn't overshoot alot at all and…
-
External thermometer for tado.
Do taxi make an external thermometer that links in wth the tado app? If they do, I can't find one. It would be very useful if I could remotely monitor the outside temperature as well as the inside temp.
-
Are these two models same for wireless starter kit?
V3P-SK-WTS01WRP01/B01-TC-UK-00 V3P-SK-WTS01WRP01/B01STAND-AZ-UK-00 second one has a stand but I am more interested to know if first one is EU version or not.
-
Add boiler control to starter kit installation
I installed a starter kit (WiFi room controller, bridge, and four TRVs) last year, which is working just fine. Now I'd like to add direct boiler control, our Grant Vortex seems to be suitable. It has a very old digital controller ("TimeGuard") on it to control the heating and hot water circuits and it's this I want to…
-
Dual Tado Wired Thermostats - Keep switching heating on
I have replaced two Danfoss TPOne-B thermostats with wired thermostats one thermostat is for the ground floor the other the first floor. Initially when they were installed the heating for both floors kept turning on even when they were set to off, I had to remove them to switch the heating off. Having done some research…
-
Change language
Hallo can some one help me and explain how I can change the language in the App
-
I bought a second system for another home how can i add it to app
Hi I have just bought 2 tado systems not realizing that you can only have one account on the app , is there any upgrade coming to sort this issue
-
Internet Bridge v1 v v3+
Hi, I have the original internet bridge along with extension kit and smart thermostat and more recently added smart radiator thermostats. I'm looking at some of the offers for starter kits - the main attraction is getting more radiator stats but bigger thought is, do I need a new bridge ? What do I get with a newer bridge…
-
Moved: [Feature Request] Informeer gebruikers bij ontkoppelen bridge over risico verliezen abonneme…
This discussion has been moved.
-
TRVs only, upgrade to whole system later?
Good morning, I'm sure this must have been covered before, but I couldn't find it in the search (probably not using the right terms) - we have a Vitodens 100W (living in the UK), which I can control via the ViCare app. I'm basically looking into a way how I can control the individual rooms in our 2bedroom house…
-
Radio signal information
Show information about signal strength between each component and the bridge, so as to have an idea of where to put the bridge to improve the connection with the other components.
-
Tado Internet Bridge wont connect
Just changed WiFi to Virgin (hub 5) the the Tado internet bridge will not connect despite several resets. The pairing light flashes on the bridge but nothing else happens. It worked so easily on the old router as well 😥 Any suggestions?
-
1hr boost
It would be very helpful to be able to set a timer for boosting a heating zone. Some time I would like to have the heating on either upstairs or downstairs outside the scheduled times. More often than not I set it manually but I always forget to turn it off. Since I have underfloor heating the temperature raises very…
-
Plastic sensor too prominent
I have 8 x Tado valves working well in my house. Unfortunately it seems that an additional vale I wanted to add has a problem, with the plastic sensor sitting too prominently and not being inside its recess. Any ideas how to fix this? I’ve tried to push it back and gently rotate the sensor but it doesn’t seem to want to…
-
Merged: End of support for IFTTT
This discussion has been merged.
-
Tado Wireless receiver offline
Hi Folks, We are away from home on a 3 week vacation. I tried checking my tado status using the App and the wireless receiver is appearing offline. All the instructions suggest to repair but it won't be possible as we are away. All my other devices like cameras are online so it is not Internet issue. Any suggestions on how…