-
How can I stop my boiler firing all the time?
4 bed house Two zones: underfloor heating wired thermostat; regular radiators wireless thermostat Got this set up working well with the zones independent of each other. Happy! Condenser boiler. Decided to add some TRVs to control some rooms on Monday. And I’m less happy! 1x study only used in the day so set at low temp in…
-
Schedule not always starting heating - Tado support says my system is problem
Hi, I contacted support because in the last 10 days or so, the Tado schedule is not triggering the boiler and I need to start the heating manually. Tado support have said absolutely no problems on their side. They are asking me to do lots of resetting, moving the bridge and even changing the router, is it worth me doing…
-
Some radiators not turning off
Afternoon everyone. I’ve fitted Tado valves to most of my radiators but have had problems with three of them (8 are working fine). When I fit the Tado valves, they never manage to fully turn off the radiators. I’ve tried changing the temperature adjustment for them to see if I could fool the valve into closing completely,…
-
My app is saying my heating is offline and I'm away on holiday at the moment what can I do?
Have uninstalled the app and re installed but no joy. Anyone got any ideas? Am worried my pipes will freeze!
-
Get the status of the relay
I have 3 wired thermostats connected with Home Assistant (both clouyd and local by HomeKit). I would like to know the status of the thermostat relay. That is, if the thermostat is asking my stove to turn it on or off. In the app this information is absent (I don't understand why) and there are 3 waves that give an idea of…
-
Adding UFH
Hello all, Currently my heating (combi boiler) is controlled by a TADO using a wireless receiver, wireless sensor and internet bridge etc. I want to introduce two zone heating by installing two, two port values, i assume that i can operate one of these values using the equipment i currently have, can i purchase another…
-
Can I add the Tado Wireless Smart Thermostat to my existing Tado Smart Radiator set-up
I paired the new wireless thermostat to my existing Tado internet bridge OK, installed the wireless receiver which I presume paired to the wireless thermostat as the pairing indicator on it was lit. But the new thermostat won't control the boiler. It will switch on but not off. Am I supposed to use the internet bridge…
-
Hardware Button for Home/Away Mode
Hello fellow tado users, We are using tado in a shared space and wanted to have a physical button to toggle home/away, because it wasn't feasible to always invite everyone into the app. So here's our solution: 1) Get an Apple Homepod Mini (or Apple TV 4th gen) 2) Install Homebridge (https://homebridge.io/) on a device that…
-
setting the timer from abroad
Hello. I’m going abroad for a few weeks where I will be 12 hours ahead of the UK. For the first week there will be a contractor working in my home, so I want to keep the heating as set. After this period I want to reduce both heating and hot water. Question: will the changes I wish to make relate to the UK clock or will…
-
Boiler is constantly on
Hi guys! set up my Tado to my boiler yesterday but the controller isn't turning the heating off when I tell it to through the app. I believe I have wired it all correctly. I have a Vaillant Ecotec Pro 28 boiler and I have wired it up as such: Brown cable (live) in node 3 of boiler and L node on Tado Grey cable (not sure…
-
Tado to replace Danfoss in a system boiler set up
Hi there I hope all is well with you & you had a great weekend! I am hoping you can help me establish whether a Tado system would integrate well in to my home. I’ve tried to research as much as I can, so apologies for the long email, but hopefully this has all the information to help us work out if this would be a good fit…
-
Wireless Temperature Sensor - totally unresponsive.
Evening folks, our Wireless Temperature Sensor has worked fine for almost two years and when required has prompted for fresh batteries. This morning we woke to a cold living room (The Wireless Temperature Sensor is used in there) and the app told me it was unresponsive. My first thought was to replace the batteries (I also…
-
Early Start not working
I have used Early Start for years but recently noticed that it is not working. If I select Early Start for 8.00am, during cold weather the heating would come on earlier so that it was at temperature by 8.00am. Now even when Early Start is selected, the heating will.only Start at 8.00am even when the outside temperature is…
-
Smart TRV and temperature reading
Hi Community As a newbie to Tado Smart TRVs I have a fairly basic question where I can't find a definitive answer - what temperature does the Smart TRV measure ? If I set a TRV to say, 20C I note that the 'real time' temp as seen in the app, from the TRV, can go above that especially when the heating system first comes on.…
-
How do I get one radiator just to come on with a TRV?
Hi all, I recently purchased a TRV for our bedroom in the hope I could turn on a single radiator before bed. We have a log burner downstairs and rarely use the central heating. However despite fitting it easily, whenever I go to turn the upstairs radiator on, the whole house system turns on as well. Is there a way for me…
-
Smart schedule not working but booster working.
Had this a couple of times now where my smart schedule doesn’t turn the boiler on (despite it saying on my phone that it has), but if I then go to boost the heating the boiler immediately turns on. Not sure what’s going on as the smart schedule has worked fine for ages and ages…any help would be great as it’s driving me…
-
Tado TRV - Water droplets in battery area
Hi, I have Tado TRV's on all but one rad in the house, the other morning went into the front room to find it at around 25deg. Checked what the Tado app and valve was indicating, which was OFF, as per my schedule. Took the Tado off the rad to discover water droplets on it and in the battery box. Dried it all out and put it…
-
New installation
Good evening all I am a novice here I want to upgrade to a "smart heating system" I currently have an Ideal Combi boiler A honeywell wired thermostat. My knowledge here is zero. Can I have smart radiator thermostats on say the 2 upstairs bedrooms, but not the bathroom (small in size) And no smart radiator valves downstairs…
-
Thermostat Overswing
I have recently installed a wired thermostat to work in relay mode, but it doesn't switch off at the set temperature, but 1º above. Not a huge issue, but it's not working as described, so I've had to set the threshold lower. Is there a way to make the thermostat switch at the temperature it was set at? I've looked at the…
-
2 weekly schedule
My kids are at home In a 2 weekly cycle. So week 1 they are in on wed, thurs, Friday and week 2 on wed, thurs,Friday,sat,sun etc. All smart thermostat systems are based on weekly schedules.so for the even weeks I am ok but for the uneven weeks I need to switch off manually. Could tado become the first with 2 weekly…
-
Cannot find config for my room therostat
Hi I have bought the tado wired smart thermostat V3. The idea was to replace the room thermostat for my Ariterm Biomatic +20 boiler. The factory thermostat can set the desired temperature, measure the room temperature, display outdoor temperature and display alarms from the boiler. I'ts the same thermostat that is used for…
-
How long does it take for tado support to respond?
I need help with changing my boiler flow temperature and submitted it to tado about 3 days ago but I still haven't had a response. How long does it usually take?
-
Design question - underfloor heating - 2 zones
Hi all! I have underfloor heating in my main apartment. Gas boiler sends hot water to 2 water manifolds each having a circulatory pump. The first manifold has 6 water circuits and the second manifold has two water circuits. What would be the best way to control heat delivery and temperature to both zones independently…
-
Local Access and Control of Tado Heating System
In the event of an internet outage, of which there could be many reasons, my Tado heating system which uses smart TRVs, becomes entirely unusable and the valves stay in the position set when the outage occurs. In my case, the valves were off/frost protection and will remain so until my internet is restored, which due to…
-
Room displays as always manual controlled (history graph)
Hi, so I have a few rooms (with individual TRVs), central heating, and all works fine. All rooms have a schedule and away mode. That works fine too. And then there is the bathroom. The history graph shows the pointy finger icon (manual mode I think) 24/7. There is no away mode, no switch to night mode, nothing. However, as…
-
Tado turns on radiators in boiler but not hot water
Hi all, i have recently installed the tado with extension kit in the vitodens 100 b1kc, unfortunately, it seems unable to change the hotwater settings. I can't get hot water out of the faucets. When disconnecting the tado and regulates itself, it seems to work all fine. It is wired up correctly over opentherm. Any ideas?
-
Heating goes off automatically
Hello, I observed in the last 3 days the heating it's turning off sporadically even If I did not set it so. Seems it follows the smart schedule which I am not able to delete it. I just wanna set it manually and turn off it manually as well. I tried to delete the block from smart schedule but it goes to 18 degree but it's…
-
How to re configure main thermostat when replacing a heater
Hello. I'm planning to change my heater soon. What is the procedure to follow to reconfigure Tado to control a new heater?
-
Smart Thermostat replacing a Danfoss TP7001m timer/thermostat
Hi can i switch over a Danfoss TP7001m timer/thermostat to a tado Smart Thermostat, I removed my TP7001 to replace it with the Tado controller and the wiring looks different, I expect i need to change the back plate but don't know how to wire it up as the wiring labels are different, Thanks Michael
-
New Set up Help - Heating always on.
Hi All, Just wondering if I could get some advice please, as I only have the evenings to try and solve this due to work. Basically I live in a flat and believe I have a S Plan set up, due to having two valves in the utility. I bought the V3 wireless kit from Screwfix to have a wireless thermostat. I used to have a wired in…