-
Energy IQ
Hi. I am trying to get my head around the Energy IQ section of the app. I have inputted several meter readings for November and December and they are as m3. I have set the tariff from November as kWh. However the graph does not generate a figures that match (or close) with my OVO app. For example, in November, OVO says I…
-
Thermostat seems dead after battery change
Hi After changing the batteries in my thermostat - it seems to be dead.. pressing the button for 3 seconds does nothing, holding for 10 seconds, still nothing... I’m using brand new AAA Duracell batteries. I’ve also try to remove the stat from my Tado account and reinstall - but now the bridge doesn’t seem to be able to…
-
2 heating zones
I have a combi boiler system with 2 separate heating zones. At present each zone has a wireless thermostat controlling a 2 port zone valve. Is it possible to control each zone valve with a separate Tado thermostat. The house is divided into 2 dwellings with one boiler. I want to have access to both zones via the app but…
-
Installation
Just got the tado wiles starter kit and gon to install but thr wiring diagram do not match to what I have tried to contact someone but by phone only a message and my get back home to the app for on line support and the message is we may get back to you in two days have sent email to install team and no response this is…
-
Bad experience with tado installation
So, we purchased around 10 months ago an all singing and dancing V3 Tado system to control our heating as recommended by our installer. We knew we were planning on putting in an underfloor system at a later date but was assured it was future proofed and underfloor works with it. Skip forward 10 months and underfloor is…
-
UK: tado v3+ Vaillant EcoTEC+ System Boiler eBus
Hello all. I recently installed a tado v3+ wireless starter kit (UK version) plus 10x smart TRVs. The wireless receiver is connected to a Vaillant EcoTEC+ 428 System (not combi) boiler. Everything is working well, but the system is of course just using on/off relay control. I would like to now get tado controlled…
-
PROBLEM TO INSTALL
Good Morning, i have a problem to install the termistatic valve tado v3+ on my heater (look in photo). The adapter inside the box doesn't work. Thanks Matteo Spadari from Italy
-
Help
can any one make head or tail of this
-
Internet bridge offline every few days
My Tado internet bridge keeps losing router connection every few days. A reboot of the bridge brings it back on. Everything else wired to the same switch is working fine. Is there any way I can see why it's disconnecting? I've not made any changes on my home network in a long while but this has been happening for just the…
-
No Hot Water in Energy IQ or Climate Report
As the title suggests, I’ve got no tracking of hot water control at all in my Tado App. I have newly installed Tado X, everything works as it should. HW on a daily schedule which kicks in as and when it should. Radiators all equipped with smart stats and working as they should. I’ve added my gas unit data and history to…
-
Dress Plate for the V3 + Wireless Receiver
Hi My new V3+ Receiver occupies a much smaller footprint when mounted in the recess hole that housed the old Controller . Anybody got any ideas on how to dress up cosmetically to avoid tiling , filling & painting etc . In brief I need a dress plate , similar to the dress plate that's available for the wired smart…
-
How do I disable geofencing for hot water using Tado X?
I have a system boiler which means I have a hot water tank. The water needs to be heated periodically to ensure Legionnaires disease does not grow in the tank. When Tado X is in Away mode the hot water can only be set to on or off, there is no schedule. I am about to go away for a month in the middle of winter and in Away…
-
Genius Hub
I currently have the Genius Hub system but due to the fact they have never implemented Apple HomeKit support and few items now failing was looking at moving over to Tado X would the receiver be a straight swap with the wiring Thanks
-
Old boiler and confusing system any ideas on why we have 4 going out and what we need to do help
any help would be appreciated
-
Which Tado X starter kit do I need?
I am getting very confused as to which Tado X starter kit I need. I am in the UK, and this is my first smart thermostat. The boiler is a Worcester 24ri. It's a vented tank system with a hot water tank. I have a wired thermostat in my hallway. I have a Sunvic 207 xl controller wired into the boiler. I need to be able to…
-
How do multiple TRVs work?
Existing system: Roomstat and timeswitch with two switching periods per day, manual TRVs. Proposed Tado system: To have a smart TRV in each room each with its own schedule. What happens when the schedule for one TRV says 'off', does it change its setting to 0 degrees? If not does another TRV saying 'on' turn on the boiler…
-
Temperatura acqua sanitaria
Buongiorno a tutti,ma è normale che la temperatura dell'acqua sanitaria si possa regolare solo dall'app o dal termostato intelligente e non più dalla caldaia stessa? Mi spiego; io ho impostato la tempratura dell'acqua sanitaria a 45° tramite app ma se voglio variarla dal display della caldaia ( Ferroli Maxima ) la stesa…
-
Tado not turning on boiler
Please can anyone help? We have a Worcester greenstar 12RI and have purchased the tado wireless smart thermostat starter kit. Internet bridge connected, thermostat and receiver all set up but no boiler firing up when heating or hot water mode selected? This has replaced a lifestyle LP241 and British gas T4 rf wireless…
-
Missing Features Tado X Early Start - Profiles Scheduling
I would like to know if early start can be available again for Tado x? Is there no way to store programming profiles? So that the user can quickly choose from his stored profiles instead of having to change everything manually and having to manually write down the profiles? If I am on vacation and want a different profile…
-
Hi, is it normal to have to tap the tado control to get the relays to let go?
Love the product and it's been a steep learning curve. I eventually found a temporary work around for a fault but I don't think it's a long term solution. Twice now the central heating pump and boiler has remained switched on even when the controller lights indicate that it should be off. Regardless of any reboot or reset…
-
Who to wire to Installing Tado Starter V3+ kit with Worcester Bosch Greenstar 30 si?
Who to wire to Installing Tado Starter V3+ kit wired with Worcester Bosch Greenstar 30 from Drayton thermostat? Do I put it on a digital ( N with - and L with +) and any additional wires I need to isolate? Thank you in advance for your help.
-
Lost the case screw at the bottom
I lost the tiny case screw from under the Tado. Anyone know how to get a replacement? Or what size it is? it’s not essential, but it’s annoying that it disappeared!
-
Tado X Firmware
What is the latest Tado X Firmware for all the Tado X devices? Is there a web page that lists all the firmware, and what changes were between versions?
-
How to force thermostat to obey schedule after turning off manual control?
This is schedule set for thermostat controlling UFH: Sometimes I set temperature to 21C (seen as manually - Alexa automation). Then, after some time, Tado goes back to schedule (turns off manual control), but does it faultyly - "thinking" that different temperature is scheduled than it actually is: Do you know what to do?
-
Desperate for an answer on TRV calling for heat
I reached out to support but frankly the response is beyond poor and taking over a day. I have 5 TRV's upstairs and downstairs I have 5 wired Thermostats. When the TRV's upstairs need heat, no call to the boiler is made and they stay cold unless one of the thermostats downstairs is calling for heat. I ready through the…
-
Veissman Vitodens 100-W wb1c and Tado v3+ not communicating
Hi, we've had the Tado v3+ installed for about a month and no matter what we do, the Tado will not control the boiler. We've disconnected the previous thermostat which was the Veissman Vitotrol RF wireless. That's now dead and buried. Various " experts" have suggested several wiring configurations and things to try but…
-
Are the Danfoss RA-C2 Compatible with TADO X?
Hi, Are these compatible with TADO X Valves? https://www.screwfix.com/p/danfoss-ras-c-white-angled-thermostatic-trv-lockshield-15mm-x-1-2-/49331 I can't get a firm answer from the compatibility and a lot of the valves are now superseded
-
Unable to add devices to app through Matter
Just received my Tado Wireless Receiver X + Wireless Temperature Sensor + 8 RTV's. Installing the Wireless Receiver worked fine (it seems). But none of the other products seem to be able to connect through Matter with me. Ipv6 is enabled on the router, but it always stops at "generating Matter credentials". Multiple…
-
I want advice about what Tado parts I need and how to wire them to a 2 port 'S' plan system
I am trying to get variable temperature control and timing from a Tado controller. Present system: Thorn EMI Olympic Boiler 38/50B (old but I am told simple) Grasslin/Towerchron QE2 electronic 7 day timer (With a back plate) Satchwell wired hall thermostat The system has 2 motorised valves, hot water cylinder with a…
-
Issues and solution for setting up tado with 3rd party integrations
So I've had my fair share with setting up tado and wanted to share my problems and solutions. Note that I have a Unifi dream machine as router, complicating things a bit more (as it turns out). The core problem I had were: Unable to connect the Tado X bridge; Device linking button missing; Unable to link to third party…