-
Why is the boiler suddenly pumping out heat 3 or 4 degrees above the set temperature?
My basic system is about 6 years old and is only for the heating. Just switched the boiler on for the winter season, but the boiler is heating way above the target temperature. Simple wall mounted thermostat. Installed by D&G and always worked well to date. Thanks for any advice
-
Heating constantly calling for heat
Hi, just installed a V3+ kit and second thermostat for the upstairs replacing a Danfoss 9000 downstairs and 5000 upstairs plus the TADO downstairs thermostat/temp controller replaced a little matchbox sized Danfoss temp reading device, the two wires from this I just put in the block connectors provided by TADO. Upstairs…
-
Don't know if change the thermostat can help.
My home is using a conventional boiler which provide central heating as well as connecting to a water tank for hot water. A honeywell programmer is next to the water tank cupboard, then the wireless receiver. The Honeywell wireless thermostat is in the lounge. The bathroom have a towel rail (full flow without TRV, and all…
-
Install Issues
Hi, New user here. ive set up and installed the below and wondering and hoping someone can guide me in the correct path. i have 3 Zones in my House which control oil-based heating system. Zone 1 Downstairs Rads Zone 2 Upstairs Rads Zone 3 Downstairs Living /Dining & Kitchen Area underfloor Heating (Water Based) i recently…
-
I cant get my system to work via the schedule only through manually turning each room on.
I have rebooted the Internet Bridge, I have taken all the radiator valves off and change the batteries and put them on again. They paired successfully. I have rebooted the thermostat. Now I don’t know what to do any suggestions?
-
Does the thermostat shut the valve when no rads are calling for heat?
My thermostat is in the same room as a radiator. If I have a smart thermostat on the radiator and it is set at a lower temperature than the wireless smart thermostat will the thermostat shut off the valve or still be calling for heat even though the radiator has shut off?
-
Limitation température à 25
Pourquoi limiter la température à 25 degrés ? Pb hardware ou firmware?
-
How come all rooms are keeping a constant temperature but one room is overheating ???
How come all rooms are keeping a constant temperature but one room is overheating???
-
Wireless thermostat and radiator valves
I have installed a wireless thermostat and two radiator valves. I have the same set up up stairs and on my app the upstairs shows as main bedroom in one box and controls the valves fine. I have now tried to do the same in my lounge but my app shows lounge in 3 boxes instead of only one box. Not sure what I’ve done wrong…
-
Linking to air source heat pump
Do we need to replace the transmitter on our heat pump with the Tado one or can the smart thermostat link to the existing one?
-
Setup Tado smart ac control v3+ without original IR remote?
Hi, I'm thinking of buying a Tado smart ac control v3+ for a duct system mounted in the ceiling. The brand is Haier, currently controlled via a wired remote on the wall. The wired remote has an IR-eye but I dont have any IR-remote. From what I've read it seems like I need an IR remote to configure the Tado? Will I not be…
-
Compatability with Vaillant Combi Gas Boiler
I have a Vaillant ecoTEC plus combi boiler with a vSMART wireless controller, I'm considering installing a tado system with at least 6 rad controllers. My question is ; is the tado system compatable with my Vaillant set-up The tado compatibility chart suggests it is, see attachment, but before I commit to £350 worth of kit…
-
Replacing existing wired controlling and programmable thermostat
I have a Worcester Greenstar 24i system boiler connected to a Honeywell ST2400C controller which is connected to a Honeywell CM907 programmable thermostat. I do not know if the current wiring to the programmer etc is via a wiring centre as the wiring from the boiler to the controller is boxed away and access extremely…
-
App on saying heating but no warmth in rads
Hello! First post, I tried searching for this but couldn't find anything so apologies in case this is a frequently answered question! I have the Tado in the room I am in set to heat to 20c, it says it's heating (and is shaded on the little chart) but the temp is not going up and the radiator is cold. It's currently 13.4c.…
-
Hur kan man undvika att riktningen på luftflödet ändras på IVT aero vid start.
How can you avoid the direction of the air flow changing on the IVT aero when starting and stopping.
-
Extension kit is completely dead
My Wireless Extension bridge, or device, the one connected to the heating system and the electrical supply, is now dead. I have tested both the cable from the plug with a measuring instrument and it shows 240V on the poles of the device, also there is about 80V coming from the heating system on the heating system relay…
-
Heating rooms individually without having to turn on main thermostat
Hi, Just need a bit of help please, just installed the tado kit and trvs yesterday, all works fine but I'm struggling with one thing. Can I just slide up in the app let's say for bedroom 1 and then the boiler gets triggered and turns on? Right now I am having to do the following: Turn up the main thermostat and then…
-
Maximum Boiler Temperature Fail
Set my open therm maximum boiler temperature to 60 degrees a two days ago and checked the boiler flow and return temperatures which, at a point, were 59 and 32 degrees. Just checked this morning and they were 80 and 65. How can this be?
-
Why does one particular radiator come on whichever room I try to heat?
Hi, I have a Wireless Thermostat and two radiator thermostats in my dining room. I also have radiator thermostats in our three bedrooms, the bathroom and the living room. In the evening, I just want to heat my children's bedrooms, as we have a woodburner downstairs. Whilst I can heat the two bedrooms, one of the radiators…
-
Deleting account on the community.tado.com site
How can i completely delete my account on the community.tado.com site thanks beforehand
-
Heating on, but no indication why......
Hi everyone I had a situation a few weeks ago where my Wireless Receiver lost connection with the internet bridge and kept the heating on until it re-established a connection. This happened overnight so I only noticed when I woke up in the night and realised all the radiators were on full blast at 2am! I reported this to…
-
changes not displaying on grouped TRVs
Hi, Ive just recently installed my Tado system and so far everything has been great. One curiosity however is Ive noticed that the grouped trvs in one room arent displaying changes unless physically tuned. I have 3 trvs in 3 rooms and then another 3 fir radiators in our open plan living room. When changing values on the…
-
What are the Basic Line TRV limitations
Hi, I have several Tado Smart TRVs installed but Im curious what the difference is with the Basic Line of TRVS. There are a couple more radiators that I wouldnt mind installing TRVs on, but perhaps I could get away with using these cheaper version for less important rooms (bathrooms for example). Im assuming they are…
-
Help with what to buy!
Hi All, Before I go ahead and purchase I want to be clear on the right kit. I have a system boiler in the kitchen with a hot water tank upstairs in an airing cupboard. 1 x Bathroom - On/ TRV 1 x Bathroom - On/ No TRV 4 x bedrooms - On/ TRV Living Room - On/ TRV Kitchen - Off / No TRV Hallway - On/ No TRV Current setup -…
-
OpenTherm Water Temperature
Hi there, today I have bought new boiler (Baxi Duo-tec Compact E 24) which supports OpenTherm and is connected by wire to Tado Smart Thermostat. Hot water control for washing hands is regulated by temperature setted up in Tado App and cannot be regulated in boiler - which is correct. Hot water going to radiators also…
-
Tado Smart Radiator Thermostat and Heatmiser Thermostat
In my home on the first floor passage I have a Heatmiser Thermostat which controls the heating in all bedrooms on the first floor. If I were to fit Tado Smart Radiator Thermostat's on all the radiators is it possible to control when the actual boiler turns on by replacing the existing Heatmiser Thermostat with a wired Tado…
-
How to remove old wireless stat. Alpha boiler with Alpha easy stat
I have an Alpha Etec 28 boiler with existing wireless Alpha thermostat. I have hardwired in the Tado, but In the instructions it did not mention how I remove the old stat from the boiler. The old one is interfering with the Tado, and I need to remove it for the Tado to work. Does anyone know how? Thanks very much.
-
Tado control algorithm
Hi, Imagine the following case with a Vaillant ecotec plus and Tado thermostat connected via Ebus. The Tado ebus is demanding the CV heater for a CV water temperature of 58°C. The CV heater has a parameter that limits the CV water temperature to 45°C. By doing this I am influencing the timing/parameters of the tado…
-
Is my thermostat working?
Hi, I have 4 smart rad valves, internet bridge, wireless room thermostat and wireless controller running a Worcester heat slave oil boiler. The system also has another 5 radiators with ordinary TRV’s. The smart rad valves work satisfactorily but the thermostat is a bit of a mystery. I had assumed that when the smart rad…
-
Hot water Boost
Is there a way to boost the hot water for a short time at a period when the schedule would normally have the water off.