-
Merged: Can't control none of my devices!
This discussion has been merged.
-
Boiler not switching off
I have had my system fitted for over 2 years (Controller, wireless thermostat and 10 valves). Up to now it has worked flawlessly. However over the last week or so the boiler will not shut down at the end of the day even though the app says every thing is off. The only way I can stop it is to switch it off at the mains. I…
-
Tado° X upgrade discount - will this be available in the UK?
I got the promotional email offering a 50% discount for existing customers to upgrade to Tadoº X. However because I'm based in the UK as much as I would like to I can't take advantage of it. Does anyone know if a similar discount will be available once Tadoº X is launched in the UK?
-
Support more than 10 rooms and 25 devices
Please can you add support for more than 25 devices and only 10 rooms, with a 5 bedroom house, with ensuites with a number of downstairs rooms, 25 devices is not enough when you want radiator TRVs and smart thermostats in each room. also limiting the total rooms to 10 does not work in this environment either. Please,…
-
IFTTT replacement - customised boost temperature and duration
I used to use IFTTT to boost my heating to 21 or 22 degrees for 1-2 hours depending on the setting. It was WAY more useful than just 25 degrees for 30 minutes. Tado removed the integration, but could features like this be integrated into the app then? It seems like an easy change, we can already boost, it just needs to…
-
I do not know which thermostatic pressure valve install before plug some TADO
Hello, I have a question before buying some tado devices I have a single-tube installation with bypass on each radiator, so closing one does not affect the following (photo attached). The issue is that I have noticed that there are many valve models, I need a reversible one because in some radiators the valve goes on the…
-
Does the Wired Smart Thermostat X support TPI
I am thinking of replacing the existing wires Danfoss TP5000 with tado so I can link it to Home Assistant. Does the Wired Smart Thermostat X support Time Proportional and Integral (TPI) so it limits overshoots and undershoots on meeting the required temperature and can also control the cycling of the boiler? (ErP Class IV)…
-
Night mode
Hi, I think it would be useful to have a "night mode" with a setting in temperature. With the other modes, away and home can be set as a scene recognised by alexa, Google home. So we can stop heating the apartment or some rooms when we go to sleep with third-part routines/automations.
-
energy efficiency with Tado X relay on/off vs Tado V3+ modulating/opentherm
I purchased a Tado X wired thermostat along with 12 Tado X radiator valves, assuming they would be compatible with my system in the same way as the V3+ version. However, I discovered that my Ariston boiler uses BridgeNet instead of Opentherm, and the X version isn’t compatible with my boiler’s digital interface. As a…
-
Logic Combi c30
I have a Logic Combi c30 boiler, It has a Center Wireless 7 DayProgrammable Thermostat which has a Receiver Box. Am I correct in thinking all I have to do is remove the Center Receiver Box and wire in the Tado Wireless Receiver? So just 4 wires? Is it that simple?
-
Dual Zone confusion
Hi, I've been happily using tado for many years but have moved to a new build house and have gotten lost trying to upgrade the installed system to tado. I have a system boiler (with no apparent controller), a Mixergy HW tank and 2 wired thermostats controlling a dual zone system (Upstairs and down). Seemed simple enough…
-
Moved into a house with Tado
Hi everyone, we’ve just moved into a property where the previous owner had the tado system. It’s been assigned to us and I can control the heating from the app. However we have no hot water, the ap says hot water is on but the shower is cold! How do we change this? I’m not tech savvy so it’s been a challenge already!
-
Myson Touch TS EU to Tado
Today I went and bought 5 TRVs and a Wired starter kit but seems I may have made an error so looking for some help. Currently our house has 4 Myson Touch room thermostats. We have 3 downstairs which control our underfloor heating for 3 different zones: kitchen, living room and hallway & bathroom. Upstairs is one Myson…
-
V3+ no longer starting boiler on schedule
V3+ no longer starting boiler on schedule (a month old v3+) since the 1hr time change in the UK, the schedule is no longer working, the panel is not firing the boiler. After some testing yesterday i enabled pairing on the dongle and set the time to come on for a bit in the evening which worked, but this morning it didn't…
-
Just checking my logic
hi all. Have just fitted the v3 kit and some smart valves. I haven’t fitted to all rads but living room and all bedrooms. Can someone sense check how I think it works and offer suggestion. So as mentioned a number of rads, kitchen/dinner 2 bathrooms and the hall and landing remain on mechanical trv. The 4 smart rooms are…
-
Load compensation UK
Hello, I have a straightforward question regarding load compensation and boiler compatibility. After having to return Drayton Wiser thermostat because my boiler cannot support OpenTherm (Boiler is Vaillant ecoTec pro 28 and if I add OpenTherm to it it will void the warranty) I'm considering Tado. The most important thing…
-
Underfloor heating zone valves with heat pump
So first of all, I'm based in The Netherlands, probably worth mentioning since wiring and heating systems might be slightly different. Anyway, we've recently moved to a new house with a heat pump system and underfloor heating throughout the house. I've checked and the Vaillant heat pump we have is compatible with the Tado…
-
What is this?
I've never seen this before. I did a search, but I have no idea really how to word the search as…….I don't know what it is! Its the black area, with a hand/finger? What does it mean please?
-
tado UK Shop - How Long to Ship?
I understand the current vogue for doing all communication via chat, but it's frustrating that the UK Shop seems to have no dedicated support to answer a simple question like "Where's my order?" Even worse, the email address that tado has supplied to ShopPay to deal with any order questions is: noreply@tado.com. If the…
-
Are you satisfied with how Tado controls UFH?
Hi fellow Tado users. I've been using Task for few weeks. I have typical terrace with UFH on ground floor and radiators on 1st and 2nd floor. UFH and boiler are controlled by wired thermostats (boiler with opentherm) and radiators by SRTs. I'm not getting expected results with UFH. I'm curious do you have similar problems…
-
Why does the system ignore the set temperatures?
Having fitted my system back in June, I am now just beginning to use the system in anger and to fine-tune it to my house. The system is as follows: Two Zones each controlled by a Wired Thermostat. 8 x TRVs comprising 6 x Smart version, and 2 x Basic. All but one TRV is bound to the Zone Controllers to call for heat, the…
-
Living Room Overheating Due to Tado Radiator Knobs in Bedrooms
Hello, I recently installed a Tado wired thermostat in the living room and four radiator knobs in each of the bedrooms to control the temperature independently. However, I’ve noticed an issue: whenever a radiator knob signals the boiler to heat a bedroom, the living room also starts heating—even when its temperature is…
-
Internet Bridge and Ubiquiti Unifi Dream Machine
Since a few days I keep having issues with the Tado internet bridge not connecting to the Cloud, the LED keeps blinking. The bridge is connected to my Ubiquiti Unifi Dream Machine and the configuration has not changed over the last years, it used to work seamlessly. Anyone having the same experience or issues?
-
Tado X migration from V3+ with Worcester Bosch EMS
I am looking at the Tado X and wondering if EMS or EMS+ is supported on Tado X as I can only seem to see reference to OpenTherm. I also have 1 room where I have two Radiators with Smart Stats and a central stat controlling the two rads. I am guessing this is still possible? Also if anyone has made this migration and…
-
TRVs micro adjusting a lot - how to stop?
Has anyone else experienced Tado TRVs micro adjusting and have a solution to stop it, because it's noisy and slightly annoying in my bedroom. For me it only happens during the heat-up phase. I bought them about three weeks ago, maybe they are calibrating or something, or maybe it's a permanent thing. I tried to have the…
-
How to read the tado graph
I've been monitoring the tado graphs for each room for quite some time now. They are great for seeing how the temperature fluctuates throughout the day, but there is no "key" to explain the shadings below the line. Take a look at the graph below ... There are 4 shades of grey - but what do they represent? My assumptions…
-
Firmware confusion
Can someone definitively tell me the latest firmware numbers please?? Smart TRVs , Smart thermostats, temp sensors etc ?? Also how regularly do Tado offer new releases ??
-
Tado TRV when boiler on frost protection
Might seem like a daft question but have installed Tado v3 thermostat and TRVs on all radiators in a holiday home, during the winter it’s empty and we always put the central heating (condensing) boiler on frost protection. With the trv in frost protection when the temperature drops below 5 degrees will that turn the boiler…
-
Worcester Bosch Greenstar 8000 and EMS
Please can you configure the Tado wired unit to work with the Worcester Bosch Greenstar 8000 and EMS
-
Stabilizing heat demand pattern for constant set temperature
I live in Scandinavia and often work from home, so I have a consistent heating demand throughout the day. When looking at the temperature/heating graph view, it is clear that the heating demand (and temperature) follows a cyclic pattern with a period of 45min on average. I'd love to post an image but I don't think this…