-
Ability to use Wireless
Tado needs the ability to use multiple wireless temperature thermostats to control different rooms independently.
-
My boiler is nit triggered by Tado thermostat
Today I installed the Tado wire thermostat. It doesn’t triger my boiler
-
Heating status for On/Off mode
I would prefer to see the heating status as a simple on/off symbol rather than the three waves. I have a heating source that does not support opentherm and thereby only works in on/off mode. Why I would need this: This would be useful to really check if my heatpump is working properly: I currently do not always know for…
-
Radiators + Water-based underfloor heating
Hi, I have 3 floors at home. Floor 1: 1 Wired Smart Thermostat + 2 Smart Radiator Thermostats Floor 2: 2 Smart Radiator Thermostats Floor 3: Smart Thermostat wired to the pump controlling the Water-based underfloor heating. I used to connect all the Smart Radiator Thermostats to the Wired Smart Thermostat in Floor 1 (Zone…
-
Towel rail valve fitting.
I would like to put a thermostatic radiator valve in the bathroom towel rail. I tried an existing tado valve I have with the standard fitting. The metallic ring screws in, but the plastic bit is a bit loose. When I try to fit in the valve itself, it does not lock in as the pin sits too tall. I tried the various valve…
-
Increase Zone Controller Max Rooms
I ran into the limit of 10 rooms on one Zone Controller and I need it set to 12 rooms. I am sure this has also affected other Tado users retrofitting a complete house.
-
Wiring for baxi 800 with LP722
Hi, I have a baxi 800 boiler with a Drayton LP722 controller and a Honeywell T6360B thermostat. I followed the instructions inside to tado app to replace the LP722 controller and everything seems to start up ok but my heating does not seem to work at all. I'm now not sure if I should've followed the instructions for LP722…
-
Wired up as required but have no central heating. Grant vortex pro 26e.wiring diagram in manual is n
Wiring in manual is numbered
-
Controller setting wrong
I'm not getting any hot water, after a year or two of having everything working OK. We have Yplan gravity system with hot water cylinder. We changed the mechanical valve head but still no joy. Tested the controller and it shows as yellow, combi. When I change it to green for Yplan it flashes and settles on green but still…
-
Wired thermostat v3 and radiator thermostats in one room not supported?
I have installed a wired smart thermostat and radiator thermostats on the radiators in the main room. I have radiator thermostats in other rooms as well as I want to program with a different temperature/schedule I noticed that the radiators in the main room are closed off when the temperature is achieved, as expected. But…
-
How customisable are tado’s manual controls?
Hello all. I’m considering setting up my whole house with tado - smart radiator valves included. I’m yet to find a clear answer on something and wonder if someone can help. Is it possible to control the whole system manually with one ‘command’? Whether that’s a button in the app or an Alexa voice command. Probably easiest…
-
Worcester Bosh 24/28i Greenstar with Comfort RF 1 wireless thermostat
I've bought a Tado from Ovo, but now realise my control unit is listed as 'not compatible'. Is there any way to fix this? The unit is a Worce.ster Bosh 24/28i Greenstar with Comfort RF 1 wireless thermostat. My plumber has tried installing it, but we can't get the heating to come on. Why is this so hard, there only seem to…
-
Postponed buying 8 Tado thermostats, looking for other solution!
Postponed my idea to install 8 tado thermostats, because it appears that, nevertheless many people ask for this integration, still nothing happens. If it comes to brands that cannot be integrated with Smartthings, there are a lot more cheaper ones on the market I figured...
-
Trying to modulate a Worcester greenstar 440cdi ErP
Hi, I have recently had a new boiler fitted and for various reasons it had be a greenstar 440. As I understand it Tado is able to modulate Worcester boilers through HT-BUS / EMS-BUS. The problem I’ve got is that the person who fitted my boiler has connected in Relay mode as that’s how the previous one was done. I cannot…
-
Thermostat Not Following Programming Schedule
Last night the thermostat called for heating, switching on the boiler and heating circuit. It did this although the App and Smart Schedule had the Thermostat programmed to OFF. The App showed the thermostat status as OFF. Even so the thermostat ignored the programming and called for heating. Any ideas why?
-
Tado HW function not working!
Got it working now by reconnecting the devices and re-installing the app.
-
Smart AC Installation
I have bought a Smart AC control but the installation lacks any useful information. How can I connect it to Wifi? What is the HomeKit? Ok i figured it out I have to download 'Home' application which is never mentioned at anywhere at Tado site / installation process. Do I need 'Home' to be installed on my phone to be able…
-
Air Comfort suggestions
Hello, We're supposed to make energy savings with Tadoº, but it's quite inappropriate to get a suggestion to turn the heating on when a room is just below 20ºC. The World Health Organisation recommends a room temperature of around 18°C in Winter, and The Energy Saving Trust advises setting the thermostat to around 18-21°C,…
-
Measuring device
Hi All, Just a very quick question. Does setting a measuring device in a group disable other devices within that same group from calling for heat? I can't see a definitive answer in the community and have seen previous discussions mention that this function has to be set up by tado support, so just wanted clarification.…
-
Underfloor heating
I have my heating set up with a Tado system but the underfloor heating is on a separate thermostat.. how can I integrate it into the Tado app ?
-
Grant Vortex Boiler with Hot Water Tank - Tado Wireless EU Version
Hi there, I bought Wireless EU version for OpenTherm feature but now I am wondering if it will work, if so how it should be wired. We have Grant VOrtex oil boiler and hot water tank. Thanks for info, recommendations.
-
Vaillant Home Combi 35-A and VRT 350 (wired) with Tado wired Thermostats - NO heating control
Morning all Hoping someone can help em out. I have been heatless ( now 2 days and not had a response from Tado just yet - waiting on the phone call back) I purchased the Tado wired v3+ starter kit and additional add on thermostat I followed the instructions which was simple, the app shows no faults anywhere and the hot…
-
[Released] Rechargeable batteries in Smart Radiator Thermostats VA02 hardware revision
tado EDIT 10.02.2021: We have released support for Eneloop 1900 NiMh rechargeable batteries for the VA02 hardware revision of the Smart Radiator Thermostats. - Why only Eneloop 1900 ? Because other rechargeable batteries might be too thick to fit into the battery compartiment because they are thicker than Alkaline…
-
Boiler demand indication on main page
Hi, it would be great to have the three waves or just a simple red dot by the temperature of each room in the main page. Or at least a way to see at glance if any of the room is forcing the boiler to run. Thanks
-
Energy IQ not generating consumption.
Hi I've installed 4 wired thermostats to the 4 underfloor heating zones and 1 wired thermostat to the upstairs where I have radiators. I've also installed 6x tado TRVs and all working fine. Only issue I have is the energy IQ does not load any consumption data even after 24hrs, I've put my tariff in and meter readings but…
-
Fine tune temperature on devices
There used to be a way of adding or subtracting from the temperature shown by Tado devices to improve accuracy. I can no longer find the setting. Does anyone have any ideas?
-
New Installation Not Working Quite Right
I've just installed the 'Tado V3+ (Black Edition) Wireless Heating & Hot Water Smart Thermostat Starter Kit', replacing the existing British Gas MODEL UP2 Controller/Programmer, and Honeywell DT90E (wired) room Thermostat, on a Baxi 600 boiler feeding a Y plan system. The above pic shows the wiring (which has been…
-
Simple improvement to use Tado both for heating and cooling
More and more users are moving to heath pumps both for heating and cooling, by having the same pump satisfy both needs by pumping fluid under the pavement. Unfortunately, so far, Tado only has a minimum temperature in his controller, so it is only possible to employ it for heating. A simple improvement would entail adding…
-
Update thermostat settings after adding a heatpump to my system
Hi, I'm about to install a hybrid heatpump to my system. This will require an update to the settings of my Tado Smart Thermostat and Smart Radiator buttons - I've been reading that Tado Support can do this for you, but how on earth am I supposed to contact them? Is there a link for creating a support ticket? Many thanks,…
-
Changing contact information
I have just sold my house, which has a Tado set-up. I have successfully added the new owner to the home but I cannot change the contact information to his. When I enter the email or phone number the error message says the email address is associated with another home. They have only registered with this home. We can’t work…