-
Random times throughout the day the heating light on the reciever switches on.
Im new to tado, my builder has set up the wireless receiver to my combi builber and I set up the bridge/ thermostat and 8 STV around the house. When it works its great, but at the moment random times throughout the day the light on the heater appears on the receiver which basically turns the boiler off. I don’t know what…
-
Can smart radiator valves override fixed wireless thermostat.
Starter kits include wireless thermostat. If thermostat is installed, say in hallway where required temp may be 18 deg C generally throughout the heat on period, then any smart rad valves in sitting room or kitchen could be calling for 20 deg C at some time during that period, during evening or breakfast. There appears to…
-
Unadjustable and restrictive geofencing and resulting account disabling
My wife has a house about 300m from mine which she retreats to for work and other reasons about twice a week. However if she has Tado account for her house it prevents her from having an account in my house. I undestand that the geo fencing is the issue but as my car sat name knows where I am within 10m (guaranteed about…
-
Salus BTR230
Hi guys! I just moved into a new apartment and wanted to install my wired tado thermostat to control my floor heating. Unfortunately I'm struggling with the wiring. My old thermostat is a Salus BTR230. Does anyone know how to replace it with my tado thermostat?
-
Radiator thermostats
Will it cost me more money having individual Tado stats on my 4 bedroom radiators set to 18 degrees in the night, where each radiator will call for heat at seperate times and therefore my boiler would be running a lot of the time. Or would it be cheaper to use normal stats and use my boiler to call for heat say for 2-3…
-
Replacing TPone M thermostats with tado
I currently have 2x TPone M thermostats - one upstairs and one downstairs (separate zones). The wiring configurations are identical: https://pasteboard.co/aehy36hg5FU5.jpg https://pasteboard.co/mYY2S0Ahj40V.jpg The hot water control function is turned off on both thermostats. I just want to double check that if I buy 1…
-
Tado keeps resetting to 5C overnight
My Tado keeps setting the temperature to 5C overnight. This is used for a disabled parent after a stroke and she cannot get up to adjust so would really like to know how I can fix this. Could it beow battery, even though I have no warning, or internet connection dropping out?
-
Symbol on schedule bar?
On my schedule bar chart I have what appears to be a teardrop with a line through it. What does it mean?
-
Elektro Fussbodenheizung
Wie kann ich in der Grafik heizen erkennen wann die Heizung wirklich eingeschaltet ist? Ich betreibe die Fussbodenheizung mit dem Tado Zimmerthermostaht
-
Using TRV for underfloor heating?
Hello! I currently have a setup with a bridge and 5 TRVs. However, we have moved into a new house that has 0 radiators, but 3 zones of underfloor heating (water based) - heated by a air-to-water heat exchanger. Currently the underfloor heating and the heat exchanger does not communicate in any way. I would very much like…
-
Can I replace Honeywell BDR91 receiver with a Tado wired thermostat?
Hello, I purchased the Tado V3+ wired thermostat with the hope I could use it as replacement of my Honeywell BRD91 receiver which simply turns the heating on and off. Below the current setup of the BRD91 and how I tried to connect the Tado wired thermostat with no luck. What did I do wrong?
-
Combi Boiler or not so that TADO setup is most efficient
Being in germany the setups apparently are different - im not sure the rules on whether they have to have condensing boilers or not. I have Buderus (Bosch) Logamax U154-24K which i think is an older (but how old i dont know) combi boiler. The clues as to whether its condensing or not dont appear to be there. I have no PVC…
-
SmartThings integration
Costco have just announced a great deal, starter kit v3+ plus 4 smart TRVs. Am I going to pass on this offer because Tado won’t integrate with SmartThings?
-
How to fit a Wireless Receiver in the place of an old Extension Kit?
My Extension Kit developed a fault (hot water was getting stuck on), and Tado have provided me with a discounted "Wireless Receiver" to replace it (as this is the new version of the Extension Kit). Installing the original Extension Kit was so easy, I simply popped off my old programmer, slotted the Extension Kit onto the…
-
Heating only comes on with hot water
Hi Over recent weeks I’d noticed that the boiler (ideal logicmax h24) was sometimes not firing up even when tado was calling for heat. Problem seemed to be inconsistent but was generally resolved by turning the boiler off and on again at the mains. Have realised however that this problem never occurs if the boiler is also…
-
Boost - Wireless Receiver
Hi Just a couple of questions. If internet was to be down for a day or a few hours how do I boost from the Wireless Receiver? My undernstanding is by pressing the On button it will switch it on until press again? Another question if we press Boost on the app is there a way to know how much is left on the boost? I assume…
-
Why does it heat my house while I'm away?
I have Geofencing enabled. My schedule is set to start heating up on weekdays at 10am to 18.5c. My away setting is set to 10c. If I'm not home or if I leave home it does register me as being away, but it just heats up anyway. Strange thing is today it got to 16c and then held it there all day. It shows on the graph it was…
-
Boiler active and scheduling.
Hi all, I've just installed Tado with my combi boiler and added 8 SRVs to the radiators that previously had TRVs. however 3 still need valves fitting. Living Room - 2 SRVs + Room Thermostat Dining Room - 1 SRV + 1 Towel radiator (No TRV) Bedrooms, Hallway - 5 SRVs 2 Bathrooms - Towel Radiators (No TRV) I noticed last night…
-
Checking Tado is Right for us: Smart TRVs, UFH Control etc.
Hello, Currently in our house we have a Nest Learning Thermostat Third Generation for all the radiators in the house. For the two large family rooms downstairs we have replaced these radiators with water underfloor heating. This UFH runs from a single manifold in the garage and the two UFH rooms can be controlled and…
-
Local Weather programming
Idea local weather application on the software app. so that is heating is on inside and the temperature is hot/cold outside system can be aligned switch on/off cost and time saving for user of the Tado product this option would not need additional hardware only software and weather data.
-
My camera will not record my connection details
My camera does not record my registration details
-
Boiler wont turn off
I've had the Tado a couple of weeks now and everything has been going fine. At 9pm yesterday the boiler kicked in and hasn't stopped since. I've turned everything off, I've tried resetting the boiler but nothing is working. I'm stumped. Anyone got any ideas?
-
Tado V3+ with wireless connection to Baxi Combi
Hi. New to all this. Just purchased a new build house and want to install Tado wireless V3+. I’ve followed install instructions via the app but when I turn the main power back on the boiler has no power. Found out the fuse has blown. Changed the fuse and the same thing happened again. Can anyone point me in the right…
-
UK Opentherm and wireless V3 kit
Hi, Ive started fitting the starter kit V3 along with wireless smart radiator TRVs. I have one customer who is asking why an opentherm connection has not been used when he has so say 'Smart' controls. His boiler is no longer modulating with weather compensation. Am I missing something in the setup?? Thanks
-
TRV Offline - Steps to Improve Connection
I just had my broadband router relocated and immediately the furthest TRV went offline, though my WiFi is OK in most of the house. Since it is the radiator that is complaining is it my broadband router or the Tado Internet Bridge I need to get closer to the radiator? If it's the Tado Internet Bridge does it have to connect…
-
Tado V3+ with Smart TRV's used with Tado V2 - are they compatible?
I am looking to upgrade my Tado V2 extension kit to the V3+ version, but I have a load of smart TRV's that I use with my current V2 extension kit. Would these TRV's be compatible with V3+ or do I need to buy new ones? Thanks in advance.
-
How long SHOULD a flow temp take to come up?
im gojng to seem thick again here. My combi boiler (without hot water tank) is rated to 24Ki have about 9 rads most are smaller but three bigs ones in three rooms with high ceilings that I know take about 90 mins to come up 2 degrees to temperature. My boiler flow temp after setback starts off at about 30 deg and in 15…
-
Radiator Thermostats
I have a house that has Tado TRV on all the radiators and thermostats in each of the major rooms to allow better temperature control. However recently I have found that the app shows rooms are heating despite temperatures being higher than requested. Initially, I thought it was an error and checked the radiator and it was…
-
Why is my system coming on?
In the last week the control unit has decided to turn around midnight even though no programmes are active. This sets the pump running but the boiler doesn’t fire because nothing has been requested but the smart thermostat.
-
Connections
Can anyone tell me if the wireless receiver connection HW NO should only have 240v when there is demand from the software?? Tech support won't answer this simple question...