-
Data Analytics
Is there a way I can download my Tado activity data so I can do my own data analytics?
-
We have gone away and taken our iPads but tado has not recognised we are away.
There used to be picture with a circumference around the house and it would show if we were home or away or within a certain distance of home, that us no longer on the ap. Has the away feature been discontinued? We haven’t been away for so long it could have been stopped months ago. I still have remote access to tado and…
-
Blink Display TRV not working
Hello, Out of my 9 TRVs , 2 of them (They are all on firmware 79.1) will not blink while I click on the "blink display" in app or web. They seem to work ok just seem unresponsive when I click on Blink Display or Child lock. Does anyone else experienced this? Thanks
-
Why is there a 10 zone limit for extention kit when it says that 25 TRVs can be supported?
Tado somehow has a 10 room limit, so the 11th TRV onwards just becomes a dumb TRV. This limit seems un-necessary and the 25 TRV claim also seems misleading. I bought 16 TRVs and now 6 are sitting stupid. Have to start calling my friends whom I had recommended Tado just before realizing this limit :(. This is a deal breaker!
-
Help! 2 Combi Boilers - What do I need?
Hi I've recently moved to a mid victorian townhouse that has a Ravenheat combi boiler providing heat and hot water to the basement and ground floor, and another Ravenheat combi boiler that is providing heat and hot water to the 1st and 2nd floors. I've been looking at smart thermostats yo try and get better control over…
-
Wireless Receiver + HW, LED status lamp
I wonder if someone could clarify the indications from the wireless status indicator on the receiver. I recently had some difficulty with the latter when it stopped responding to commands from the app. I noticed the status lamp was pulsing slowly and despite a power down / up it continued to do this. The Manual for…
-
Internet peculiar issue
This has happened 4 times in the last ten days. Android phone Tado app shows Blue screen with a cross "Internet lost". The Bridge has all lights solid - including Internet connection. Only way I can get the app to work and control the system is: Get the bridge in pairing mode via the app; Get Smart thermostat into pairing…
-
Pegler Terrier bs2767-10
Hi there, I'm hoping for some help installing the Tado TRV onto radiators with very old Pelger Terrier valves. I've tried a number of different fittings without luck. These valves are based on manual turning, rather than pressure, and so I suspect won't be compatible at all, but would love to hear from anyone who has had…
-
TADO connecté chaudière vieesmann VITOLADENS 300
Bonjour, J'ai acheté le kit de connexion TADO chaudière avec vannes thermostatiques ; je souhaite installer le système TADO sur une chaudière Viessmann ( constructeur recommandant TADO ) .La référence de ma chaudière est : VITOLADENS 300 avec VITOCELL 100 Je recherche le tuto pour réaliser le montage électrique afin de me…
-
Two radiators in one room doesn't work well
I just got started with Tado. I have two radiators in one room. When the temperature is near the target, only one raditor is heating. The other is completely cold. While this may technically fullfill the requirements, it is far from ideal since it will heat up the room unevenly. I should note that when the room temperature…
-
Duplicate devices in the Google Home app
Hi, Been using tado for a while and haven't had any issues with the app or system, however ever since connecting my tado account to Google Home our devices show up twice in the Google Home app. This was fine at first as it was only one thermostat but recently we've added a smart radiator thermostat and plan on adding more…
-
WB Greenstar 8000 System Boiler, Tado Bus Connection
Has anyone got a Tado to talk to the bus of a WB Greenstar 8000 life system boiler? I’m replacing my heating system and have done a bunch of reading. To achieve load modulation of the system boiler I believe I have to purchase the internal diverter system and plumb individual HW and CH flow and return piping to the boiler.…
-
Configuration with UFH Giacomini
Hi, i need help to install TADO thermostats, i have water UFH from Giacomini in a new house, and i buy five TADO Thermostats. So the Giacomini has two different eletrovalves 230V R473 and R473M. So I have five R473M eletrovalves one to each principal zone that i want to controll with TADO thermostat, also i have several…
-
Can I buy a new part (the box which goes in to router ?
The box that goes into the router is broken so I have no remote access. Can I buy a new one somewhere ?
-
Switch on/off a circuit valve directly with the Extension kit
I have a new Bosch boiler controlled by two Tado smart thermostat and an Extension kit. The ext kit is wired to the boiler and to a relay. When the ext kit switches on the boiler, the relay will be switched on as well. The relay switch on two external Grundfos valve. One is controlling the underfloor heating circuit and…
-
Extension kit in pairing mode but app showing all devices are connected
My extension kit is blinking indicating that it is in pairing mode yet all the devices are showing connected. Might this explain why the radiators that are on the non smart trvs are always on?
-
Can each TRV in a zone enable window open mode?
Hi. I have a TRV near my front door in my hall. My smart thermostat is in the hall but just round the corner, out of direct draught. When the door is opened, the zone doesn't enter window open mode, despite the fact that i'm sure the TRV would have detected it. Does anyone know how this works? I just want open window mode…
-
Tado Jumper Pin
Hi, I need to purchase a new Tado “Extension Kit” jumper pin. This is a little light brown pin that fits inside the Tado extension kit, set at position one or two. Does anyone know where I can buy one..?
-
Adding Radiator Valves messes system
Have installed the Tado controller on our standard boiler (hot water and central heating) with the wireless thermostat to control heat (located where old wired thermo was) System was fine until I started adding Tado Radiator Valves. Now everything is oddly behaved ... including heating coming on at night and radiators…
-
Identifying this Valve (DN15)
Hello, can anyone identify this valve? Thank you very much!
-
J'ai acheté un kit de démarrage+ extension. le bridge est bien installé (wifi et prise électrique).
Pour un studio situé en bas dans ma maison, , je veux pouvoir commander et gérer la t° (donc 1 chaudière au gaz pour toute la maison,1 sonde à l'étage.(pas dans le studio). J'ai acheté un kit de démarrage+ extension. Le bridge est bien installé (wifi et prise électrique)? PROGRAMMATION FONCTIONNE QUE SUR 2 VANNES. Mais…
-
Can I adjust water temperature remotely on a combi boiler
I want to be able to adjust the water temp remotely form the app on my vaillant combi boiler. I’m sure there is a way to do it with bus control . I want to be able to run the water at different temps. Ie have it colder when small children are in the house,
-
My Vaillant Ecotec Plus does not get activated with my newbought Tado V3+
First I connected my Tado on the wall with the 2 wires in + en - Everything connected and paired with my Wifi. I opened my Vaillant and did the connection with 'bus' and the configuration. But the heating isn't working. Then I tries on the 24V = RT connection and did the other configuration. But still nothing happens.…
-
Manual change
Hi. My manual change settings font seem to work. On just one of my rooms. I have 2 radiator tado thermostats. And 1 wireless thermostat all under the same room. The wireless thermostat controls the temperature in that room. If I manually change the temp it does not revert back to the schedule. I have the manual change set…
-
Problems with tado system in new house
My parents have just bought a house with a tado system. So far, the heating isn't coming on with the timer, the hot water is scalding hot and is also hot when the hot water should be off, and I'm unable to change the contact details to manage the system from the previous owner's details. He doesn't seem to have had much of…
-
Can the radiator thermostats be fitted to all radiators?
Hello, I am having a new boiler installed. and I have a wireless Tado system. I have a gas combi boiler and 5 radiators. My plumber wants to know if it is okay for each radiator to have a Tado radiator thermostat attached or does one radiator need to be left without one so the system has somewhere to run off to. Also, I…
-
Child lock and Alexa.
If i have a TRV child locked will Alexa overide the lock. Hope it wont to stop teen sons from messing with the heating in their rooms. Just would like to know before TRVs arrive.
-
Heating on at full blast, even with heating on Smart Thermostat set to OFF
Hi There, I have a Smart Thermostat being used as a Wireless Temperature sensor, and an extension kit for Hot Water control. No smart TRV's installed as yet. Last weekend, i noticed that the house was 25 degrees when i got home, even though i have the schedule set up as 20.5 degrees max. I did a reset of my boiler…
-
Heat pump working even heating request temperature is reached
Hello everyone, smart schedule time from 19:30 to 21:30 - heating request is set to 23.5; smart schedule time from 21:30 to 22:30 - heating request is set to 22.5; At 21:46 hour, inside temperature was already over heating request temperature (22.5), it has reached 23.3 but the heat pump was still working at medium power…
-
Self Installing - Must I purchase the Tado thermostat & Receiver? Or internet bridge & Tado TRV
hi I currently have the Worcester Bosch Greenstar 28i Junior Gas Condensing Boiler. this has the DT10RF programmer thermostat. The boiler has the Digistat DT10RF receiver programmer installed on the control fascia of the boiler. The following link takes you to the pdf manual of these exact two items (the digistat…