-
Installing/Wiring
Hi, I have brought a Tado smart thermostat and currently attempting to install it. I currently have a Worcester Greenstar i boiler connected to a Honeywell BDR91 which wirelessly links to a Honeywell EHE0200361. (All images attached) I have entered this information into the step by step guide on the tado website, however…
-
Trim plate for extension kit
Hello. Does Tado sell a trim plate for the extension kit? I can see there is one for the smart thermostat but couldn’t find one for the extension kit. My Tado system is setup but the extension kit needs tidying up a little and a trim plate would do this nicely with little effort.
-
Tado Radiator Thermostat Firmware 62.2
For some reason just one of my Radiator Thermostats has a version number of 62.2. This thermostat does not react to any commands from the App or from the manual dial. It simply also reacts to the Blink Display COmmand and blinks "Hi". But it will not react to any temperature changes or even show the temperature. In the app…
-
Installation of thermostat
Installing the thermostat to replace a Drayton digistat 3 which currently has two cables running into it one marked as “C” and the other as “ON” I’m presuming the cable marked as “C” would connect to common on the tado and the cable marked as “ON” will connect into the “NO” on tado
-
Tado swiching off both thermostats,
section of smart schedule showing an inverted teardrop symbol with a strikethrough on app. Both thermostats switch the system to OFF. Any help appreciated, thanks.
-
Smart Schedule
My house is equipped with floor heating. Using the smart schedule, the heating starts way too late, anybody an idea how to correct this?
-
How can I change the heating system option when setting up
I went through the set up online but initially have selected the wrong heating set up (it’s a new build and was unsure of what was actually going on in the house). I now can’t seem to change the set up and am worried I’ve now wasted my money on the Tado system. Can anyone help me with this as it’s really quite frustrating
-
How can I change the heating system option when setting up
I went through the set up online but initially have selected the wrong heating set up (it’s a new build and was unsure of what was actually going on in the house). I now can’t seem to change the set up and am worried I’ve now wasted my money on the Tado system. Can anyone help me with this as it’s really quite frustrating
-
Can I I time geofence to specific people?
We are three roomies living together and each of us have access and each our own rooms Is it possible for TADO to automatically turn down heat when a person attached to a room leaves the house and ventures outside the zone?
-
Energy savings report
How often is it released? Is it part of the TADO subscription? Is it well calibrated from the start or will it take some months before it learns about my home?
-
How to split 3 "dummy zones" into real rooms?
I am asking your help as tado support has not been able to give me a clarifying answer. I have 3 zones in the house: where I live, where I work and an archive. Each zone, but the latest, is composed by different rooms and has a motorised valve to control zone heating manifold. My current configuration is one tado…
-
TRV's not behaving properly
Hi, Got an issue I think. I have the tado TRV's on all of my rads. I have smart scheduling, so as an example at 1.30am last night the schedule settings would have been: Spare room - TRV set to 18c, actual room temp 21c Child room 1 - TRV set to 20c, actual room temp 20c Child room 2 - TRV set to 20c, actual room temp 20c…
-
Tado Bridge Has Very Poor Range?
I have the Apple Home enabled bridge, working well with 6 Smart TRVs... when I try to add a 7th, in a room a little further away - its's a maximum of 20ft from the bridge - it will not connect. This leaves me with 4 Smart TRVs that I cannot configure. Moving the bridge closer, obvious thought, stops 2 of the working 6 TRVs…
-
Underfloor heating - can I control multiple zones with 1 thermostat?
Hi everyone! Apologies if that has been answered already... We are refurbishing the entire ground floor and putting underfloor heating. There will be a total of 7 zones (each zone is a room) I was wondering if with Tado I could group some of the zones and allocate to a specific thermostat? For example, I want Thermostat 1…
-
Re: Home mode "on demand"
-
Devices won’t show up on HomeKit
Hello all, i have two smart radiators that are connected to my bridge. I can see all the devices and configure them using the tado app. Everything looks fine except that they won’t show on my iPhone or iPad home app. I’m trying to add the bridge on my home app but it keeps searching forever and will never find it. any…
-
Is possible to use TRV only in some rooms
Dear all, I am not a TADO customer, at least for now because I am in the process of refurbishing my new flat. But I am strongly considering to buy TADO smart meter. My main concern, justified by several posts on this brilliant forum, is the level of noise produced by TRVs. My daughter is a very bad sleeper and at the…
-
Manual TRV use over-rides smart scheduliing
Hello, I have set up some of my rooms with 1hour internal slots for the entire 24hr period. My understanding on the system was that if I enter the room and manually changed the TRV to heat that room (as a guest in the house, so does not have the app for remote access control), it would only do so for the remainiing time of…
-
In Away mode does Tado turn of radiators completely or only to the minimum level of 5 degrees?
What if I'm on holiday for a week, what's the best setting in order to save energy with the away setting?
-
GeoFencing using app
Hi, I have noticed that the Geo fencing only seems to stop any scheduled heating and that if I have just turned on a radiator using the app to say 21C (not scheduled) when I leave the home and the app switches to away mode the scheduled heating radiators show as green so not heating but any that we’re turned on to heat up…
-
Whole House Control
Not sure if this is possible but... I currently have: 1 x Extension Kit 1 x Internet Bridge 1 x Smart Thermostat 10 x TRVs I'm thinking about getting TRVs for the remaining 4 Rads so ALL the Rads in the house have Tado TRVs. Was thinking, is there a way to configure Tado to turn the heating on through the Extension kit if…
-
Heating just gone "no remote access"
Been using Tado for a couple of months now. Have recently swapped out the Internet Bridge via support, as the original one kept dropping off with the cloud LED flashing. The new one has been working fine for a few days, but now both the smart thermostat and extension have gone "no remote access" despite the Internet Bridge…
-
In Away mode does Tado turn of radiators completely or only to the minimum level of 5 degrees?
What if I'm on holiday for a week, what's the best setting in order to save energy with the away setting?
-
To get customised installation instructions, **please reply to this email with the following informa
Did anyone experience this and how long before a reply is received?
-
Teste Intelligenti Tado° - offset di temperatura dinamico o doppio (calorifero acceso spento)
-
Moving thermostat head unit to bedroom
Just installed 4 new valves in my living room and kitchen, which seem to be working to keep my living room warmer than the kitchen. I have another box of 4 and the plan was to install them in the bedrooms, but hearing them in action and reading the comments here I'm hesitant to install in my sleeping space. Currently the…
-
No tab to control my hot water
I have followed the instructions precisely for installing the extension kit and the room thermostat but I cannot control my hot water only the heating which works fine.
-
can i buy a thermostat v 3 in uk and use it in denmark with out problem ??
can i buy a thermostat v 3 in uk and use it in denmark with out problem ?? Kenneth
-
Smart Thermostat in Bedroom -Audible Click
Happy ;New Year all! Currently considering Tado. I have a two zone system with a a wired thermostat in the lounge and bedroom. I also have a separate timer for the boiler. Both thermostats have a an audible click when switching on and off. Not a problem in the lounge but the one in the bedroom is a bit annoying, is there a…
-
V3/v3+ app
I bought a v3 starter kit (bridge and two trvs) which I've installed so I presume I have the v3 app, how do I check? I've just bought a smart thermostat and extension kit but these are v3+. Will it automatically upgrade my app or can I add them to my existing v3 setup?