-
Hot Water heating randomly coming on
Firstly may i say that Tado support must have the patience of a saint with me. My hot water is set to two time blocks per day using smart schedule, It always has been. Also my Away settings withing the Hot Water Smart Schedule is also set to on. And once again it always has been. Anyway over the past few months random…
-
Combination of AC control and smart thermostat
I got bot tado devices but installed in different heights. Of course, I could equal them, but as we talk about smart devices here my question: Combined in one room the AC control and the smart thermostat, can the measured temperature of one of these devices be used by the other one? Of course the ground floor is colder by…
-
installers
Hi guys i am wanting to install the Tado system in my house, but some radiator valves are old and need replacing first from what i can gather to the thermo ones. My question is, after trolling the site, is their a list of tado installers or accredited installers in Netherlands?
-
How does V3+ take into account solar production for hot tap water?
Hi, I would like to understand how Tado takes into account solar heating? Does the hot tap water function on the V3+ extension take account of anticipated solar radiation before it starts the gas boiler?
-
Cannot get this working
Have installed the extension kit in place of Honeywell ST6400C programmable controller and have bridged a relay using TADO instructions. Heating and water set to off but heating running and app says off but heating keeps on going.. If I remove the bridge that was used only for heating then neither the hot water or heating…
-
Anyone using Tado in Korea?
if there is anyone using tado in korea reply please~ hoonerpark@gmail.com
-
No hot water
Hi I got an extension kit recently - the heating is working but the hot water doesn’t. I have a horstmann channel plus h37XL controller. Is there a certain way to wire this up. I’ve 3 thermostats - ground floor and then 2 on the 1st 2nd floor that are controlled by a separate zone - then the hot water. The heating is…
-
Ho To set Tado when are you away from home for a while
Hi All, hope you can help me with this. My configuration is: extension kit, wireless smart thermostat and some smart radiators. I would like to stay away from home for a while and I would prefer to switch off the Wi-Fi connection as well. What I need to do in order that tado maintain the temperature of the rooms at a…
-
Does anyone know how to get the Heating on?
Okay, so that sounded like a really basic question. But We have the Tado extention kit installed, the app is saying the heating is on but the Radiators are cold. The Extension kit is pulsing, so there is a link, Really hope someone knows what todo, as it is colder and colder. Thanks Watergoodheatingbad
-
Tado causing boiler error with hot water
Ever since we installed tado our hot water periodically stops with an error on our boiler and we need to reset to get working
-
Smart Thermostat and extension box.
Hi, if I go to 'settings' -> rooms and devices and show the thermostat, it shows the serial numeber, firmware version, it also shows connected and battery life as 'good', then the room (Living Room) but under this is a bold title 'installation instructions' yet it was installed nearly a year ago and is working ok. The…
-
J
-
Compatibility Question
Hi All, I currently have a standard S Plan system with Hot water control & thermostat, and looking at the tado system as I like the apple home compatibility. My Boiler is a Fusion comet 24k Electric boiler running a S Plan system. https://www.electric-heatingcompany.co.uk/electric-boilers/3-phase/ I have a standard timer…
-
Cloud LED on Internet Bridge is flashing forever
Hi, I have purchased a starter kit and some Smart Radiator Thermostats. When I connect the Internet Bridge to my router, the Power and Router LEDs has solid lights, but the Cloud LED keeps flashing. I have verified that I can connect to my.tado.com from the same network and the same ethernet port in the router. I have also…
-
UFH multiple zones and zone valve question
Hi, I have a (perhaps overegged) configuration of the following: 5 x TRVs on upstairs radiators 4 x TRVs on downstairs radiators 3 x seperate UFH zones controlled by manifold, each with a smart thermostat 1 more smart thermostat (intending to use this to control 'general' house temperature as per traditional thermostat)…
-
Bosh Gaz 6000 W ( WBN 6000-24 CR N ) should I buy Tado
I have an Bosh Gaz 6000 W ( WBN 6000-24 CR N ) boiler that says it accepts OpenTherm and EMS bus. I am located in Eastern Europe and the Bosh heating system is produced in Russia. I am wondering if I can buy and use Tado with it. I plan to buy a Wireless Smart Thermostat Starter Kit V3+, wondering I I still have to buy the…
-
Ekstern sensor.
Hi. Can the smart thermostat be used as a replacement for the sensor in the smart radiator thermostat?
-
Warm water control has been removed
I've had a Tado system on my Junkers boiler for over 5 year and I was (with the exeptionof the new App) up to now very happy with the entire system, I've been a beta-tester too. I went on hoilday 4 weeks ago and turned off my warm water via the app, apon my return I could no longer find a warm water setting on the app or…
-
smart ac control and smart radiator thermostat in same room?
Hi! I'd need a control setup where I can automatically switch between cooling and heating in a room based on preprogrammed schedule and thermostatic control. The room is heated by a radiator and cooled by a fan coil device. Specifically, I want a cool room after midnight, sufficiently warm room in the morning and the rest…
-
Wine cellar - temperature
Hi I have a tado smart ac control v3+ in my wine cellar, together with a mobile air conditioner (Point Pro Poac8112). I want Tado to start the airconditioner to start cooling if temperature is above 20 c, and start heating if temperature is below 14 c. Meaning a celsius range of 6.0 is fine. How do I do that ? I have the…
-
Support more than 10 rooms and 25 devices
Please can you add support for more than 25 devices and only 10 rooms, with a 5 bedroom house, with ensuites with a number of downstairs rooms, 25 devices is not enough when you want radiator TRVs and smart thermostats in each room. also limiting the total rooms to 10 does not work in this environment either. Please,…
-
Extension Kit - 3 zone controller
Hi, I have an extension kit to config/install but currently a 3 zone controller is in place beside the boiler. I want to use the extension kit to manage the hot water which is one of the zones on this controller. Other two zones i have switched to always on and have smart thermostats managing them, so dont need to touch…
-
New Ap
Has anyone found it difficult to use the new ap?
-
Upgrade to extension kit
I just upgraded to V3+ with extention kit, so to control hot tap water as well. My old thermostat V2 is connected to the new ethernet bridge, but is also wired. The new V3 thermostat is connected wireless. Should I disconnect the wiring of the old thermostat, or does the system regulate this itself?
-
Ways to reduce TRV noise?
Hi, Just bought some TRV’s and the thermostat to go with it all. Moving away from a Nest. The only issue I’ve got is the TRVs can be quite loud. You can hear them in other rooms. I’ve tried two sets, so it’s not a faulty batch. Does anyone have any suggestions on ways to make them quieter? Thanks!
-
Some questions before buying
So we are 1 week away from getting a new boiler and cylinder and need to make a decision on the thermostat and leaning towards Tado. #1 Is there a practical way to overcome the problem with incorrect TRV readings next to radiators? As I understand it, this is one of the main issues. #2 Can you operate the app/system…
-
How water
Hi all, Don’t know if this is the correct area, I recently had a tado system installed, all working well but there is no where to turn on the hot water or anything in the app about scheduling a time for the hot water to come on. Does anyone have an idea of how to solve?
-
Choosing a tado compatible electrical underfloor heating
Hi, I'm having electrical underfloor heating installed in a new bathroom. Any suggestions as to what system to install that is easy to combine with Tado? What is consider "standard" systems here in Denmark. It's for a holiday cottage, and one use case is being able to turn heating on/off remotely.
-
Where has manual control options gone to?
Hi folks......all my radiators in the house have the Smart TRV on them and they work great and I got all this when it was still on the version 3 app. On the old app, there was a setting to say what I wanted done if anyone manually adjusted (turning the dial) the radiator stats.....which for me IS one of the best features…
-
Set schedule through API
Hello, is there (going to be) a way to set the smart-schedule other than using the official tado app/website? Maybe via a REST-API or OpenHAB ? I would really like to integrate this feature on my OpenHAB UI