-
[Android 11] App keeps logging me out every other day
I've been ignoring this for a while but it's getting quite frustrating. For more context, we are two users in the same house (myself and my wife) both with their own account. I'm getting logged out every other day at random time while for my wife happened once so far. If you need more info please ask and I'll happily…
-
Re changing measuring device for room.
Can anyone help me with this. I have followed TADO'S instructions to change the measuring device for a room i.e settings/rooms and devices/respective room but then I cannot find the 'measuring Device'option. Am I missing something? Any advice gratefully received Keith
-
Tado installation on Worcester Greenstar 25i ErP Combi + Comfort II RF
Hello good people, I have purchased the kit including Smart Thermostat (seems to be both wireless and has terminals at the back), Internet Bridge and Wireless Extension Kit and I would like to ask for some help installing this. Unfortunately I cannot find any electrician available before Christmas so I want to attempt…
-
Automatic turning off
Quite recently my heating has stopped turning off automatically when I leave the house, I don’t have the word automatic on geofencing how can I change it so it will turn off when I leave the house
-
Automatic turn off
My heAting has recently stopped turning off when I leave my house how can I change it back
-
Boiler doesn't stop after schedule
Hi, I have recently gone from a Honeywell CM907A to the Tado smart thermostat. The installation went well as far as I can tell. I had 4 wires, Blue, Red, Yellow and Green/Yellow. Only the Blue and Red looked to have been used, going to A and B on the old thermostat. As per instructions B (red) went to NO on the new…
-
Does tado valve have multiple setpoints or only full open or full close?
Last night i noticed that increasing the temperature of only few degrees made the boiler run (even 2 waves) but the radiator stayed cold. Then I dismantled the valve from the radiator and noticed that only setting the temp considerably higher made the valve open. So i am wondering if the valve can open gradually or has…
-
Two Devices in the same 'room' using different controllers
In my Kitchen-Family Room I have UFH heating which is controlled by a Wired Smart Thermostat, however in the same physical room I also have a radiator that has a Smart TRV that connects via an Extension Kit to call heat directly from the boiler To make this work I have had to set them up as separate ‘Rooms’ as they use two…
-
Shut down a smart radiator
Dear all, I have an issue to ask. In my living I have installed 3 TRVs and a wireless sensor that control them. During Christmas I want to simply turn off one of the trv, near the Christmas tree, but the other two trv to continue the schedule, as usual. Do you have any idea how to do it, and not to be a mechanical action…
-
TRV’s on two systems
Hi, just installed 12 TRV’s on a Nest x 2 system which is still really handy as it gives me greater control over the house. However, I’m having an extension built which going to have a separate combi boiler and will only have 4 rads and hot water. My question is: will the app allow me to select what TRV’s connect to the…
-
Geofencing updates slowed down?
In the last few days the update of location has slowed down so much that I now get home before Tado realises I’m there! This has only just started. Has anybody else noticed this?
-
Installing thermostat wiring confusion!
the wires to my existing thermostat have a diagrams for the cables. 3 wires are : COM, Demand & N. COM obviously gets wired to COM but what about Demand & N? Is Demand NO?
-
Tado wireless thermostat connected but no heating
I have a small problem. I received my Wireless Tado Room Thermostat today and a guy tried to fit it for this evening. On completion of the installation, I have found myself with no heating (but I do have hot water) Here is all the information I have. The boiler is a Intergas HRE The Wireless receiver which is connected to…
-
Smart Radiator Themostat problem
Hi, I am setting up my new Tado system and all was going well until I started installing the radiator thermostats. two are working fine but the last two had issues pairing and now they don't have any sign of life at all there are no lights on them and they don't say Hi if I take out the batteries and put them back in. I…
-
2 week schedule
Is there a way to set a 2 week schedule?
-
No Heating or Hot water this morning
I have the V3+ system controlling my heating and hot water . This morning the hot water and heating did not fire up and when checking the controller it was showing the power light ,internet light and the error light. to get rid of the error light I switch the power to the controller off and on which fixed the problem. I…
-
As far as I can tell, the Tado software doesn't work at all. Would love to be proved wrong!
I have four Smart AC Control V3+s, all controlling individual Midea A/C heating units. I bought the Tado's as a way to get the heaters onto HomeKit, but HomeKit integration is abysmal, so had to give up on that. So I've been trying to use the Tado app. I've set up schedules (a pain to have to do all of them individually,…
-
HomeKit thermovalves not responding
I have successfully configured two thermovalves and an internet bridge in the tado app. Unfortunately, inside the Apple Home app, the thermovalves show the label 'not responding' most of the time. On some occasions one or both of them return to work for a short time. Then they return to the 'not responding’ state. From the…
-
Set up 🧐
Have I set this up correctly 6 room apartment. Bed 1 x tvp Bed 1 x tvp Bathroom 1 x tvp Kitchen 1 x tvp Living room 2 x tvp (2 rads) Hallway 1 tado thermostat and I have radiator with nothing on it.. should I fit a tvp on it.
-
Tado - OpenTherm issues
Hi, I recently replaced my boiler with an OpenTherm setup. I'm having issues with big temperature drops whenever most of the heating is turned off. I hope someone can shed a light on what might be wrong. - Setup: ○ Wired smart thermostat connected to Bosch GC 7000iW-28 C with Bosch Opentherm convertor EMS-OT (7746901847) ○…
-
Technical error, Customer support wont help me and sends me here for "the engineers"....
Well, like the title says. Customers service (Akhilesh you lazy Bxstxrd) seems to point customers with a problem here to sort it out themselves instead of helping. So where are those "engineers" who need to get "notified" of this problem??? Problem: User manual said loud and clear that the radiator thermostats will turn…
-
Home improvements, zone learning?
I have just installed some new windows in the bedrooms, each has its own TRV and wireless sensor to make seperate zones. Is there a way to reset the “learning” as it doesn’t seem to heat the rooms correctly
-
What do I need to get started?
Hi, and thanks in advance for any help. I'm looking for advice on what to buy to update my current room thermostats? The current setup is as follows; Potterton Promax SL boiler Danfoss TP9000 Si 5 day/2day programmable room thermostat with Danfoss TS2A Remote sensor. (downstairs) Honeywell CM707 Digital programmable room…
-
Help please! Stuck but think it should be straight forward!
I have an external 'Ideal' boiler', one wired thermostat, one programmer which controls heat and hot water. The hot water comes from a dual tank inside (ie: has hot and cold water). Where the tank is, there are separate controls for hot water and heat (ie: when you turn on heat, one of the controls turns on, with water,…
-
Why does my smart thermostat switch off before the temperature is reached?
Hello all, after some advice please. I've recently added a 2nd smart thermostat to control a new zone in my house (wired to the 2 way valve) which switches on the heating perfectly. However... The heating is switching off before the demanded temperature is reached, not only on the new zone, but also when I try it on the…
-
Internet bridge stopped working (be warned)...
Hello everyone, Our internet bridge has stopped working! There are no lights on the device despite trying different cables and USB plugs/sockets. This has meant we can't connect to our devices making the whole system useless. Has anyone else had this or had any experience opening one of these up to fix? I've been in touch…
-
Boiler not turning on when it was earlier via app
Hi, I had the tado installation kit (wireless version) connected earlier. App connected all good to the internet bridge and temp sensor which is currently in the kitchen. On the app now there's green icons for both pieces of kit to indicate all working as expected. When I click on the temperature sensor it shows the…
-
Tado Radiator Valve Positioning
Hi - I am sure this has been covered, but after 10 mins of searching the forum I gave up. Apologies Does the temperature sensor in the thermostat read from the little hole in the top of the TRV? If so, should that be positioned at the point furthest from the radiator (I currently have them positioned where the temperature…
-
russian brides.com
We are in a generation where people are inclined more towards a relationship. But sometimes, finding the right partner seems to be a difficult task, and people end up with disappointment. If you also feel like the relationship is not your cup of tea. For more information visit: russian brides.com
-
moving home and selling my Tado devices
Will be moving to an all electric retirement flat and the new owner of my house does not want the tado installation so will be looking to remove and sell. I have the smart hall thermostat , 5 radiator thermostats and an Internet bridge. Am I right in thinking that if I go into settings and then click on each device and…