-
Heating off but graphs show heating
I have all heating switched off but the graph for one room shows that the heating is on. Also the heating seems to come on despite the heating being turned off. Anyone else experience this?
-
Clearer guides, manuals and information
Having just got my first tado, I think the information available could be greatly improved. I can't find any useful guides on how to use my smart thermostat (I.e. What do the different symbols mean when clicking through). Also all the new product pages assume you already know what you're looking for. From what I've seen, I…
-
HomeKit functionality to manage hot water
Hi, When will this simple functionality be made available? Surely it can be simply done? Is it a cost factor for licensing that is holding it back? If not why isn’t this a function?
-
Refurbished Tado
I just realice that Tado is selling refurbished products. They must have hundreds of returns because you can put orders through on their website for at least 99 units of any of their products.
-
Energy IQ - official press release vs faq
Official press release: https://www.tado.com/gb-en/press-releases/energy-iq-en FAQ: https://support.tado.com/en/articles/3478786-what-does-energy-savings-energy-iq-show-me (1) Press: [...] at launch, Energy IQ allows its users to have their exact heating costs and energy consumption displayed transparently at any time. (1)…
-
HomeKit thermovalves not responding
I have successfully configured two thermovalves and an internet bridge in the tado app. Unfortunately, inside the Apple Home app, the thermovalves show the label 'not responding' most of the time. On some occasions one or both of them return to work for a short time. Then they return to the 'not responding’ state. From the…
-
SRT Exercise Routine
Does anybody know whether the Tado system has some kind of exercise routine built in to ensure valves remain operational?
-
Wiring for the ecotec plus 938
Hi, looking for the step by step wiring set up for the ecotec plus 938, its a combi boiler and i have fitted this kit on may other boilers, but they all had external thermostats so it was very stright forward. any help or links would be great. thanks again Bugg
-
Help in wiring for Vaillant EcoMax
Hello ,This is my first post here for help so please bear with me if this topic has already been discussed before I have got Vaillant EcoMax 24k Combi boiler (no hot water tank ) I ahve bought a new wireless thermostat V3+,And my boiler or house dont have any kind of thermostat installed at the moment Bit confused with…
-
TADO No Longer Supports Hot Water Control via Google Home
Hot Water used to work until a week ago and Tado quietly dropped support for it but have not updated their support pages. The hot water control now just appears as a greyed out blank thermostat. This help guide says it should support hot water control which was updated just a week…
-
www anastasiadate com reviews
-
www anastasiadate com reviews
-
Buderus EMS
Hi! Has anyone managed to get tado to work with a Buderus EMS Boiler? They confirmed tado was compatible with my Buderus GB-122, I've been changing mail with support for a long time and they confirmed I did all the wiring right, they have even sent a replacement for my wireless receive and still the heat will not start. I…
-
Software Keeps asking me to logon
I set up Tado a few days ago but the app on my Galaxy S10+ keeps asking me to log on again. Why?
-
No hot water again
So tonight the Mrs. is in the shower and said, "is the boiler on, shower is cold". So I test turning the hot water on via the app and sure enough nothing happens at the boiler. I then notice the app has changed. Coincidence? I'm now without hot water and no idea why. Heating is working.
-
Heat demand seems to be almost always on.
This is a screenshot of the heat demand for my lounge. Could anyone comment on whether this looks like a normal level of heat demands please.
-
Whats Wrong, Fuse keeps blowing
I purchased the Tado wireless V3+. I have a plumb centre 340000 controller. I have followed the installation instructions via the app and wired the wireless receiver as instructed. When I switch the power back on, the unit pairs with the internet bridge and appears to be ok. press the testing button for the hot water which…
-
Does the Wireless Receiver control heating or just hot water?
I have the tado Smart Termostat V3+ starter kit and Radiator Thermostats. I have a combi Potterton boiler. The kit I have does not have a Wireless receiver that connects to the boiler. Do I need one to control heating, or does it just control hot water on regular boilers? I do have the USB dongle that connects to the…
-
Tado thermostat doesn't ask for enough heat
Hey all, Yesterday I noticed the room getting a bit cold. I checked the app and I saw a difference of 4C of what is being asked. It's requesting heat but radiators are cold, heater isn't burning, but it does work when I need hot water (not tado depended). When I remove the tado from the connection, the boiler heats up to…
-
Installing Controller - Missing Connection to Terminal 3
I've just bought a Wireless Smart Controller V3 Starter Kit (Heating plus Hot Water) and have gone through the installation right up to dismounting the old wired controller (Honeywell ST9400A), only to discover that the only terminals in use are: Earth, L, N and 4. Nothing on Terminal 3! If I understand these things,…
-
Wireless Receiver V3 - Manual (Physical) Control
Having connectivity issues between bridge and devices resulting in hot water not coming on. Whilst I attempt to resolve this by moving the bridge, is there any way to manually turn hot water/heating on or off? Pressing the test buttons once on the wireless receiver do it, but the test mode only lasts for 2 mins. I’d like…
-
Fitted Smart valves, now my heating is all over the place
We have a Tado system, with wireless thermostat and network bridge, and originally no Tado Smart valves, so effectively one heating zone. The system worked well for ages, turning on at the appointed time, and going off per the setting. My other half wanted a bit more control over the bedroom heating, cooler in the morning,…
-
Tado App on my phone
Hello When I had my boiler installed they fitted the thermostat on the wall in the hall and set the app on my phone. This had been working beautifully, but now the front page that shows up when you click on the heating is stuck on 19.5 with a sliding bar to set the heating higher or lower. Below it comes up message showing…
-
Three Zone Control Possibilities
I have been in contact with Tado CS who have suggested that i am unable to install a tado system in my home due to to the current three zone config, but other articles on here (And a user i know) have suggested that this may not be entirely true? Setup (As picture) Upstairs, downstairs, hot water (with tank) all…
-
Timed vs Constant Heating
My system is set to heat rooms between 07:00-23:00. Overnight, outside these times, I have set a default temperature of 17DGC below which the heating comes on. This quite often means the heating is switching on and off intermittently throughout the night resulting in a number of temperature overshoots as well as the boiler…
-
Connect wireless thermostat to existing wired
Hi, I have bought and installed the wired thermostat in my living room, but I want to measure the temperature from the main bedroom. Can I buy a wireless thermostat and put it on the main bedroom, so it can start/stop the boiler based on the temperature in main bedroom? I can not change position from the wired thermostat…
-
How would I go about wiring my Tado thermostat based on the wiring of my existing one?
My current Thermostat has a N, L and L1. How would I wire in the tado thermostat?
-
Terrible Support
Your e-mail/chat only support service with a promise to get back within 24 hours is rubbish. I have been a TADO user for years and have been happy until moving home and now cant use my new system. I am currently applying to my Credit Card company to have the £1500 I just spent returned. This is because my questions are not…
-
No physical gas boiler
Hello We just bought a house in the Netherlands and have just replaced our honeywell system with tado but it doesnt seem to be firing up and warming. I have linked and bridged everything. The panels just arent warming up
-
factory reset
anyone know how to do a complete factory Reset on 2 devices......Wired Smart Thermostat & Internet Bridge? I want to start from scratch again as it's not communicating properly with Vaillant boiler and the Vaillant VR65 Control Centre using the + & - bus. thanks