-
Problem fitting extra Tado Valve in a bedroom
I have already fitted a tado control system which all work perfectly well. I now want to replace a manual Danfloss TVR in a bedroom. But I cannot select a suitable fitting I have shown a picture of the valve with the Danfloss valve fitted and removed. To me, it looks like the valve is fitted with a Danfloss adaptor. Can…
-
Offline rads
I keep getting “offline” notifications for mainly 2 of my TRVs. The batteries are brand new out of the box. Unfortunately our modem is a one end of the house (bungalow) and the troublesome rads are the furthest away so I assume this has to do with the distance from the bridge and modem. How do I fix this? (I am a…
-
Vaillant VR65 with eBus and system boiler - hot water works but heating doesn't
Hi, I've just installed a Vaillant EcoTech Pro 630 (system boiler with two zone valves and a vented HW tank) and have added a second-hand Vaillant VR65 wiring centre as I read on here that this is the way to make the V3 Extension Kit talk to the boiler via eBus. Has anyone done this successfully and can you tell me how you…
-
UFH Question
Just moved into a new house and brought our Wireless Starter Kit V3 with us since it worked well in our last flat. I also purchased 8 Smart Radiator valves to go on all our radiators so that is all working well now. Over this fairly cold spell we have just had our living room has been freezing. The seller said it has…
-
Manual operation
I've bought a Tado v3 for a holiday let so I can pop the heating on when it's empty. I've not installed it yet but I was wondering, can you turn the heating off on the thermostat or just reduce the temperature? If you can only reduce the temperature what is the lowest setting? Thanks 😊
-
Why does Tado store location data for 2 weeks?
From the Tado Privacy Policy: ”We will keep your personal information for as long as you have an account with us. After you close your account with us we will keep your personal information for a reasonable period to maintain our records and legal obligations to you. Sensitive personal information such as location…
-
Heating Water
I have a Megaflo system and am wondering if Tado stops heating the water once the water is fully heated BUT the time schedule hasn't been reached?
-
Thermostat switched off but radioator is warm and keeps heating
I have 4 smart thermostats installed. Last week, even though all smart thermostats were OFF, the radioator in the living room was warm and we could notice the room temperature as higher than expected. I did the reset procedure, expecting it to be a calibration issue. It did not help. I then switched that thermostat with…
-
Is it possible to control the 24V fan under the water radiator using a wired smart thermostat?
I have a water radiator at home with airflow from the bottom, model Regulus Revers. The fan is mounted on the bottom of the radiator, powered by 24V with variable speed. The fan speed can be controlled by applying a voltage in the range of 0-10V to the control line. The radiator has also a thermostat SALUS T30NC 24V DC.…
-
Extension Kit not Calling for Heat - dual zone install, old install but new problem
I've had Tado for a few years now. My set up was installed professionally and is dual zones; Wired Smart Thermostat - Controls the underfloor heating circuit in the kitchen Wireless thermostat linked to Extension Kit - Controls the radiator circuit. There are then SRVs on each radiator in the house Just yesterday the…
-
TRVs Without actuators
I am upgrading a whole heating system using a new TADO system with TRV actuators which I have. I want to install new TRV valves but don't want to buy 12 TRVs with manual actuators and then throw 12 actuators away. Does anyone know where I can buy good quality TRVs without the actuators? Or do I give up on TADO?
-
Smart TRV whistling
I have had several smart TRVs in the house without issues. Recently I bought a pack of the newer basic TRVs to cover more rooms. I wanted the smarter TRVs in the bedrooms so switched out the existing sitting room for one of the new basic ones. Suddenly the valve started whistling loudly when the radiator was on. I swapped…
-
Tado and HomeKit Controller Question - TRVs and Wireless Sensors and Hot Water Control
Hi All, I am about to integrate Tado into HomeAssistant via HomeKit controller to allow for local control over my system and I have a couple of questions before I dive in. In some rooms I have TRVs and wireless temp sensors. Obviously using this through the cloud this is seamless you place the TRV and temp sensor in the…
-
@Tado. CONTROLLER WON'T SWITCH TO OFF!
Hi all, If Tado or anyone with similar experience can help me or train me, I would be very grateful. My simple heating system functions correctly when the original Drayton controller is connected. As it did before the Tado system was fitted. So there are no stuck relays or faulty valves, and no TVRs to consider in this…
-
Offline
See we are having another period of Server instability leaving my controller offline and my house heating to melting Same thing over Christmas that miraculously fixed itself when everyong went back in January. Course Server status is up - like it always has been - no down time, hard to beleive!
-
Smart TRV help
I have a TADO V3+ WIRELESS HEATING & HOT WATER SMART THERMOSTAT STARTER KIT to control my central heating. Can I purchase the Tado smart TRV as an addon? Will the smart TRV fit my radiator which currently has a manual valve coming in to the radiator and the bottom. All the pictures it.appears at the top of the rad.
-
Flowmaster trv compatability
Hello everyone thanks for the add anyone fitted the smart thermostat trv to a flowmaster trv? Thanks again Steve
-
Keeping device stickers...where?
Tado helpfully supply a couple of pages in the Setup Guide in which you can paste the id stcikers (with qr codes) from your devices. Unfortunately it only has 14 slots, 2 for the Internet Bridge and Wireless Receiver and a further 12 for other devices. My large system has a further 17 items, and I don't have enough room to…
-
v2 to v3 bridge questions
I have been running a v2 bridge without issue for a good few years. However, I now have a new device that is out of range and wondered if I would see any benefit to upgrading to a v3 bridge. Do these have a stronger radio / greater range? Also, if I was to upgrade the bridge, can the old bridge still be used on a new…
-
Low battery causing heating to come on - no low battery indication
We have Tado rad stats in most rooms, but not the hallway so any time heat is called for, it heats a portion of the house. In the last month we've had 2 stats cause the heating to be on full power as the battery's aren't good enough to open the valve, but good enough to call the heating. No warnings or low battery…
-
Reset "learning" after heating system overhaul
Hi all. We've recently had an extension built on our home, which included replacement and re-piping of several radiators, installation of some new ones, and installation of a new boiler as well. The boiler is wired to a tado extension kit via OpenTherm, and appears to be working as expected. I wondered though if all of the…
-
Smart Room Thermostat choice ?
Hi, I am in an apartment with a shared central heating system. This means that I have to set the temperature per radiator. My radiators are built into a closet with front opening , incl. the taps. So it gets hot(er) fairly quickly there than in the room. So I thought I would install a Tado radiator thermostat valve on it…
-
Radiators only heat up if water is also set to be on
We have a relatively simple gas central heating set up. A traditional but NEW gas boiler (not combi), with TADO wireless receiver, internet bridge and wireless temperature sensor/controller. The controller is in the main living room. None of the radiators have TRVs We have found that whilst we can have hot water (ON) only,…
-
Why is my wired thermostat not pairing?
New house, Tado wired thermostat, radiator thermostats but no bridge. Bought new bridge and paired it along with the radiators but the thermostat either doesn’t pair or at least isn’t connected on the app. It works and display is on. If I hold the the button for 3 seconds the pairing symbol is already connected? Am I doing…
-
Poor internal Insulation/heatloss
Hi, I was looking to see if anyone has the same issue as me? I’m not sure if I am micro zoning too much? I have a 3 level house with really poor internal insulation between rooms. I have downstairs at frost protection as we don’t use it very often, and then I am setting the rooms we are using to 18-19oC and the rooms not…
-
All devices are connected but heating still not coming on.
Hi all, We have recently moved into a new house and it has Tado heating management system in the house. I have: Registered with Tado. Connected the Internet Bridge to the Broadband via the cable and powered it on. All lights are solid on the internet bridge. I have connected to: Valves in 4 rooms upstairs. The Smart…
-
Radiators not remaining fully on when set to highest setting
I have recenty had TADO installed to my house and I am getting used to configuring the system and set up - 20 radiators It is an older sandstone hosue with very thick walls There is one large sitting room with high ceilings with 2 radiators where we tend to sit at night as a family Prior to having Tado as the TRV's were…
-
Increasing the 10-room limit
Is there any update on the 10-room limit? I would love to add more valves to my house, but it has 14 radiators and 13 rooms and I'm maxed out on rooms. I don't see any reason why this shouldn't be possible. This is the only issue I have with Tado's otherwise excellent system. I see that Tado has responded elsewhere with…
-
Latest TADO version - plus beta programs
I am currently using 1.16 - is this the latest alpha or are you all on 1.15? are there any recent new functions? FWIW my system seems to work very well at the moment with 3 TRVs and the other 5 set on 3/7 (occasionally moved to 4/7 when its REALLY cold) cheers
-
Boiler cracked down, installer blames Tado.
Last Thursday, my boiler stopped functioning, apparently some power surge burned the card. But while inspecting the boiler after changing the card, the installer noticed heat coming off and observed a crack in the heating chamber. He asked questions about my heating habit and I told him I used Tado to handle the heating…