-
strv offline in the app
Hi so no battery warning just reported offline after working okay for the last month or so, so i tried to reset it by taking the batteries out for 10 seconds refitting them for a minute and refitting the head nothing. so tested the batteries and showing 1.48v on both so tried again and still nothing so pop in a pair of…
-
Remeha Avanta Ace 28s
I've just got the new Remeha Avanta Ace 28s installed that comes with Remeha RU2 (eTwist) thermostat. I want to use tado thermostat instead. The system has just 2 wires so if I understand this correctly, I can plug these two wires either in: NO + Com terminals - for relay mode and only for heating Digital +|- terminals -…
-
Thermostats keep going offline
I have just had my system updated to Tado which I find fantastic to use but a real pain when it keeps telling me one or both of my thermostats are off line. I have a Combi boiler so my hot water is not connected to my Tado, it basically get hot water when I turn a tap on. We have underfloor heating in the kitchen diner…
-
Room t/stat relay sticks in the ON position.
Reported to Tech Support and they 'pushed' it so it now works. But as I don't want to ask for support every time this happens is there a way I can 'push' it myself? Resetting doesn't work.
-
Is there any software updates improvements coming?
Since I have had the system for 2 years now there has only been an app upgrade but no issues with the system software have been addressed is this ever going to change?
-
TADO lockout of boiler
Ive noticed something - if I want to boost the temp in my flat from say 18 deg to 21, sometimes the boiler will NOT flame (return flow temp stays at 25 deg without the boiler firing up) even with the smart TRV fully open, unless I turn all rooms off first on the app then hit boost. Has anyone else had this issue? Is it due…
-
Compatibility
Hello, I planning to buy tado thermostat, starter kit + 10 knobs. I have two questions. I have Remeha Avanta 28C boiler, Remeha Isense Thermostat and old radiator knobs. 1-My knobs looks like in the image blow, do I need to replace my manual valve with an M30 x 1.5 mm thermostatic radiator valve to connect with Tado Smart…
-
Energy iq
My energy iq isn't showing my usage graph, just keeps buffering, anyone else got the same problem?
-
Does the EU wireless extension or starter kit work as it should in the UK
Does this https://uk.installers-shop.tado.com/products/add-on-wireless-receiver-for-combi-boilers work exactly the same in the UK as in Europe and contain the open therm contacts? The starter kit states it but not the individual wireless extension kit.
-
Worcester Bosch Tado to EMS
Hi all, I’m new to this site, My company is a Worcester Bosch accredited company that has been around for 15 years, I have recently completed my Heat Geek course and am looking to fit better Weather Compensation Controls and Priority Hot Water to new installations and possibly retro fit for my customers who are looking to…
-
Tado wireless thermostat and smart trv
So I have installed 6 smart trv,s and have a tado v3+ as the wireless room stat. I have mounted the room stat in the hall and also fitted a smart trv to the radiator in the hall. All smart trv,s are set to use the wireless room stat as the zone controller. When I set up schedules for each room should I have a schedule set…
-
Please Delete
Please Delete Please Delete
-
New User Trying to get my head around how the sytem operates
Just had my old boiler and Hive system replaced. I now have a Wireless receiver, Wireless Thermostat and around 50% of the radiators have smart thermostats installed. When I open the Tado app on my phone there are buttons for Hot Water, each of the Smart Radiator Stats and the Wireless Stat but there is no button for the…
-
Radiator Thermostat Battery
Hi. We installed Tado into our house in September 2022. There are 9 Radiator thermostats. All working perfectly, apart from one room. It says the battery is low. I've changed them twice since September. Last time was on Saturday (2 days ago) and again today the low battery warning has come one. I'm not using rechargeable…
-
Battery needs replacing after 2 weeks
Just had the Tado system installed in an annexe attached to main house, around 2 weeks ago and just received an email alert to say one of the thermostats requires new batteries. My plumber told me they should last months even a couple of years?
-
Opentherm settings for ANY boiler using ARDUINO
You may all find this interesting - have a look at the modules - apparently the whole setup is about $3 https://community.home-assistant.io/t/thermostat-and-boiler-controller-for-ems-based-boilers-nefit-buderus-bosch-using-esp/53382
-
Smart TRV vs Wireless Temp Sensor
Smart TRV is in Room 1, Wireless Temp Sensor is in Room 2 (Manual TRV left on 3). Imagine both Rooms are set for 21degrees Room 1 is 19 deg so is calling for heating, Room 2 is 22 deg so wants to cancel - which gets priority? the sensor or the smart TRV?
-
Opentherm, is it working?
Hi I've recently discovered that my baxi boiler is opentherm ready. I noticed that my installer had set up my extension kit as a relay instead of opentherm. I opened it up and wired it in as described on the tado app. My only concern is I don't know if it's working or not. I'm hearing my boiler run almost constantly since…
-
How do I remove a phone from GeoFencing?
I have added the app onto my tablet which in turn has included it onto the GeoFencing feature, how do I remove this, I have deleted the app off my tablet but it is still showing.
-
boilers starting on it's own
Hi, over the past few days we've had issues with the boiler starting up when not called to do so. this morning it was on again - after it had already been on for the schedule. turning it on by my phone then turning off seems to turn the boiler off if that helps. can anyone help please.. dont want the heating going when I'm…
-
Temperature Display
The unit is black, the only time anything displays is when the button is pressed or I alter the temperature on my phone. Is this correct as I thought the wall unit displayed the current temperature or am doing something wrong?
-
Pre and post installation Q
Before installing the wireless sensor and smart TRV my boiler used to heat up to 60 very aggressively and all radiators would feel HOT until the manual TRVs felt the room temp was adequate and then they would close off. As a test today I have opened all the rads in the house to 3 / 6 (manual TRVS), have turned on the SMART…
-
wireless smart thermostat V3+ with programmer - functionality
I installed radiator smart thermostats in every room and connected to taco app via internet bridge - all working well. Some weeks later i had a professional installer replace a wireless thermostat with the Tado Wireless V3+ - the receiver and thermostat connected with the bridge but i'm getting many off line events via app…
-
Hot Water light on Wireless Receiver on Vaillant Combi Boiler?
Hi there We've recently had someone install a Tado V3 kit to our Vaillant combi-boiler. My question is. Should the Hot Water controls be working? As on the Wireless Receiver the Hot Water / 'Tap' light comes on when the button is pressed, and we have Hot Water as an option in our app? Just concerned all is OK re. set-up…
-
Existing Tado Install - Replacing Boiler (Heatable)
Hi All, Just after a spot of advice and experience. My boiler (circa 2005) is limping through the winter and I’m going to replace it. Happy with a quote from Heatable for a Viessmann Vitodens 100-W 25kW. Standard boiler swap. My Tado equipment: Hot water and heating receiver 1x Thermostat 7 x TRV I’ve had no issue with…
-
Kids and the thermostat
When I dissappear from home the kids like to sit in their shorts with the stat' cranked up high. Anyway I can get a phone alert that they are abusing it please? :D
-
Wolf FGB and/or BM-2
Hi anyone has experience with wolf FGB-K(28) boiler ? I have installed tado with extension kit 2 days ago. I wonder how can I setup water flow temperature? Also any experience with BM-2, when only one heating circuit available.? Would it work together? Which one is better using ebus or simple relay mode and let's BM-2…
-
Wireless reciever
any suggestions for when despite repeated attempts by resetting the wireless reciever will not syncronise or connect to the bridge 😊
-
Tado Wireless Receiver Range
I have three story house and the wireless receiver doesn't work on the too floor. Any guidance?
-
Non-SRV radiators getting heat when they shouldn't be.
Hi I'm having an issue in my home, which has a wireless starter kit, and 7 Tado smart radiator valves (4 other radiators in the house don't have SRVs). My boiler is an Ideal Vogue C32 Gen 2. Whenever heat is called by any SRV, the radiators that don't have SRVs are also heated, even though they are in separate rooms. As I…