-
Is it possible to get information from the Tado about the Hot Water supply being active ?
It is possible to set the temperature and a schedule on when the system should provide hot water, but i am missing the information on when actually the system is getting a Hot Water request. (So DHW, not CH !) I used to have a HomeWizard system that showed me when Hot Water was requested. I would need this information to…
-
Changing from heatmiser to tado
I would be grateful for some advice. I have half upgraded to tado, fitting smart thermoses to all my my radiators (7). I would like to add tado thermostat/s.. We have a Worcester Greenstar 42 CDi Classic combiboiler and 3 Heatmiser thermostats. At present only one thermostat will turn the boiler on and if not on the…
-
Multiple radiators in one room
Hi, Some of my rooms have two radiators. They already have dumb TRVs on them and I'm intending to get a limited number of smart TRVs for my house - with the intention of adding more as time goes on. What do you recommend as being the best approach for fitting smart TRVs where there are more than one radiator in a room? Do…
-
How to bridge a Drayton Combi Stat to enable Tado Wireless receiver to work correctly
Hi. Today I had the EU Wireless Receiver delivered to complete my system, however I believe I need to "bridge" the legacy wall mounted Drayton Combi Stat. Does anyone know how to do this? My system is as follows.... ---------------- Vaillant ecoTEC plus 837 combi boiler. No hot water tank. Tado Basic rad thermostat and…
-
Apple HomePods - new software update will enable temperature & humidity sensors
Apparently existing HomePods already have temperature and humidity sensors built in and these will be enabled with Software Update 16.3. I wonder how much this will be able to integrate with the Tado infrastructure. Probably only through HomeKit as I'm sure Tado doesn't want people to be able to buy a HomePod (with all the…
-
Why doesn't the boiler do what I set in Tado?
Hello. I can't control the boiler using Tado. The system was installed by previous owner, but I can't get them to work together. No matter what changes I make in Tado or whatever temperature is shows, my central heating wouldn't stop working and doesn't settle on the temperature I set in Tado. Everything seems to be…
-
New Boiler. Trouble installing my Tado!
Hi all. I’ve recently had a replacement boiler. Greenstar 4000 - GR4700W C. The boiler was upgraded (unknowingly) and therefore came with a wireless thermostat. I own already a Tado wired thermostat which worked fine with the old boiler. I’ve downloaded the manual for the boiler, but either cant make sense of how to wire…
-
Thermostats to control TRV
I’ve got a 4 way underfloor heating manifold (under the stairs), that I want the smart radiator heads to control each output on the manifold, is there a way of adding a smart thermostat in each room that will control the smart TRV on the underfloor heating manifold. Thanks
-
RF interference . . .
Last Friday we lost our broadband feed. It’s not yet clear whether the router or the line is at fault though I suspect the latter; OpenReach is sending an engineer to sort things out this morning. During the outage we’ve been operating the TRVs and wireless temperature sensors manually which is a pain but has kept the…
-
Rename air conditioning units
I have since recently air conditioning units in different rooms at home. I bought the airconditioning system from Tado thinking it would have similar features as the heating knows when using the app. But it doesn't. It's impossible (to my knowledge) to rename the separate units in the app, meaning that I'm too often…
-
2 zone system, no hot water, combi boiler
First things first, i am amazed by the minimal amount of documentation that exists for the controllers! Now, to my issue (which i have seen a lot of people posting but nobody wrote a clear solution). I have a combi boiler so water is getting triggered automatically. I have 2 zones that get triggered as simple relays. I…
-
Multi zone in a 3 storey town house
Hi all, I have set up the Wireless Smart Thermostat V3+ (replaced Danfoss TP9000), a Add-on Wired Smart Thermostat (replaced Danfoss TP5000) and a few Add-on Smart Radiator Thermostat installed on the radiators. My home is a 3-storey townhouse with 2 heating zones. The TP9000 controls the water heating and the ground floor…
-
Modulation control in system boiler
Hi all, I am new to the Tado community, and just purchased a V3+ wireless smart thermostat starter kit as I have a dual hive setup (HW and CH) and am interested in having more control of the system, and hopefully lower energy bills as a result. I have a Worcester bosch greenstar 4000 18kw system boiler with unvented…
-
Tado password with new modem
Having a new modem and it is so long since I set Tado up (trouble free!) that I've forgotten what I might need to do. Presumably change to the new password. Will it just ask for it or will I have to do it in settings somewhere in my account?
-
Don’t understand how it works
Hi. I got a Frisquet hot water heater with its own thermostats. Get 7 heaters at home and I recently bought 7 wifi tado thermostats with a smart thermostat. I don’t want to replace my frisquet thermostat. I just want to use the 7 wifi thermostats linked to my wifi via the smart thermostat. So how to set up such an…
-
Tado for public area heating inside a building
Hello, Is it possible to use Tado Controller in a room which is a "public area"?: There is a radiator with thermostat, that I don't want people to mess with, so temperatures should not be changed by individuals (app only). Is there a way to secure the thermostat so it's not easily removed (and stealed)?
-
What is is control?
I have invested in quite a bit on Tado kit. I have a wireless temperature sesnor in the hall. I have a wireless receiver in my kitchen. I have an internet bridge (currently in the garage). I have smart TRVS in my living room, dining room, and each of my four bedrooms. Radiators without TRVs are located in the hall,…
-
wireless thermostat sensor
how is this mounted on a wall as there a no holes for screws?
-
What Tado components to I need and how easy will be the install?
Hi, I have a two zone system with an Ideal Icos boiler serving two radiator circuits and a separate hot water tank. There is a Danfoss FP/CP 715 Si programmer/controller downstairs near the boiler. The downstairs temperature is controlled by a simple Danfoss 087N110000 room thermostat. The upstairs is controlled by a…
-
Help with new installation to Combi boiler
Hi. I am installing a Tado Wireless to a “Main COMBI 30 Eco” I followed all instructions carefully. The Tado internet bridge, wireless sensor and wireless receiver all work fine together. It is that the boiler never fires up. I have tried linking L to CH COM and isolating the black wire as well as connecting the black…
-
All my radiators turn on at once even when I just turn on one room
I have four radiators and two heated bathroom rails in my flat. I bought four Taco Smart Radiator valves and put them on the four radiators. I've set them all up successfully as separate rooms, with no error message. But when I turn on one 'room', all the radiators heat up rather than just the one 'room' I have selected to…
-
Tado and VR66
Hi I've recently moved into a house that has a Vaillant Ecotec Plus 618 boiler with a VR66 control module with 2 zones (downstairs and upstairs). From looking at other forums i can see the VR66 isn't supported by Tado due to the eBUS controller however there are a couple of work arounds. Has anyone on here installed the…
-
Can I install the wireless receiver in place of a current wired thermostat?
I want to move a current thermostat (E91.713) from it's current location to another room. Can I install a Tado wireless receiver at this location to act as a switch to turn on and off the zone or can it only be installed at the boiler? My house has an air to water system and I don't want to change the setup of the…
-
Ideal Logic Combi C24 boiler
Can anyone give me step by step instructions on how to install the system specifically to my boiler (Ideal Logic Combi C24 boiler)?
-
Viessmann Vitodpend 100W and Tado configuration?
I have three Viessmann Vitodpend 100W but my heating engineer couldn't find a way to trigger the boiler for heating. Do you happen to have the wiring diagram between the wireless receiver and the Viessmann Vitopend 100W? On the Tado installation manual, it says that "L" connects to "Com" and "1" connects to "No". Can…
-
Batteries keep needing to be changed
I keep getting a message that the batteries need to be changed, often as much as every two weeks on one of my radiators. Is it likely that the thermostat is faulty?
-
Create zones
Hi, I have just equipped every radiator in my home with a Tado smart valve, and installed a Tado central Thermostat in the living room. Some questions: Can I group multiple rooms/valves to a zone? eg. all rooms on the ground floor, or all sleeping rooms. Think of drag and drops apps on your phone, it automatically creates…
-
Inviting someone to my Tado home who already has Tado
Hi Hope someone can help. I'm going on holiday and want to give a friend access to my Tado in case there are problems while I'm away that I can't resolve. My friend already has the app and Tado in his own home. What will happen if he's then added to mine? I don't want to mess up his/my set ups if Tado can't do this. Thanks…
-
Hard wired thermostat not working
A few days ago I fitted a Tado wireless starter kit to replace my old thermostats for heating and hot water. After having to get Tado to add hot water to the app it is working fine. Then I wanted to add two hard wired thermostats to control the wet UF in part of the house. Problems! I replaced the old Towerstat RSP with…
-
Change Air Comfort section of APP
On the "Air Comfort" section. There does not seem to be a way to request temperature and/or humidity of a specific room. I get the impression that your algorithm aims for room temperature of 23C temperature/42% humidity. Is 23C not rather high and energy wasteful?. I am sure there is a simple way to modify your algorithm…