-
Energy iq
Energy iq is not showing in my app, i have subscribed to auto assist
-
Energy IQ has suddenly dropped
Hi there, Energy IQ has been working well for us and up until yesterday was showing in line with our energy bills (submitted to improve accuracy). Yesterday however all estimate dropped considerably (ie for November all values dropped from 1000kw to around 200). Can anyone explain why? Or is there a bug currently? As much…
-
Reset Tado wired thermostat
Using the installation app I wrongly changed the wired thermostat so that it was not zone controller. I need to change it back. Please help
-
Various setup Questions
Hi all. I've had a Tado setup for a couple of years now. We were fortunate enough to have fixed our gas rates until May 2023 so we've been using these last few months as a way to try different things to maximise efficiency in advance of the much higher costs coming around. My setup is as follows. 5 bedroom, 3 storey house…
-
Honeywell T3 to Tado
i would like to replace my Honeywell T3 to Tado system. As i only can see 2 wire was connected to the T3. Only the N (COM) & L (NO) as the T3 is power by two AA 1.5v batteries! what should i do? How could i wire??
-
New to tado, should heating warm water
Hi community Just bought house with Tado system installed. Have set heating blocks but doesn't seem to heat water for showers. Owner told us all in same or does anyone know if water is separate. Thanks in advance
-
Does Tado do predictive heating? ie: Get to the defined temp at the defined time?
I currently have a Netatmo which I'm looking to upgrade from. It's great in that it learns the performance of your house, and then uses the current temp to start heating early to get to the desired temp at the specified time. eg: If I want the house at 18 degree at 6:30am it may turn the heating on at 5:30 to achieve this.…
-
Fitting Tado wireless receiver inplace of room thermostat
Hi. I had a wireless v3 kit which i was looking to replace my drayton lp711 timer, on a combi boiler. Also has a seperate room thermostat (rst1). Ive had a look and there are a lot (13+) wires connected to my drayton backplate, as the boiler has an external condensate pump etc as is using other drayton terminals to link…
-
Wireless receiver
I’ve added a new wireless receiver to my existing system which only had radiators. Do I need to log out then back in to get the system to connect to the wireless add on?
-
Tado randomly switching off my heating
Hi guys Recently my tado started switching off my heating. It happens randomly at different times and days. Usually every day or every other day. Whole house heating (I have 2 thermostats covering 2 zones) will be switched to frost protection and won’t switch on until I go to the app and click on resume my schedules…
-
Tado app keeps logging out
My tado Android add keeps logging me out randomly. Reading the tado community I see this has been a problem for a while. Any chance this could be resolved? It's really annoying.
-
Estimated heating consumption
The estimates for my heating consumption are very high and I don't understand why. For December the estimate was £27,817.93; for January, £20,575.85; for February, £16,000.39; and for March, £1311.62. Even allowing for energy companies ripping us off and the Government not doing enough to rein them in, this is still…
-
Have I configured my rooms and zone control correctly?
Hi Despite high expectations, my Tado installation is not working correctly and consistently. I have sent the following request to Tado Technical, but wonder if this Community has any advice on where I’m going wrong? Your thoughts would be much appreciated while I await a response from Tado. I can follow up with…
-
App logs me out regularly since upgrade to v3+
Hi, I have recently upgraded to the v3+ app (last few days) and keep getting logged out of the app and each time it asks me to re-identify what my device is. Never happened on the old app - anyone else had experience of this? I'm running a Huawei p30 Pro on android. Thanks
-
Not responding
Has anyone been having problems where the boiler doesn't respond to the app or manual control on the thermostat? Says everything is working, but nothing happening. Earlier today it wouldn't switch off and now it is won't switch on! Not impressed 😫
-
Hot water on constantly
Brain fart. Please delete post
-
tado devices do not trigger boiler to heat up
I have recently installed a wired smart thermostat (living room) and 3 smart radiator thermostats (all in separate rooms). Aside from that I connected the Internet Bridge to the internet and all devices are paired with it (status: 'Connected'). When I turn up the temperature, either via the app or manually at the device,…
-
Can Tado turn on water heating via an Alexa voice command or routine?
Can you define an Alexa routine such that if you say thing it can turn the hot water on and off? ie: So if you want a quick 30min heat of the water in your hot water tank you can just fire off an Alexa routine?
-
Wireless receiver won't connect to thermostat
I can't get this to work. the thermostat and internet bridge connect but not the receiver or thermostat. Can anyone help? Thanks Alex
-
Cannot setup Apple Homekit
I can’t get my iPhone to recognise my bridge QR code. I’ve tried rebooting both the bridge and phone, but it just won’t work. I’ve also tried entering manually but that doesn’t work either. Any suggestions?
-
Change my bridge
Hi I’ve just bought an upgrade to my system so I can now control the hot water not just the heating. How do I use the new bridge as when I try to add it all it says it that it’s already registered!! How is that possible as it’s brand new. I’ve also unplugged my old bridge and then plugged new one in but still no joy Help
-
Tado TRV's repeatedly going offline
Since having an extension and thus making my house bigger I am having a big problem with a number of Tado TRV's going offline. From what I can see Tado don't offer a booster / range extender is that correct?
-
Which adapter does this radiator need?
I've been setting up the Tado system today including receiver, it all seems to work so far except for this radiator in the bathroom: Instead of a small pin it's got a pretty big one, some of the bits that come with Tado seem to be able to handle this but I can't figure it out just by looking at them. The Tado valve fits in…
-
Receiver relay keeps calling for heat
Hi everyone I have no Internet at the property I'm working at so understand my tado thermostat and receiver won't communicate but I have an issue in that the heating relay in the receiver keeps calling for heat 2 mins after switching system on?
-
Multiple Room stats variable temp demands what kit do I need
I hope you guys can help me with this. Scenario Room 1 TRV set to 23 deg Room 2 (hall) trv set to 19 Deg Room 3 Lounge trv set to 22 deg How many room stats and what kit would I need?
-
Wireless thermostat schedules and smart radiator thermostats
I have a V3 wireless theremostat in my hall set up on a twice daily schedule. The stat is currently set to 18 degrees. I also have two smart radiator thermostats. How do I set up the smart thermostats on the radiators if I want the room temperature greater oir lower than that in the hall? As the heating is controlled with…
-
Ideal Vogue C32 with wired thermostat in OpenTherm mode
Hi, I've recently switched to an OpenTherm setup from my wired Tado thermostat into an Ideal Vogue C32 combi boiler. Despite some issues with Early Start (I might post separately on that one), it seems to be working OK. However, I've setup some temperature monitoring on my CH flow pipe and have noticed something strange.…
-
TRVs won’t grip. Guide says no adaptor needed.
Hi, installed my tado heating setup yesterday. Got extender, thermostat etc all up and working, started on the TRVs. Old one, a pegler terrier ii came off easily enough and the new one seemed to screw on. But then I noticed that the instructions involved twisting and clicking, which of course secures the the two parts of…
-
Vaillant Ecotec Pro with eBus and weather-compensated control
I was reading the manuals for the boiler and wanted to double check If I can use a Tado with eBUS connection rather than RT which is simply on and off. I have Hive at the moment I would only change if I can use ebus connection. Can I use both ebus and outside sensor together? I think the problem with Tado they now have…
-
How can I change the temperature of my boiler??
Hello, i am having trouble using tado. I have underfloor heating and I installed tado with OT, the problem : when tado starts the boiler, it goes up to 60 °C. How can I use tado on OT without my boiler going more than 50 °C?