-
Multiple controller systems
Hi I have a Vaillant ecoTech 637 combi boiler. From that I have a two controllers: HoneyWell ST9100C w THR872C Thermostat that controls the underfloor heating in the kitchen Honeywell ST9400C with a wall mounted dial thermostat that controls the hot water and the radiators for the remainder of the house. I bought the…
-
Thermostat only - when does it call for heat?
Greetings all First time poster - I am considering getting the Thermostat but have a crucial question. Apologies if the answer is documented elsewhere. I have searched before posting and downloaded the app, Until recently we had an aging dial thermostat which started and stopped the the boiler solely based on temperature.…
-
Multiple Radiators - only one heating
So I have 4 Radiators. All with TRVs in the living room. The Temperatur is set to 20C. When it fell to 19.9C I heard the valves - so that’s fine. 15 minutes later I checked - and the radiator I am sitting next too was still cool. And only one - the one which I use as sensor is warm. Shouldn’t all four heat ? Or does it…
-
Multi Zone Control handling by tado
Sorry for spamming, but haven't got any reply from Get Started board. Hoping to get more technical answers from this board. https://community.tado.com/en-gb/discussion/comment/15830/#Comment_15830 Thanks in advance
-
How do I link two Thermostats to one room?
Hi, my lounge has two radiators, now each with a Tado Smart Radiator Thermostat. I can't find anywhere on how to pair them as one room ? Any suggestions? Thanks in advance, Tim
-
What do I need!
Hi I am looking at getting tado but I am really confused as to what I need! We currently have a wireless thermostat. We want to be able to control certain rooms individually but not all and then the rest of the house be controlled by a thermostat which we can put in whichever room we want so our current system. From what I…
-
Re: abbinamento teste termostatiche e termostato
-
New Thermostat
Hi, I dropped and broke my thermostat. I bought a new one and paired it straight away - the heating is working as normal but the hot water does not. Any ideas on what I need to do? The old thermostat is still showing on the app - but I cant see any way to delete and the new thermostat has been assigned as room 3, I…
-
Are Tado's Servers Down?
As of around 10 minutes ago I was greeted with the attached on the iPhone app. WiFi working fine on all other devices, about to reboot the bridge.
-
Setting Up TRVs in Bedrooms
Our upstairs is one zone controlled by a non-Tado wired wall stat positioned on the landing. There’s no radiator on the landing. I want to be able to control the temperature in each bedroom separately. Can the Tado Wall Stat be setup so that it doesn’t read the temperature closest to it but just takes demands for heat from…
-
Connecting tado to heatmiser ufh
Hi i have managed to set up wired thermostat in hall and 6 trv and all working fine as they should be after replacing Siemens wired stat and dumb trvs still 2 dumb trv in bathrooms last bit I need to solve is the final area of house kitchen/family room which has wet ufh on separate loop but not valve as main heating…
-
Tado wireless sensor
Does this new sensor address the problem of poor TRV connection to the internet bridge by acting as a sort of link, i.e. does it talk directly to the TRV or via the internet bridge? I am struggling to get one room to have meaningful connection to the bridge...it says more often than not ‘no remote access’, not helped by…
-
new Wireless Temperature Sensor: way too expensive?!
I’ve just received an email announcing the new Wireless Temperature Sensor (and a 15% first offer discount). Great to hear about this new device and I’ve a few ideal places to put one. However.... €80 to buy?! That’s the same as a radiator thermostat and yet all it does is read the temp (no motor to turn on/off the…
-
Manual control.
Why have the options, when using manual control, disappeared? With the older software for 'smart radiator thermostats' there were option to set if a thermostat temp was adjusted by turning the top. Options were 1. Until you cancel. 2. For a set time. 3. Until the next time block change. There is now only option 1. This has…
-
HELP: HEATING TURNING ON SPONTANEOUSLY
I previously only had problems with the extension kit disconnecting & heating not turning on. Since September I no longer have this problem after upgrading my bridge BUT Now my system turns on at random intervals, usually during the night, or System doesn’t turn on but everything is connected ok, only solved by using…
-
Extension Kit Cable Source in UK?
Hi, Just had a new boiler fitted and my present cable going from the extension kit to the boiler is a little tight so I could do with sourcing a longer length. I can find 4 core but not found one like the Tado supplied cable, I would prefer the same colours internally .... has anyone found a suitable supplier in the UK?
-
Help!!? Tado Internet bridge
Hi All, This has stopped working for me. The power light is solid, but the ethernet connection is not. What could cause this? Same cable and port work no issues on the laptop. Have tried a few other ports and cables to be 100% How can I now control the hot water? How can I get a replacement bridge, can you buy or should it…
-
To have child Lock function.
TRV child locks
-
Tado smart ac controller - disabling smart schedule
How do i disable smart schedule? Really weird if there is no option to operate without scheduling. I have tried everything but no succes.
-
Radiator
Hi, Is this radiator compatible with tado smart thermostat? https://share.icloud.com/photos/0sDs1imLdnbHIYxbZf2vfrpKA#Klarenbeek
-
TRV Lock (child lock)
Is there a way to lock any manual adjustments via the TRV? many thanks
-
installer Menu page 13
on this page you are asked to press and hold button for 3 seconds move to next step and press and hold button again. You must press and hold one more time to get to R01
-
Radiator values need to turn on boiler!
I have a tado with extension kit and 8 radiator values. It is HUGELY disappointing that they won't turn the boiler on unless the master thermostat is also on. Please can this be sorted ASAP? Otherwise what's the point!? Many thanks
-
Re: Notification when device looses connectivity
-
Couple of questions before i commit
Hi Everyone, I'm looking into upgrading my heating system to Tado and just had a couple of questions. My current system is: Unvented - S Plan with a Bosch Greenstar 18ri system boiler and the following radiators Thermostat is a wired Heatmiser in the hallway connected to a Honeywell programmable timer in the airing…
-
Using Tado thermostatic valves with Hive system
I have a Hive system which works well for the main boiler and heating but the radiator valves are rubbish. If I want to replace just the radiator valves but not the Hive hub what Tado kit do I need to buy?
-
New House!
Hi - just about to complete on a house move into a 20 year old property, around 2750sq ft. I’m keen to get the heating running efficiently, utilising to start with the existing boiler, so after some tips with setup please? Boiler is a Potterton Suprima 30-80, with a 2 channel Horstman Channel Plus controller. I believe the…
-
starter kit with HW control
I've recently installed the starter kit but am unsure how the hw is controlled- the extension kit replaced a honeywell 9100C. I suspect I may need to do some more wiring, but am unsure what. Thanks & Regards Andy
-
Portable AC Unit that works with the Tado AC Controller?
Hi Folks. New Member, but had a Tado Boiler install for quite a few months and very happy with it. I recently grabbed the AC Controller add-on in the Amazon sale and I'm looking for a small Air Conditioner for my Office thats compatible. I've chatted with Tado support and they tell me pretty much any that have a Remote…
-
Smart Trv’s
I would like to install smart trv’s on the upper floor zone 2 to call for heat but I don’t need the wall mounted thermostat, is there a way to do this and if so what parts would I need?