-
New Installation - Smart TRV Question - Please Help
Hi there, New user out of depth and in need of help. UK user with a 3 bed semi detached 2 storey house. The house had been running on an old combi boiler for years with 10 radiators using traditional radiator valves (1 to 5 on the dials). Never had a ‘central thermostat’ in the old system. About 18 months ago old boiler…
-
Recommendations for configuration
Good evening. I hope that you are well. I currently have an Ideal Instinct 24 Combi boiler with a Nest healtink connected to it. There was no wired thermostat in my house when I moved in and so I have a wireless Nest thermostat device which I can move around the house and plug in wherever it is needed. All of the radiators…
-
Wired thermostat
Is there a way for me to change the room my wired thermostat is assigned to? The wording for the room is currently faded unlike all my other devices.
-
Wireless reciver
My wireless receiver loses signal frequently, what could be the reason? I will add that the internet connection is ok
-
underfloor heating wireing centre link to tado ?
Hi there I have a new build double store house . I have two main zones one on each floor but inside these two main zones i have multi zones for the underfloor heating to every room that are all linked back to a single manifold that each room can be controlled by actuators for ultimate control . Normal all the actuators are…
-
Wired smart thermostat vs wireless smart thermostat
I've bought a house that appears to have a basic system with a wired smart thermostat in the hallway and two bedrooms with Tado trv's. All other rooms have rads with non-Tado trv's. To improve the system and make it more efficient and rather than carrying out re-wiring would it be easier to install a new wireless…
-
Attention Moderator: Lost User Account for GrilledCheese
Hi community moderator, my user account account GrilledCheese has disappeared from the system. Was working in the morning, but when I came back tonight to update a discussion on IFTTT it was gone. Are you able to reinstate it and my posts? 🙂
-
Separate thermostat with smart TRVs
Hi all, I have smart TRVs on most radiators which are working well. However, the location of the thermostats behind curtains, next to radiators and low to the ground affect the temperature reading. There thermostat quickly senses heat from the radiator and thinks that the room is hotter than it really is. Whilst this can…
-
How should the extension kit be wired for a two zone system?
Just had my installer to fit Tado to our heating system. We previously had two wireless stats controlling the upstairs and downstairs zones independently. The engineer could not complete the work as he couldn’t figure out how the extension kit should be wired for two heating zones. He said it was only possible to wire it…
-
Extension kit not pairing - new install
Evening all. new member with a new install and a small issue. during the first attempt at installing I messed up with the instructions and basically ended up not being allowed to progress as i needed an engineer to review my configuration. This was an error on my part choosing wrong options. I had all the kit installed and…
-
How to remove Smart Thermostat from my devices?
Hello, registered the Smart Thermostat (is not the same as Radiator Thermostat) with my tado setup and now can't de-register (remove it). When I click on three dots menu for that device in my "Room and Devices section" there is link to the Help Centre only, which, ironically, does not help at all... Thank you Alex
-
Extension Kit - how to make sure it is working properly?
Hi, I have Tado TRVs on several radiators all working very well. This year I decided to add the Extension Kit so that my boiler will turn off when it is not needed. My setup: I have 8 TRVs in different rooms, the Tado bridge and now the Extension Kit. My boiler is an old one, Immergas Eolo Mythos, powers up radiators + hot…
-
Tado AC and radiator control in same room
Hi I´m new here and unboxed my first tado smart heat device yesterday I have long-distance heating system in my house, don´t know if thats the right word. (Two pipes coming from the street with heat to my house) In my living room / kitchen / entrance, I have one AC controller and 4 radiator and one wood stove. So I have…
-
Apple Homekit Setup on iPhone
Hi Over the weekend I have installed the Tado Bridge and Thermometer for my new boiler installation. The Extension kit is being fitted this week when the engineer comes back. I did all the initial set up on my iPad and therefore can see the current temperature in the Homekit on the iPad. However I also wanted to add the…
-
New Radiator Thermostats Misbehaving?
I’ve just installed Radiator Thermostats on three radiators in one room. The one that’s set as the Measuring Device is not coming on when the other two do. Surely they should all come on together? It’s ironic that the measuring one is the one that’s not. I have tried deleting and reinstalling this one, but I’m still…
-
OpenTherm 2 zones
Is it possible to have this set up, 2 thermostats hardwired to 2 zones valves (upstairs/downstairs) . Also the 2 thermostats connected wirelessly at same time to the extension box and then wired to boiler via opentherm. Same as diagram 2 on this page with the exception of final connection opentherm from extension box --…
-
Settings printout
Elderly and infirm I much prefer a paper record of my room settings that I can refer to rather than use computer. Is it possible to make a print out for different rooms or a composite picture?
-
Heatline 24
Hi guys, fitted the extension and the bridge both are showing connected, but not showing in home devices, only in settings. I also fitted the wireless thermostat and that says unfinished installation. Been through it twice with 2 different types of boilers as I don’t have a room thermostat anyways and both times it said…
-
How can I remove a registered Smart Thermostat
I am new to this and have recently bought the Tado starter kit. I registered the bridge and Thermostat without going through the step by step guide to wire it and get it working with my boiler. How can I reset it back to where I can use the online step by step guide
-
How often do you temporarily boost a room
-
Heating system Vaillant
Dear Tado company! I would like to ask you. I have a Vaillant heating system in my house. Boiler type ECOTEC Plus 236 / 3- 5 The main control central unit: auromatic620 Type of thermostats in three rooms: VR90 (comfort remote switch) I bought your products: tado Starter Kit Smart Thermostat (V3P-SK-ST01-TC-ML-00) VT1907…
-
Advanced options
Hi, Reading through the forums it appears that I need support to make a back end change for me to get my Smart Radiator Thermostats to call for heat from the correct zone. Has anyone found a different way of doing this without waiting hours/days/weeks for support to reply? I was hoping there was an "Advanced Options" tab…
-
How do I turn heating off?
Seems quite simple but how do I turn the central heating off? I have an unvented system with extension kit and six Tado rad valves. Thanks
-
Towel rail radiators
Live in a dorma Bungalow, the upstairs bedroom doesn't get used but has two rads either end of the room with tado stats, I also have two towel rails downstairs (shower room & bathroom) both get very hot but have no way of controlling the heat when a radiator fitted in another room with tado stat calls for heat, both towel…
-
Smart wall thermostat
Why would I need a tado V3 wall thermostat if I have tado rad thermostats which connect to my boiler via internet bridge and wireless extension
-
Smart wall thermostat
Why would I need a tado V3 wall thermostat if I have tado rad thermostats which connect to my boiler via internet bridge and wireless extension
-
Worcester Greenstar 30i boiler / Tado Extension Kit
Hi, I have a Tado smart thermostat and a extension kit but struggling to get it working. I currently have a Worcester Greenstar 30i boiler connected to a Honeywell BDR91 which wirelessly links to a Honeywell EHE0200361. I would like now to connect my extension kit directly to my boiler and use it with the smart thermostat…
-
Where to start, old house new combi boiler
Hi, We've just moved into a 60's Semi that looks to have had a single zone Gas Central Heating retro fitted but recently has had the boiler replaced for a fairly new Baxi Combi boiler. The house has a single mobile wireless controller (receiver box located separate to the boiler, but next to it and wired in and a total of…
-
Can't access rooms and devices in the app
Hi guys, when I access rooms and devices in the app I get the following error (see below). I'm on an iphone and my wife gets the same error in her ipad. I've tried restarting the bridge, recent updates to the app, etc. Is it just me?
-
Is Tado compatible with the ecoTec plus 824 boiler?
Is Tado compatible with the ecoTec plus 824 boiler? https://www.amazon.co.uk/Vaillant-ecoTEC-Plus-824-boiler/dp/B009XA2Z1K