-
No hot water
Set up is a Potterton Open Vented holier on open vented system. 12rads with Tado TRVs on, one megaflo, 3 port valve plus one two port connected to the cyl stat and a hallway thermostat. All working fine controlled by a Honeywell ST6400C which I replaced with an Extension kit. Rewired the Neutral, Live and 1, 3 and 4wires…
-
Different CH and HW set points
Hi, I Have a tado an Vaillant ecotech+ 424 installed for 4 years in an open vented radiator system with a HW cylinder on separate solenoid valve controlled circuits. I'd like to be able to set a max flow temp of 50 deg C for central heating (to make the boiler condense) yet 60 deg C to steriise my hot water, always running…
-
How does it work without auto assist?
Hi, Struggling to understand what features I get with Tado without paying the monthly subscription. My proposed set up is as follows: - Smart thermostat - Smart TRVs in some rooms (probably 3 or 4) - Extension kit as my current thermometer is wireless. I'll try and break this down into yes/no questions where I can: - Can…
-
Tado boiler control
Hello, We've been using Tado radiator thermostats for nearly a year and really love them. Currently, we are using the Hive system for our main house thermostat (and have a hive controller for our Hot water tank). This system works really well, as i can control the boiler to switch on and off when we need it, and then just…
-
I want to be able to control all rooms on their own, system boiler, one room stat, programmer bust
Hi all, I want to be able - in time, control each rad in the house. I have system boiler, hot water on second circuit. Room stat is in house and I want to shut rest of house off whilst working in study and also control which rooms get how much heat when I think I need a starter kit and the smart valves for each room (£…
-
Controlling Manual Rooms?
Apologies if this is a basic question. I have SRTs in most of my major rooms. I have a tado Wireless Thermostat in my hallway, with the minor rooms (eg hallway/bathrooms) having manual radiator thermostats. My questions are these: (1) if the Wireless Thermostat is set low or off, will the minor radiators still come on if I…
-
Biasi Advance Plus 30c + ext + opentherm compatible
Hi all I've received my Tado starter kit and extension kit. Does anyone have experience of connecting the extension to a Biasi Advance Plus 30c? Tado installation support have advised the boiler is opentherm compatible and I'd like to take advantage of this functionality. The previous thermostat was wireless and I'll be…
-
Setup temperature sensor problem
How do i do to control multiple termostats in a livingroom with the external temperatur sensor? I only find that i can connect against one?
-
[Solved] Devices showing as offline for no apparent reason
Hi all, As many of you have reported in this forum, there was an issue with certain devices (mainly Smart Radiator Thermostats and Smart Temperature Sensors) where they would show their own status as "paired" but the app would show them as offline. We have identified this issue on Wednesday and a fix was released yesterday…
-
How many zones can the remote Wireless Receiver control?
We are looking to replace a system with two heating zones and hotwater. Can the wireless Recevier with two remote thermostats be used todo this?
-
Smart schedule
I set up the smart schedule but the heating did not come on at set time
-
TRV and thermostat in same room showing different temperatures
Anyone else got the same issue, we have the main (wireless) thermostat and a radiator with TRV. However both fight against each other. Both set at 20c but TRV temp is 22c and main thermostat is 17.8c (currently). They never seem to match. Am I missing something here?
-
Viessmann 111-F et Tado
Hello, I have a new viessmann 111-F boiler with a Tado. I would like to know if the boiler modulates its power with Tado andhow it all works in detail the tado documentation seems light to me on this subject Regards,
-
TRV, howto setup Never close fully
I have multiple heating sources in my house. Is it possible to setup my TRV, so that it is always some degree of circulation in my radiators. A working range so to say, ex 5-100%
-
Number of diverter valves tado extension kit can manage?
I have installed the tado extension kit and it’s working well. I would like to add three diverter valves - currently the system has none. Hot water Annex (7 Tado TRVs) Main house (16 TRVs) Is this possible? If not, what would be the work around? Currently the annex and main house is all connected to one tado wired…
-
Extension Kit / Myson Touch / Hot Water
I have moved house and bought my existing kit with me. I received the instructions to wire up the extension kit to replace the Myson Touch TS EU which controlled the hot water and heating. I replaced the Myson Touch with the extension kit and had already fitted smart radiator thermostats and the heating worked as it should…
-
I feel a little silly to ask this....
But here I go! Hi, I am planning to buy the Tado thermostat sytem for our house. But I cannot seem to be able to make heads or tails of the different possibilies/packages available. Can anyone tell me (or point me to a previous post) on what to buy. We have an oil heater, which is controlled by an old, wired thermostat. We…
-
Boiler does not stop heating sometimes
Hello! I just sat up my Tado system with 7 smart valves and one thermostat directly connected to the boiler. My boiler is a Nefit trendline. The system works most of the times as expected, but it happened in a couple of occasions that the boiler would just not stop heating up, reaching almost 80degs, although based on the…
-
Wired Thermostat
Is it possible to use the Wired Thermostat wirelessly? My wired setup isn't reliable and I'm considering getting the extension kit.
-
Adding Extension Kit has knocked out Smart Radiator Valves
I was using a Smart Thermostat and Smart TRVs to happily control my heating. All devices were able to independently call for heat. I added an extension kit as I wanted to also control my hot water through Tado. However, since doing so, the Smart TRVs can no longer call for heat, the Smart Thermostat needs to be calling for…
-
Two Zones: Both Heating Issue
Hi. My Tado was installed yesterday. This is my configuration: - An extension kit with wireless stat controlling my downstairs zone and hot water - A wired stat controlling my upstairs zone When I turn my (wired) upstairs stat on, only the upstairs radiators get hot (as they should do). However, when I turn my (wireless)…
-
Did I break terms and conditions by recommending a retailer for batteries?
As the topic says, I made a post and included a link to a website for what I believe was a good price for Panasonic Eneloop Pro cells, 15 mins later my post had vanished.
-
Set Up of Smart AC Control incomplete
Hi all - please forgive me if this has been dealt with previously but I searched and found nothing. I bought the Smart AC Control to control, remotely, my Airton AC Unit while I am away from home. I followed all the set up process via the App which I installed on my iPhone. I get top the part where the unit beeps to…
-
Version 1.22.10.13
Hi I’m looking for some help, my Dad has a old version of Tado, and wondered if you can control the heating with no internet connection ? TIA 👍🏻
-
Currently using radiator thermostats only - Why are they hot?
Hi- I have just installed new radiators and they all have Tado smart radiator thermostats. However, my boiler/wired wall thermostat are still old, planning to upgrade this year. When the heating is on, and the main wall thermostat is set to 20C, all my radiators are heating to 20C, even if the Tado smart thermostat for…
-
Are there any plans to provide manual override notifications via the app or IFTTT?
Sometimes I find that the room temp has been tampered with using the room therostat control or sometimes Alexa gets confused with music systems having the same room name (i.e. turn it up in kitchen) and request then becomes active 24 hours a day until someone realises. It would be very useful to get a notification that…
-
How do I stop the thermostat from turning on when only using a radiator?
Ok this might be really easy but I need a little bit of help, in my house I have central heating where warm water is being pumped in to my house by the City. I set up al the pipes so that all my radiator get hot water as soon as I open de radiator valve except for my floor heating, which has a zone-valve directly connected…
-
Nothing asking for heat but the boiler(s) are running
Im finding that when all thermostats are set to off my boilers (I have 2) still run. Why is this? My set up is this. I have a large very old house with big thick walls. Powering the CH and HW are 2 x brand new Ideal Vogue Max 32 boilers. We have 19 radiators in total with 8 of them using SRVs and the others in hallways and…
-
Smart AC - Auto mode not working correctly
Hi When I set my Smart AC to "Auto" mode, instead of maintaing the currently set temperature, it appears to be sending a signal to the AC unit to heat to 25 degrees C. Does anyone else have this problem or is it specific to my model of AC unit (I am running a Mitsubishi Electric MSZ-SF50VE)? Thanks
-
Does tado° have a sensor to know if someone is in the room?
Hey guys, I am a Airbnb host and I'm looking for a solution where my split AC will turn off when there is no movement in the room or when a door is left open for a specified time. Can Tado accomplish this?