-
Comfort setting rather than temperature
As an option, why do we need to set a temperature at all? Why don't we set air comfort instead. I really couldn't care what the temperature is per room, the figure is irrelevant to me, I just want it to be "pleasant" in each room. Given the temperature to achieve "pleasant" can change depending on humidity etc it would be…
-
Extend open window time
Is it possibile to extend or to modify the open window time? So when you are doing the spring cleaning or leaving the window open due fry smell (in the kitchen) leaving longer then 15 minutes? And having a smooth warm up after the windows are closes
-
Heat transfer profiles to choose from
My old Honeywell thermostat had 4 profiles I could choose from. Each profile represented a different type of heat transfer speed. For example, hot air heating is a quick heating method. Convector heating a slower one. Both have their cons and pros. What currently happens is that when you use the Tado thermostat for hot…
-
Cylinder, stat
Hi does anyone know if there will be a Tado cylinder stat in development?
-
Diffret status for thermostats that are not linked to a zone
In order to stop a room calling for heat and switching on the boiler (like a toilet, closet etc) you can remove the zone controller for the room. It would be good to acknoladge this on the tile in the app.. currently regardless of the zone set for the room it will say "heating to" i think the rooms that are assigned a zone…
-
Date scheduling
Hi, it will be a great opportunity to be able to schedule from starting date and end date, please. The away option is not an option I like to use because off security. What will happen if some one hack my Tado account, and they have full information that I am away. So please add the option to scheduling from starting date…
-
Add detailed status info to tado app for Wireless Receiver connection problems
I recently reported that the wireless link and error LEDs on my Wireless Receiver were often flashing together to indicate a lost connection. tado support said they have access to detailed connection status information with date / time of error events. This type of data would be very useful for us customers to help…
-
Add Zone Control switching to schedule . . .
It would be useful if the zone controller / non zone controller switch could be made a feature of the schedule. There are times here when I’d like to heat a room individually (because no other rooms are on then and it needs to be able to call for heat) but for all it’s other “sessions” the rest of the house is being heated…
-
[Released] Launch an external temperature sensor for the Smart Radiator Thermostats
I'm very happy with Tado overall, apart from the performance of the Tado Smart Radiator Thermostats. I’m finding that due to the way the Tado Smart Radiator Thermostats work, they heat up a room very, very slowly, and sometimes fail to get a room anywhere near the desired temperature. I've noticed that after they turn on…
-
WiFi 6 capability/upgrade
Hi with 3 floors to my house the wireless capability to speak to a single bridge may be causing issues for me. Is there a solution that provides far. Ore effective wifi6 capability or comparability with a wifi6mesh network? TIA
-
schedules that can be assigned to week numbers (for co-parenting)
When faced with co parenting, kids are typically away for a week and the next week they're back. During the off weeks, no heating in their rooms and their bathroom is required and that cost can be saved. In vacation time this scheduling can change, for example two weeks of and then back. So having the ability to make two…
-
Open window toggle
Can we add in the option to tell a thermostat that you’ve opened a window. Many times a window might be open but it’s not detected and as the temperature drops the heating kicks in. Currently if I open a window I have to lower the thermostat so it doesn’t kick in but if I could just switch it to open window so the…
-
Keep the radiator valve open for a while after the temperature has been reached.
So the smart thermostat button works like this. You set a temperature like 20 degrees. However the room is19 degrees. Tado turns the valve of the radiator open and your central heating boiler starts heating. However after the temperature has been reached, Tado gives a stop signal but immetiately shuts down the radiator…
-
Redundancy in the event of internet loss of server faults
Currently Tado does not have an effective method of controlling their system locally if the internet goes down or if their is a fault on their servers. Can tado re assess this and provide a way to still use the heating controller locally via a smart phone connected to the same WIFI network as the Tado devices, so that in…
-
Tado Smart App - Learn function
I would embrace a Learn function in the App, where I could point my original AC remote to the Tado-device, to "Learn" functions available in the original remote, i.e. Silent Mode, Swing, Defrost mode, Timer Set etc. To use these Learnt functions I suggest to be able to have custom buttons on the Tado App Home screen.
-
Valve pin position indicator
My Bosch system which I got rid of in favor of Tado included in the app a place where you could see the position of the valve pin. This was useful to determine if TRV was fully opening or closing the valve pin and other temperature issues. I think this would be useful on the Tado system as well
-
Antifreeze & déactivation possibilty
Hello, Support told me that it s not possible to deactivate or change the antofreeze temperature. The minimum temperature when you set to off is 5°C. I would like to be abble to set the antifreeze temperature at a temperature below 5°C (as set by default). And also to be abble to deactivate completely a radiator head. This…
-
dealing better with low battery: add a new battery state "yellow"
i have noticed a couple times that i get a tado e-mail that a device needs new batteries but when i look at the app it will show a green battery icon and "good" the cause is, i think: during a cold night the batteries have lower capacity and the e-mail get sent. the app will also show a red icon when looked at right after…
-
Relative units in Energy IQ setup
In residential buildings there are still some individual radiator meters. In the Energy IQ setup one can only give kWh or m3 as unit but this is only available on a building level. Can something be done to use individual meter readings from Techem meters for example?
-
UK Customer Service Telephone Number
Currently no UK customer service telephone number is available. This is not good for Elderly people who are less technically endowed then other generations and when they have a fault just want to speak to someone to get the fault rectified especially in the Middle of a UK winter. It causes allot of anxiety. Given the…
-
Settings after signal loss and auto-reconnect
Regarding the wireless receiver of the central heating, it is undesirable for it to remain on when there is no signal. I have returned several times to a home with tropical temperatures after the signal was lossed for unknown reason (so far) and the heater remains (last setting before disconnection). Can't this be set to…
-
Data export
Please allow download of chart data for each room. This would be most useful as a CSV file. Data available should include date/time, actual room temp, demand temp (what the heating has been set to), humidity, open window detection, etc. I would like to be able to analyse my own data, and be able to make easier comparisons…
-
Switching between Zone Controller and No Zone Controller/ Universal Switch
Please could you incorporate a universal switch for Zone Controller, so that the user could switch all his TRVs to "No zone controller" and back to the specific Zone Controller with a single toggle button? Currently, it's really annoying having to go to Settings -- Rooms & Devices -- The name of a TRV -- scroll to the very…
-
Open mode
I suggest to incorporate to smart radiator thermostat the possibility of allowing the valve to remain open, even if it exceeds 25 degrees
-
Matter…Thread
a few month later nothing new ? I don’t want to buy dead products…
-
Wireless Internet Bridge
This is a super simple idea, and franky it surprises me you haven't done this yet (or have you?), but wouldn't it make sense to have an alternative do the Internet bridge with a wireless antena? I have my home fairly well covered with a mesh wireless connection, but the fact that you need to have all radiators connected…
-
Monitoraggio finestre aperte
In Tado non esiste un report relativo al monitoraggio delle finestre aperte durante la giornata. Propongo, se possibile e non troppo oneroso, di inserire questa nuova funzionalità che ci dica: - tutte le stanze in cui si è verificato il rilevamento con gli orari - quante volte in quella stanza si è verificato - le…
-
Show end time while editing the duration of a heating override in the tado (web)app
When temporarily overriding the heating schema (e.g. I temporarily want to heat up a specific room), I can choose for how much time I want this override. However, I typically want to directly see at what time this override will stop, not only how long it takes. So basically, when setting the duration of the override, it…
-
Battery Warning TRV
Can you please provide a warning when battery low. At present a warning is given and TRV has already failed. Please give a warning earlier before the trv fails
-
thermostat mode
Hello, the choice to eliminate the possibility of setting the operating mode on the thermostat (legacy mode) to turn off the air conditioner "manually" is wrong; it was a very useful option.