-
[Released] Develop a "basic backup schedule" mode for when Tado outage or loss of internet
EDIT [15. 01.25]: Offline Scheedule can be requested by community members here Original post: When Tado devices lose access to the Tado servers, either due to a Tado server outage (as has occured a few times), or due to temporary internet issues at the property, the Smart Radiator Valves effectively stick in their current…
-
Plot all rooms on same graph
Perhaps with selectors to show/hide rooms. Would be great to see the interaction between temperatures!
-
Controlling heat pump for heating and cooling
By now more and more owners adopt air-water heat pumps to heat and cool their houses by water plumbing under the pavement, so saving energy respect to other solution. What is of paramount importance given the present surge of energy prices. Yet so far Tado has no solution for this configuration, notwithstanding it would…
-
Priority/importance levels.
I'd like some rooms (i.e. bathroom) to stay at some temperature over night but I don't mind if they are slightly more off the set temperature and I don't want boiler to fire up just for that room. It could be heated up when other room (i.e. master bedroom) needs to turn boiler on. Something like the temperature set to 'no…
-
Back gesture in app
Navigation in the app would be hugely improved by enabling the normal swipe gesture to go back (on iOS, but probably the same on Android). The software back button is at the top left of the screen which I find awkward to tap.
-
Moved: proefperiode Auto-assist V3+
This discussion has been moved.
-
Merged: Radiator Thermostat in Black
This discussion has been merged.
-
Black radiatorknob
I would like a Black radiatorknob on my Black bathroomradiator. I think it is strenge that is not available when a Black radiator is very common these days.
-
Comfort screen settings
Ability change the comfort range and set a min/max in the comfort toggle
-
Remove 10 room limit
I don’t live in a castle, but I exceeded the 10 room limit. So one room could not control the boiler after adding a temperature sensor to the room. Was ok before. To get round it I had to group two rooms together. Not ideal. I don’t see why 10 is a limit. Can’t Tado increase that please.
-
Co-ordinated Early Start
Early start is a fine idea to take some of the guesswork out of when your heating should come on each day. However, for condensing boilers and multi-zoned Tado setups, there's an efficiency issue, especially when setup with modulating/bus connection to the boiler. Specifically, even rooms with the same 'start' time, early…
-
Heat Pump Optimizer - hot water heating only once a day during cheapest hour
My hot water boiler usually only needs to be heated once a day, thanks to its good insulation. However, the current hot water optimizer heats the water during a set period, which isn’t always efficient. Although you can adjust the heating duration, it might not align with the cheapest energy hour if it’s preset in the…
-
Battery last changed
Hi - Please can you add a feature which records when the battery was last changed? Thanks
-
Which Room is Requesting Heat
Tado is full of so many great functions it's hard to debug your setup when fine tuning your settings. It would ge great to see a page that shows which rooms (that are assigned to the boiler) are actually requesting heat - knowing what the system is doing and not assuming what is occurring. This would support my efforts in…
-
Air Conditioning control based on dynamic energy price
Hello. For heating my home I use 3 Air Conditioning units in heat pump mode. I will soon move to a dynamic energy contract, where the costs of electricity varies per hour, depending on the energy market price. It would be very helpful to have TADO assistant adjusting the heating depending on the energy price, so that when…
-
Merged: Option to set thermostat valve always open
This discussion has been merged.
-
Smart AC Control to turn off AC unit when desired temperature is reached
Could it be possible to add a feature to the Smart AC Control that would allow for AC unit to turn off automatically when the desired temperature is reached, and then, when the Smart AC control detects that the temperature has raised 0.5-1 degrees over, to turn on the AC unit again? At the present moment, using the Smart…
-
Always show temperature on Tado ac
Have an option to set Tado ac to always show the current room temperature on display.
-
intelligent program depending on the outside temperature for AC and boiler with termistat
hi, I don't understand why it's not implemented. A intelligent program would be based on the outside temperature to determine whether the air conditioning or heating intelligent program should be activated. For example if outside temperature >= 25, activate the intelligent air conditioner program, if temperature below 18…
-
Merged: Weekly motions
This discussion has been merged.
-
Connessione da rete mobile 4G/5G
Ciao, chiedo se sia possibile poter modificare il firmware/software del Tado in modo da farlo funzionare anche da rete mobile, visto che funziona solo da rete Wi-Fi.
-
Quality issues
The display on my Smart Thermostat has failed after only 3 years. As its out of warranty Tado won't replace it. Having to replace one of the main components of the system every 3 years will make the system very expensive. Extremely disappointed by the Customer Service received from Tado and the quality of their hardware,…
-
External thermometer for tado.
Do taxi make an external thermometer that links in wth the tado app? If they do, I can't find one. It would be very useful if I could remotely monitor the outside temperature as well as the inside temp.
-
Moved: [Feature Request] Informeer gebruikers bij ontkoppelen bridge over risico verliezen abonneme…
This discussion has been moved.
-
Radio signal information
Show information about signal strength between each component and the bridge, so as to have an idea of where to put the bridge to improve the connection with the other components.
-
1hr boost
It would be very helpful to be able to set a timer for boosting a heating zone. Some time I would like to have the heating on either upstairs or downstairs outside the scheduled times. More often than not I set it manually but I always forget to turn it off. Since I have underfloor heating the temperature raises very…
-
Improved status and viewing
I know Tado can look at the background information on which device called for heat. Is there a way that a general log can be created and viewed in the Tado app. So if one room calls from heat and it's shown on a log, if another room detects window open, it still reports on the same log in a time order. Same goes for any…
-
More detailed information I graph 📊
Hi. I wish I could get valve opening in %, in the graph, the 3 heating symbols is not very useful I think. I can see the actual valve opening in % under the care menu, but I can only see it live and not historical data. It will be great if the graph could show opening % :-)
-
Create groups and group schedules
Hi. Previous house had a Hive thermostat and one of the great things was to be able to set a vacation period. You would set an away time and date and temperature and a return time and date. For example you might set all devices to 14C for the week you are away and it returns them to the programmed schedule at the time/date…
-
Spareparts for Tado Smart Radiator Thermostat
Tado Smart Radiator Thermostat is delivered together with a set of plastic adapters to fit different Radiator valves. I use the Danfoss RAVL adapter. This adapter has now been broken 3 times. Tado do not sell the adapters seperately, and they can not tell me where to buy them, So I have now had to buy 3 set Smart Radiator…