-
Spring/Summer and Autumn/Winter settings
Depending on the time of year, I change the temp I want to heat rooms to. So around early April I adjusted things and will do so again in October. It would be useful to have a quicker way to jump between these two settings.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Launch a range extender or upgrade to mesh network
Tado ticks many boxes but it's behind the competition in its lack of signal booster / wireless repeater. I'm unsure whether to take the risk and buy the system for my relatively large stone house given the risk of radio dropouts. If I knew I could add a range extender if required, I'd have the confidence to buy. Perhaps an…
-
Set hot water temperature through HomeKit
HomeKit integration was a main driver for me to choose tado. I don't like being dependent on cloud services for things that are practically local to my house, so I have configured HomeAssistant to use it through the HomeKit integration. However, after installing it, I found out that there is an important feature that is…
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
Smart boiler pressure gauge
Please create a smart boiler pressure gauge so that we can view boiler water pressure in the Tado app. I would like to get a notification from the Tado app if water pressure drops too low. Many thanks for your consideration.
-
Heating
Todo app is telling me I’m useing more than I am
-
Google Home Integration for On/Off Hot Water
I have a fairly old boiler with no digital temp control. Tado supports simply turning the hot water on or off. Google Home shows a entry for the hot water but does not allow me to change its state. Tado support told me: "You have the Hot Water tile enabled in your tado° app. However it is a relay ON/OFF control and you can…
-
Make On/Off Controls Available on Home Screen
It would be more convenient if each tile included a basic on/off control to save you having to go into a new screen first. You already display a 'power' icon in the top right of each tile - see attach - make this live so that clicking it actually works. See Tapo smart device app for example where this is already supported
-
One-click hot water control with 'turn off water' and 'resume schedule' button
I use the mobile app to control my central heating and hot water system. I don't use geofencing as my wife often leaves her phone at home. I do however frequently use the option to 'Turn OFF all rooms' and then 'Resume schedule' later. I would really love a similar option to 'Turn OFF hot water' and then resume the hot…
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
Introducing myself
As suggested by @samd, I am making a short post to introduce myself as the community forum’s new admin. Hello! My name is Emcee, I live in Munich, Germany and am a member of tado°’s Customer Experience team. I hold a M.Sc. from the Technical University of Munich. My thesis was focused on hydroelectricity. I worked in the…
-
Adding Wireless Thermostat change my zone config - not right to me
I have a number of wired thermostats downstairs all working for about 6 months. Then added a wireless controller and thermostat upstairs. But all the downstairs ones had their zone changed to use the wireless controller as the zone controller and I dont remember saying this was OK, i did set up the pair of controller and…
-
Redesign internet bridge and provide longer cables.
Hello. I would to suggest that: 1. The internet bridge is designed so that the cables come from the top not the bottom of the device. This would allow the device to stand upright freely away from the wall (2 requirements for best placement) 2. I would also like longer cables to be provided for the internet bridge - the…
-
Remove the 10 room limit from the controller
Please remove or increase the 10-room limit from the controller. I have to group rooms together to make my system work which is not ideal.
-
Vertical Radiator - Towel Rails - Smart Thermostat interface
In modern houses, we now find a lot of vertical radiators - they are space savers and also act as features. In my home, I have three vertical radiators I cannot interface TADO with, its frustrating as I cannot control these rooms/areas as I can with the rest of the house. Can TADO review the interfaces and advise of a…
-
Apple Carplay / Android Auto
Develop a very simple Apple Carplay / Android Auto interface to allow basic control. e.g "Resume Schedule All Rooms" "Turn Off All Rooms" "Boost Heating All Rooms". The geofencing doesn't work well for me and this would be a good alternative.
-
A manually set temperature overrides the schedule. Let us know here if you don’t want this
I raised the following with Tado: If you indicate by geofencing that you are not at home, the heating will stop according to schedule, but not by manual settings. In other words, if you manually set the heating higher than according to the schedule and then leave, the heating will remain on. I find this very impractical…
-
Firmware update to include EMS2 support
Having upgraded my boiler to a greenstar 4000 30kW, I am disappointed to find out that tado cannot connect digitally, only via relay. There will be a lot of customers facing the same issue and this should be set as a priority to be resolved as I can’t imagine a firmware update to include the new language being too…
-
Plasma Quad Mitsubishi
Hola, tengo un aire acondicionado Mitsubishi MSZ-AY42VGKP y este lleva incluido Plasma Quad que es como un purificador de aire. Este se pueda activar/desactivar desde el mando a distancia original pero al sincronizar Tado y gestionar el aire acondicionado con vuestro producto no me deja activar el Plasma Quad desde Tado y…
-
Multiple Wireless Underfloor Thermostats
Having moved from a single heating zone house with Tado to a new house with multiple heating zones (1 radiators + 4 underfloor) controlled by a Lightwave system. I would dearly love to convert the new house to Tado which is far superior. The only problem is that apparently Tado do not currently support multiple wireless…
-
Heating profiles
Please add a function for multiple profiles for heating schedules based on 1 week of heating schedules being different to another week of heating schedules based on work patterns etc . I know there is the geo fencing function but that relies on people having that opinion turned on. In my experience younger members of the…
-
Integrate wireless thermostat and smart radiator TRVs
My system includes one wireless thermostat in a family room, plus smart radiator TRVs in bedrooms, hallway, dining room and lounge. I’m trying to decide which room is best for the wireless thermostat and the TRVs. Should the wireless thermostat be in the warmest room without a TRV, in the coldest room without a TRV, or in…
-
Toshiba/ others Pure addition in V3+
Many AC's have nowadays this PURE functionally which uses plasma to burn small particles in the air. Would it be possible to enable this funtion in TADO V3+. It's very irritating since I cannot use this at all. If I enable it in my remote then every time I swicth any setting s from TADO this PURE function gets off. I know…
-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Return to previous state at end of Manual Control session
If a Manual session is set and everything was set to off previously then at the end of the Manual session then it should all switch back to being off rather than switching to Smart Schedule. This currently seems like a major oversight and is misleading to users as it does not do as people would expect it to work. If the…
-
Hot Water Catch Up
Hi One issue is that when the geofencing controls the hot water, and you are out for the day and your scheduled timings are not done, you come home to no hot water :( It would be great if there can be a setting for a 'Hot Water Catch Up' that would identify if a hot water schedule has been missed, and Geofencing identifies…
-
Heat release valves
If there would be an option on valves to setup not to close the circuit when reaching the heating point, just send the end signal to the themrostat, then there should be circuits where the remaining heat should release and this extra heat could be useful in bathrooms or other higher heet needed rooms.
-
Support for multiple tado installations linked to 1 account
Please can we have proper support to enable management and control of multiple tado installations via the one account/email I stay at several locations and manage others as a landlord. When email notifications arrive they do not indicated which home they are for. Logging in/out of multiple accounts is awkward when you want…
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?