-
Combining Smart Controls in one room .. making one master.
help ... New to all this. set up smart control valves on both rads in big attic space ... seems to think they are each in separate room .. how do I combine and make one of them the master ? hekp appreciated. james
-
Tado Wireless Receiver UK vs. EU vs. Extension Kit
Hi guys, If you want to have control of hot water (via a separate "zone") is it correct to say the following: UK Wireless Receiver - YES can control hot water but can only have 230v switched or 24v RT and NO Digital/BUS connection? EU Wireless Receiver - NO cannot control hot water but YES to Digital/BUS (plus supports…
-
Smart Radiator Thermostat doesn't upgrade
Hi, My Smart Radiator Thermostat is still on Firmware: 54.12. The others are all on Firmware: 79.1. I've installed the Thermostat about a month ago. Reset, re-joined... No change Is there a way to force the upgrade?
-
District heating : Danfoss with single coil
I am having district heating and i have old Danfoss thermostat knob. I moved to this house recently. I want to replace this with tado. I see there is only one coil connected to the current thermostat. I have attached the pictures below. It is strange for me . How can we connect tado to this system.
-
button "Absent" in app not working
In the app, under "Geolocation" I have 2 buttons: "HOME" and "ABSENT". Clicking "Absent" seems not be working, since when I came back home and looked on the map I saw that heating has been on twice .
-
Installed but no heating
Last night I installed at my mother in laws house the V2 bridge and smart thermostat and extension kit replacing her current wireless thermostat and replaced the wireless receiver with the extension kit , I inputted details of wireless receiver into app and followed installation instructions and only had to move one wire…
-
Help with my set up
Hello all , I have been a tado user for years so I thought I would put it in the mother in laws home , connected bridge V2 and smart thermostat along with extension kit to replace her wireless thermostat , followed instructions and all I had to do was swap a cable from terminal 3 to 4 in the extension kit and use same back…
-
Help with my set up
:# Hello all , I have been a tado user for years so I thought I would put it in the mother in laws home , connected bridge V2 and smart thermostat along with extension kit to replace her wireless thermostat and receiver , I followed instructions on app and all I had to do was swap a cable from terminal 3 to 4 on back plate…
-
Can't a TVR with no user control attached be designed that is sold to be linked to room thermostate
Why not design a TVR operated solely from the room stat. This would take away all these problems with incorrect temperature sensing. And should be considerably cheaper.
-
Enable Opentherm options with Extension Kit
Instructions for enabling Opentherm with a Smart Thermostat show how to enable this using the installer menu: https://www.tado.com/start/manuals/st/Extension%20Kit%20Manual%20-%20Low%20Voltage%20Digital%20Installations.pdf But how is it enabled for the extension kit? I only have Smart TRVs and an extension kit so I need a…
-
App
Hi. I've had the system installed today and have the app on my phone. Can the others in my house hold also load the app and use in the same way as I do? Thanks
-
Several Rooms Grouped as a Single Tado Room
I have 21 Tado thermostatic valves so that every room in my house has a valve. However Tado only allows for 10 rooms so I have to group several actual rooms together as a single Tado virtual room. My loft has 2 bedrooms and 2 bathrooms each with their own Tado radiator valve, but they are all in a single Tado virtual room…
-
Preheat Before Arrival and working close to home
I understand the idea behind Preheat Before Arrival, but I need to understand some details because I am struggling to make it work in conjunction with a house member who works relatively close to home. From the graphic in the Smart Schedule Away settings, it appears that Eco, Balance and Comfort steadily increase the…
-
Temperatur Sensor
Hallo, ich habe aktuell für mein wohn- und Schlafzimmer Smart Thermostate und ein Temperatursensor. Nun habe ich mich gefragt ob ich zusätzlich einen der Smart Thermostate in einem Raum deklarieren kann, sodass ich einen Zeitplan nur für einen erstellen kann
-
Did not put the boiler name, and now the heating is not good. Do i need to restart the installing
Was never asked the boiler brand during the installation only the previous control unit brand. The heating is not adequate or rather low, so is this the reason for not adding the boiler brand?
-
Internet Bridge not powering up
Hi guys. My Bridge is not powering up. I’ve tried changing the power lead and plug (I know they work) but still no joy. I’ve contacted Tado support but it’s been 3 days now. Any suggestions???
-
Therma 3 way system
Hi all, we have a system identical to what is described here: https://community.tado.com/en-gb/discussion/5198/am-i-missing-something-with-trv-setup? I can't see any replies other than what Nick has said, so I'm wondering what extra I might need to buy to make it work with that setup? Will Tado work easily? I can't find…
-
Am I missing something with TRV setup
Hi, I had a tado setup with my last house with 2 wireless thermostats, bridge and extension kit which was awesome. I've since moved and the new property has a 3 way timer (2 heating zones and hot water) so been told only option is TRV (17 of them) and would need to control HW manually through the existing timer. To see how…
-
Anyone else Locked out this morning?
Had to find my details; sign in and then 'claim' my phone. Never happened before.
-
Smart Thermostat not switching off
Hi, i recently installed a Smart Thermostat V3 downstairs in my home. Works really well and i have linked it apple home and can use either app to control it. I decided to add a secondary smart thermostat to my upstairs heating circuit. It’s all connected and the temperature can be controlled remotely, at least on the…
-
For some reason I can’t edit or delete my smart schedule any ideas?
I can go into each day change the temp and toggle heating on/off but can’t edit times. I can also add another time block but once added can’t edit times. The only reason I put smart schedule is because during the middle of the night frost protection goes on even though I haven’t told tado to turn the heating off.
-
Use with existing timer/controller
Had a new Ideal boiler fitted and opted for a tado room thermostat with thermostats on most radiators. I have set the wireless room thermostat to control everything, but then added thermostats to radiators. They all operate independently, but I am worried that the room stat is being over-ridden by the old timer. How should…
-
[User Feedback Request] Quick Actions - Boost Heating
Hello! As you may know we recently launched Quick Actions as a beta feature (You can try it on my.tado.com). We’d like to receive some more feedback on the “Boost Heating” Quick Action, an action that currently heats up all rooms to 25° for 30 minutes. We learned that some of our users would like to change the temperature…
-
Bridge not powering up
Hi guys. My Bridge is not powering up. I’ve tried changing the power lead and plug (I know they work) but still no joy. I’ve contacted Tado support but it’s been 3 days now. Any suggestions???
-
Boiler doesn't fire after simultaneous demand for heating and hot water
Let me explain the setup I have and what's happening. We have a Vaillant EcoTec boiler and a hot water cylinder. There's a Honeywell controller with a valve that controls whether the hot water from the boiler is running through the rads, the cylinder or both. So, all our hot water is pre-heated and stored in the cylinder.…
-
Understanding Weather Adaptation?
Hi, I have 3 radiators in a 62 square meeter apartment. All radiators is next to windows and there are no other thermostat in my apartment, I've got Weather Adaptation enabled. But I have a hard time understand how it actually works, all of my radiators are set to 18C without any "Smart Schedule"., they all measure 22C. MY…
-
Opentherm during an internet outage
What happens to modulation during an internet outage? Is modulation calculated locally or remotely? I noticed there is a longer delay between a request for heat and boiler starting when using Opentherm compared to relay. Wonder if this is due to remote calculations?
-
Leg adapter
Hello Somebody needed to mount a "leg adapter" for the TRV (see images), I cannot find it online. The one I have from my previous valves is not valid for Tado TRV. Did you buy a similar one valid for Tado TRV?
-
TRV Body (M30 x 1.5)
Hi all, I'm looking for links to the good quality TRV bodies. I need to overhaul 13 radiators from standard tap style valves but I can't find correct matches. Preferably don't want to add adapters so looking for the prescribed M30 x 15mm size. Based in Ireland FWIW. (i.e. found this on amazon, but it doesn't state size:…
-
Re: Gestire 2 impianti con lo stesso account