-
Room temperature sensor/thermostat
Hi I seem to be going through AAA battery’s really quickly in my room thermostat. Last ones only lasted around 5 weeks and were Duracell. Any help apreciated.
-
Does adding extra Wireless Temperature Sensors need Tado support to be involved?
in the past when adding “smart” thermostats I’ve had to contact Tado support and wait several days for them to be added. as I already have 5 smart thermostats installed, if I want to add 2 more temperature sensors (probably takes me to 25 devices), do I need to go via support?
-
Confused about starter kits
Hi - planning to put Tado in when we extend the house shortly and start from scratch with heating system. Any help on what parts I need would be great: Heating will hopefully be an air-source heat pump if we can make the budget work, otherwise probably a combi boiler. Either way I'll need a device to provide relay closure…
-
Wiring for Greenstar 30 cdi
Tado receiver , the app and thermostat are talking to each other but no responses from the boiler. The boiler is currently working with a wireless Digisat optimiser T45 , does anyone know how to connect the receiver and disconnect the T45?
-
Hot water control disappeared
I’ve just noticed that I can no longer control my hot water with my tado app - it just doesn’t appear anymore. I’ve had tado for years and always used to be able - but support tell me if it did used to appear it never actually did anything! I have a Viessmann Vitodens 200-W boiler with a Vitotronic 200 H01A controller and…
-
tado stand accessory isn't compatible with tado Smart AC Control
The stand accessory is marketed as compatible product, there is manual entry how to use it with ac control and it is sold by some retailers as bundle. Despite that it obviously not designed to work with Smart AC Control - if you put it the way suggested in the manual the device will fall off from the stand every time you…
-
Extension kit needs to be kept loose for it to work
I have had anrw boiler installed, the vaillant ecotec + 637. The extension kit was relocated in the process of the Install. However the kit only has power if I don't push the cover onto the wall mount base. If I push the outer part of the extension kit to sit flush to the wall I lose power to the extension kit. Any…
-
help with internet box
hello all i have a tado box that plugs into my router and has a usb cable on the tado box which seems to power the unit, on my new router there is no usb point , what do i do please to make it work thanks adam
-
New smart radiator thermostat dead
Hi there. Just bought a 4 set smart radiator thermostat to extend my home installation. 3 worked perfectly on set-up (even though the original batteries were very low on charge - shelf-life?) but the 4th one refuses to react when I put batteries in. Using recommended AA 1,5V batteries and nothing, no light, no movement,…
-
Email notifications for discussions I've participated in
I flagged a comment as spam (and I note other people have done so as well, yet it's *still there*) and this is causing me to get email notifications every time somebody replies to the thread. That seems to be a rather non-useful definition of "participated in" — if someone's made a spam post, I don't want to know every…
-
digital ebus boiler control and tado hot water control with regular boiler ?
Quick question regarding a boiler upgrade and if anyone knows if the statement in my title is possible? At present I'm using a regular boiler and relay (on-off) control via wired tado room thermostat directly connected to a 2 channel programmer on a Y-plan system with a hot water cylinder. I have also a number of tado TRVs…
-
app.tado.com completely blank!
Suddenly when I go to https://app.tado.com/, the page is completely blank. Why is that? I have tried logging out and in again. I have tried in Chrome, Safari, and Firefox. I have disabled adblockers. I have cleared cookies. Nothing helps. It worked ealier today but not now. The app on my iPhone and iPad still work…
-
No Remote Access
The attached screen shot is what my Tado app looks like... most day. Connection is to Tado's server is lost on a VERY regular basis. The Tado bridge is connected directly to my router. Yet connection is constantly lost. Most of the time, unplugging the Tado bridge power and reconnecting restore service. Not tonight.…
-
Selling Tado System
If I sell Tado system what do I have to do or set up so the new owner will be able to setup from the start. Thanks for help.
-
Connection dropping
New tado fitted 2 weeks ago todate working fine but today my connection from my app to the server keeps dropping and app does not open. I deleted and reinstalled app twice. Both times the app the opened but dropped again. Internet bridge has all lights lit. Help please
-
Does the original remote get used after Tado is setup??
I have a room with 2 levels which has a Daikin mini split on the upper level and cools both levels. I was thinking after I setup I could keep the Tado remote on one level and the original mini split controller on the other. Would that work, or are you not supposed to use the original mini split controller anymore once the…
-
First move into smart home device
I've not taken the plunge with smart devices for home automation, but I am hoping that will change soon! I am in the UK, and have a Vaillant ecotec Pro 24 (combi), with a single thermostat (programmable) for heating. I'm initially just looking at tado (wired) as a straight swap, literally to turn on/off on demand, just…
-
can i connect a Tado rad valve and use a wireless Thermostat to turn the valve -underfloor heating
Can i connect a Tado rad valve to turn the underfloor heating on and off using a wirless Zone controller to turn the valve on of off? The Rad valve will just be used to Open or Close the Valve. This is adding to my existing home Tado setup. All rooms have a Tado rad valve these tell the living room thermostat to turn the…
-
Danfloss tp-one to extension kit help
Looking for some help on the above.
-
HomeKit Features
Why has Tado° not exposed other key fundamental actions to HomeKit? Actions such as: Fan Speed Flap angles Current Temperature Current Humidity The ability to only change temp, on and off does not fully make it smart or replace the need for the remote to be handy. Could Tado° please look into exposing the ability to…
-
Why does Tado only have 4 fan speeds in App
I have noticed that Tado° only has 4 exposed fan speeds in app; Auto, Low, Med and High. My air con has 5 it’s sort of in between Med and High. Is there a way for Tado° to support this 5th speed depending on make and model selected in the setup?
-
Tado App - Heating will not come on, hot water control icon also missing
I had a boiler installed last week along with the Tado smart controls - Internet Bridge, Extension Kit and Smart Thermostat. The app was registered on my phone (Android) and the gas engineer asked me to put the heating on via the app to test it out. All worked fine. During the week, I have lost remote access. I've managed…
-
tado Display
Hi, we're looking to get tado. We have wet underfloor heating though out the house so would be putting a smart thermostat in each room including the bedrooms. My question is "is the tado display on constantly? If so, is it bright in a dark room?" Many thanks
-
Internet Bridge V3+ firmware update and Apple HomeKit
Every time I got a new firmware pushed to my V3+ bridge Tado° becomes unavailable in Apple HomeKit until I hard reset and add the bridge again! Is this common? Thanks
-
Installation/wiring problems with Thermia
Hi, I am trying to install a Smart Thermostat, wired, on the wall. The problem is that I can't find what the four wires from the boiler is representing. It is an Thermia Diplomat Optimal. And the wires are Blue, Blue/White, Brown and Brown/White. Any tips on getting these installed without having the ones who installed the…
-
TRV loosing connection but is not the furthest one
I have recently set up Tado in my home. I have a simple set up with a bridge and 7 TRVs. The Bridge is a V3+ bridge located at the red dot. The green dots represent fully functioning TRVs. The yellow dot is the one causing problems. With problems I mean that it looses the connection repeatedly and sometimes for long…
-
Vaillant 938, Tado and UFH
I currently have a Vaillant 938 boiler and plan to have ufh installed so that a wiring centre controls the actuators for each of the ufh zones and a separate 'zone' for normal radiators for the upstairs central heating. In order to modulate the boiler to deliver the correct heating flow temperature, e.g. 30-50c for ufh and…
-
Thermostats on old firmware
Of the 12 thermostats I have , 2 of them are shiwing they are on older firmware than the rest. 2 of them are on firmware 54.12. The rest are on 86.1. Result is that some featires like the child lock is missing. Can anyone advise how to update the firmware on the thermostats please.....
-
No remote access
Every time I launch the app I always see the message “no remote access”! I only have one internet bridge and the wireless receiver connected to control my hot water. The bridge and the receiver are literally no more than 10ft apart through walls, so what is the issue!? WiFi coverage is exceptional in this part of the house.
-
Junkers Cerastar Comfort
I cant get my Tado to recognice my new boiler unit. And I cant seem to get the Tado to do a factory reset and a new set up rutine. What do I do?