-
Aggiornare APP
sarebbe ora di aggiornare l’app e rendere possibile avere più HOME Utilizzare 2 telefoni o dover uscire dall’app è oltremodo ridicolo e non all’altezza dei vostri ottimi prodotti, nonché una funzione ormai disponibile praticamente in ogni app di allarme e controllo remoto. Credo sia doveroso per il vostro reparto tecnico…
-
More Settings options for AC
Current AC v3 owner... satisfied with the overall experience. As others have said, display could be showing lots more. Controls could be a little easier/more intuitive and Humidity could be visible to the Home app as a tile. Ideally, the device could be receiving the "dumb" remote signals to update its status as well. But…
-
Vaillant VR66 compatibility
Tado was compatible with the discontinued VR65. It would be very helpful if you could make it work with the current VR66 model.
-
Honour Schedule While Offline
My Tado keeps disconnecting from the internet (the only device on my network with this problem). This means the schedule to power heat for 0630-0700 doesn't come on, meaning no hot water for a shower! 🥶 Could the schedule be pushed locally onto devices which are connected to power, but disconnected from internet?
-
Outdoor sensor
outdoor sensor to track the outside temperature/humidity to help improve the weather adaptation
-
Window opening time
I am asking for the possibility of extending the time of the open window, at least for 3 hours. This longer time is necessary, for example, in a family house, where the humidity in the bathroom needs to be ventilated through the window.
-
add a choice between 0,1 OR 0,5 degreechange in the app
I disagree with only 0,5 change. I bought a Tado for its flexibility with 0,1 degree changing. Now it is 0,5. Why nog helping both with a choicepossibility in the app: 0,1 OR 0,5.
-
Ability to add notes to statistics graphs
Just had a thought regarding the temperature graphs. It would be nice to be able to add notes to it, to better understand how our actions impact the temperature in the house, and/or heating use. This could be things like manually adding when windows were opened (if not detected automatically), or when hot appliances were…
-
Range Extender
We live in a 4 stories house with a lot of concrete. The Bridge is only able to reach 3 stories, on the 4 floor does the signal often go away and the device is offline.
-
Exterior weather monitor
I would like to have my own external weather monitor that could feed directly into tado to give a more accurate picture. Along with more interesting stats - probably.
-
App emergency push notification when bridge connection goes down
When Tado bridge loses connection with the cloud, and thus the mobile app please can the app push a notification to alert the phone user that something has gone bad with the Tado install so that we can fix it ASAP. Examples being no hot water or heating stuck in ON mode if the disconnection has happened whilst asleep.…
-
App feature: faster on/off using the main screen tile
I've been doing a lot of manual adjusting of my ACs the last couple of days to figure out what is a nice temperature and what isn't. And so I hit upon an idea which could improve the app: In the app we have tiles for each room. It would be a nice feature if by performing a hold-button action (for say 3 seconds) on the tile…
-
Official plugin for Elgato Stream Deck
Please create an official plugin for the Elgato Stream Deck. This would allow us to control our thermostat directly from the Stream Deck. There are unofficial plugins out there but they ask for direct entry of our tado username and password and this is a security risk. An official trusted plugin would be great. Thanks
-
Display Control for thermostat
It’s “Nice” having a white square that does nothing until you press the button, but surely having the ability to control the interface so that it could be configured to be “always On” (battery drain warning) or to display the current temperature / air quality for “X” seconds every “Y” minutes would be great
-
Allow access to DIY install instructions pre-purchase
Trying to get confidence to buy a TADO wireless receiver is hampered by the lack of supported boiler makes and models listed on the website. I have a Vokera Vision 30c. When you click on 'other' you get stuck in a loop of faqs returning you to the product finder. You need to send an email and wait for a reply (not long). I…
-
feature change to allow for heating season to be off or on
So, I have had this for less than a year, the app doesnt seem to have a setting to tell the goefencing its summer and so doesn't need to worry about the heating system and being away. If I switch to away mode to avoid the prompts it just prompts to say I'm back. I appreciate that someone my have air con controlled by the…
-
Smart AC offset to outside temperature
With the crazy heatwave happening these past few days I had some issues with my Smart AC schedule. Normally I keep it set to cool the room to 24°Celsius as that gives me a good enough temperature during more normal days. But now with the heatwave reaching temps of 35° and higher setting the AC to 24° makes the room feel…
-
2 Bridges
Can you have 2 bridges. I will have 2 zones can each one connect to its own bridge. I have a big house and connection is unreliable with one bridge. Thanks John
-
No per month charge for automation (auto-assist) l
I do understand why push-notificatioms are free, but not why auto-assist is not. It seems like an important feature that should be included when Tado sells their products as automation and smart products. Why do I have to pay per month after I have bought the product? It kind of eats into the money (I might have) saved on…
-
Temperature history and alarms
I would like to suggest a graph per Tado thermostat so I can follow up the change in temperature for instance during the night. Also an alarm function that notifies me when a thermostat goes lower or higher than the set temperature (1) and an alarm that notifies me when the thermostat goes the other way than the set…
-
UI Fix - Start/End times field text is cut off
Currently in the app, the time in the start/end time the time is not displayed fully.
-
Invite users only for geofencing
Hi, It could be a good idea to invite people on the app only for geofencing (right management or another app only for this usage?). My kids are at home from time to time between school sessions and i need geofencing to heat up the home when they come back. But i don't want my kids to play with tado settings. "Oh, it's cold…
-
Only 24h? Make multiple timespans in the heating history graph
Right now you can only see a graph of the current 24 hours of room temp and heating in the graph window found under each rooms control menu. Would be a help to se 1day, 2days, 3days, 7days and 1month And it would be great to see a graph of the average usage per month in a year, also with average inside and outside temps,…
-
Revert timer defaults back to the previous functionality
When manually turning on the hot water in the app, instead of defaulting to the same duration as the last request (e.g. 30 mins), it now defaults to staying turned on until the next scheduled change (which is often hours away). If this is not noticed by the user it can lead to the hot water being heated for hours by…
-
Tip
De app werk weer zoals het moet maar vind deze toch nog beter instelbaar https://app.tado.com/nl/main/home Hooplijk verbeteren ze die app Ook
-
Local API
Add an API server to the internet bridge (even if it requires newer, more powerful hardware) that supports controlling devices within the local network. Philips Hue provide a great example of how it can be achieved. My justification is twofold. Firstly, a local API can be accessed in the event of my internet going down.…
-
Small change to "Boost Heat all Rooms."
During the summer I use the "Boost Heat all Rooms" quick action to activate the heating once a week to keep the pipes clear and exercise the thermostatic valves. It works fine but at the end of the boost period it returns the system to the schedule rather than the state it was in before boost was pressed which, in this…
-
If at least 1 connected device is available in a room, to read and control from that
1) in a rooms settings and you select the measuring device. If that is connected then don’t grey out the room, put a red spot to indicate one of the devices has an issue. Allowing you to control the room still as and when the others connect they sync 2) energyIQ data source and units. Can we add litres for oil consumption ?
-
Disable away mode notifications when heating is off
The away mode notifications work well for me, however they don’t make any sense when the heating is off. So the weather is warm, I’ve turned the heating off, but I still get an away mode notification every time I leave the house. Any reason these couldn’t be disabled automatically while the heating is off?
-
Battery Power for AC control rather than mains plug and 1.8m lead
I have AC in bedrooms and the your smart AC control would be an attractive convenient addition to my smart heating intallation. It would be much neater to have these powered by batteries as opposed to a mains plug with 1.8m lead trailing up a wall which is very unsightly and severely limits placement options Look forward…