-
Report all disconnections/failures clearly in the app
Some device disconnections/failures will immediately show in the app via a change in the icon for the relevant room and changes to the reporting in the climate chart. However other devices are for some reason set up to fail quietly. For example an extension kit controlling the boiler can disconnect and the user will not…
-
Hot water not working? You need the room temperature sensor
I have just set up a tado system for my elderly mother. She has only 4 radiators and a hot water tank in a Y-plan configuration. I put smart TRVs on the radiators and they were working to plan, but the hot water did not work. The wifi receiver seemed to be refusing to configure to the Y-plan, reverting constantly to a…
-
Way to manually signalize open windows
Hi, I've noticed, that sometimes the App does not catch the fact that the windows are opened. I'm not surprise, because during relatively mild spring or autumn days the temperature outside may not differ that much from the inside, and as result the change in temperature may not be that dramatic for algorithm to pick it up.…
-
Combine "Smart AC control V3+" with other Tado products
When you allready have a livingroom with several Tado products like the "Starter Kit - Wireless Smart Thermostat V3+" and "Smart Radiator Thermostat V3+", but in the same room also an Airconditioning system, let this all work together. There is allready the product, the "Smart AC control V3+", but i've learned that these…
-
Beta channel
I did sign up to the beta version of the App, and it would be great to be able to: See the a brief list of changes (new features / fixed bugs), so one could look closer and test it Get a button directly in the app, that would allow to provide a feedback in a form of a bug/ticket with few clicks directly from the app Unless…
-
Missing data in web-app
Hi Tado´s I really miss the fact that in your browser app there is access to the same data about operations as in your Google app. When it is found on the mobile, it means that the information has been collected about how the individual thermostats operate, heat, humidity, etc. But in your web app, keg can only see a very…
-
Go back to %%%%%
I have two wireless thermostat sensor And before I could see The percentage of use of each one Now it's got updated with a graphic That doesn't specify each one consumption If it keeps like that I won't renew the annual subscription Before if I spent €100 i could divide the expenses for each sensor now I can't Or can I ?
-
What do you think of this ? Improvements for Time slider for changed schedule
The time slider (see screenshot) is difficult to operate, the the scale is too small. The time changes are therefore not precise. A few ideas (see screenshot edited) Make the slider as big as the temperature slider (vertical) Display the future end time immediately, not when letting go of the slider (eg. +2h 30 min)…
-
Bug/Fix - Alexa Voice Duration Skill Integration, there is an Environment Crisis!
Alexa accepts the instruction "Alexa, turn on my hot water for 1 minute" and then turns on the hot water forever more ! Tado Alexa integration only recognizes the "Alexa, turn on my hot water" without the time constraint sub-clause (utterance). No warning, no nothing... Opps - hot water all night!!! - Lots of expensive oil…
-
Early Start Programming
I like this feature but it would be better, and save more money if you could choose which time block it works with. For example I want it first thing in the morning but don't want it for the afternoon starts.
-
Manual Control on tado° device doesn't work.
This used to work, now it doesn't. Timer set to 20 min. Heating on via manual mode. Schedule set to infinity, but should be to 20 min. Also, the app doesn't remember the last state, so every manual setup starts from 'until you resume' mode. ¯\\\_(ツ)\_/¯ Please can this be checked & confirmed if a bug or a feature?
-
Ecran histogramme
Bonjour, j'utilise un smartphone Android . je constate que si l'option "Sombre" est activée pas de Température ni d'heure présentent sur l'écran BàV
-
Widget for iPhone
When you swipe to the right on a iphone, you get your widgets. It would be very handy, when there is a Tado widget available. I cab nmanage sereral home application through the widgets, but for Tado I must perform extra actions.
-
Suggested schedules to save energy
I know this would potentially be a nightmare and long term investment on tado's part but for those with trvs it would be possible, after maybe a year's worth of data from a property to learn a user's preferred temperature, time to heat each room, time for room to cool by X degrees thus understand thermal efficiency of each…
-
Smart AC delayed start
With tado smart AC a schedule can be configured. Although this works fine it would be great if it would be possible to choose a mode, duration and set a delayed start time for the airconditioning. I do not find the smart schedule super useful since I don't have a fixed schedule wherein I use them. Therefore it would be…
-
Temperatura maxima termostato radiador
Hola, sería posible incluir una opción para modificar y reducir la temperatura máxima de 25 grados centígrados que puede seleccionar manualmente en los termostatos del radiador. Es demasiado fácil "girar" el control al máximo. Teniendo en cuenta el deseo de todos para ahorrar energía, sería bueno poder restringir esta…
-
PAYG tariff rates in energy IQ
Pay as you go tariffs often have 2 rates. A higher rate for the first few kwh of energy used, and a reduced rate for any additional usage. For energy iq to give accurate estimates for people on pay as you go tariffs the app needs to be able to be told the full tariff details Ie X £amount for first 2 kwh of usage . Y…
-
Room layout
Hi. I have two thermostates and a temperature sensor in the same room as well as two adjacent rooms with similar setups and mostly opens door between the rooms. If one could define the room layout defining the position of each device, it could potentially help create the best distribution of the heating
-
consumption in kWh
The display of consumption should always be possible in kWh even if measured in m3. The conversion rate varies but typically only changes slowly and by country - and it could be over-ridden by the user if wanted.
-
Current temperature on TRV when in child lock
I was surprised to see that when the Child Lock is set on the Tado TRVs, you can't get the current temperature to show. When you physically touch the unit it shows the target temp but not the current one. It would be really useful if you could add this, as it saves opening the app for the current temp.
-
Merged: Setting the boiler's heating water temperature via the app (just like hot water)
This discussion has been merged.
-
Cleaning Mode
Hi, I was thinking that it would be a good idea to have a cleaning mode toggle in the app that would disable all thermostat radiator valves (or enable the child locks) in 1 go so that temps are not changed during cleaning. Thanks
-
Possible improvements to this forum
Just joined this community group and struggling to know where to post ideas. It might help if this thread (suggestions, ideas and improvements) could be further divided into: Suggestions Interface design ideas (fonts, layout, navigation, terminology, colours etc.) System logic (setting temperatures and programmes etc.)…
-
User-defined temperatures and schedules to speed making changes.
Motivation is to minimise taps and clicks to change room schedules in many real-world scenarios. All of this is just software with no implications for the hardware/electronics. Temperatures: Allow user named temperatures, eg 'Toasty' = 23, 'Warm' = 21, 'Eco' = 19.5, 'Night' = 17, "Away" = 6. These could then be applied by…
-
Energy IQ long free trial for cost of living crisis
Has Tado considered offering an extended free trial for Energy IQ this autumn to help people manage energy use during the cost of living crisis? Something like a 3 month trial would help, and might result in more paying customers long term. Also, is it worth revisiting suggested temperatures from both a climate crisis and…
-
More devices to have a smart home, such as smart sockets
It would be nice to have a single app to control everything, coming from a single brand. instead of buying smart sockets from another brand, or buying another bridge device (e.g.: Philips Hue, or Bosch), it would be nice if Tado also provided these devices. I'd happily buy a smart socket or lamp switches from Tado for…
-
Manually pre-set times for "Away"
I don't use Geofencing as it doesn't work well for our use case (we often have baby sitters over and also we're often at family houses who live on the same street). It would be nice to manually be able to pre-set times for "Away". E.g. Set to Away mode from 13:00 to 17:00 (on my old Honeywell thermostat this was called…
-
Please add the heating intensity to main screen
Please add the heating intensity to main screen.
-
Preheater Control
I was hoping my Tado controller would be able to have some control of the preheater on my boiler. This feature is great for quick hot water but a real energy zapper. I wanted the Tado to activate this feature as part of my scheduled hot water times, first thing, and a few hours early evening, but not active when I am using…
-
Add choice in default setting when battery is dead
When the battery dies on the v3 thermostat the Central heating goes full on. If your not home to notice this in time you might have a big problem, or at least a free sauna. The normally open or normally closed mechanic inside should be changeable. I understand that heating in nordic countries might prefer to have to more…