-
Be clearer about what caused the boiler to turn on
I have 6 smart TRVs and the Tado Thermostat. Most of the TRVs are configured without a zone controller so that they will accept heat if the heating is on, but not turn the heating on. However when they are below the desired temperature the graph shows that the heating was on in the same UI state as when they have a…
-
Wi-Fi Concern
Hello, If the wi-fi goes down in the property, does that mean you are not able to turn on the central heating in the property? If this is the case, I think this needs discussing by your community members, and needs this feature adding to your system. We have friends in rural areas where the wi-fi can be very intermittent,…
-
Activity lights on home page
I would like to see the H/W and C/H lights that are on the wireless programmer mirrored onto the home page of the Tado App. This would allow a quick view of the current status and not take up much space on the Home Screen. It could also be improved if the C/H was red dot for fully on and amber dot for a remote thermostat…
-
Don't limit UK devices!
I bought a tadoº wireless kit last week and have had an absolute nightmare trying to get it set up, not least because of the terrible customer support from tadoº, but also because it has been decided to cripple the functionality of the devices in the UK! After spending £200 on this tadoº kit, I was faced with a prospect of…
-
Stats in the web browser + Fix weather on off toggle button
Hi, Can we have the stats available via the web interface? Also on the stats in the Android App the Outside Weather toggle button is the wrong way round to the Heating on and Humidity button, if you toggle them on whey go grey yet grey on the weather button turns the weather off.
-
Can you not have a Forum for tech issues
The guys at the shop do seem a little under pressure. Keeping a website uncluttered is always good but I’ve just spent (Typ waiting time 30 min.) a significant time trying to get a data sheet/ engineering evaluation of the Rad controllers they don’t appear to have one ( the eng/evl I can understand but the data sheet ) ?…
-
When in thermostat - At desired temp switch to Fan instead of turning unit of
Today the Tado turns the AC of when going outside temp range. It would be better to go over to Fan mode to continue to circulate air
-
Energy IQ calculation behaviour
The calcul for "Hestimate heating consumption" should be include the fix price of a monthly gaz plan. Overwise the amouth in euros can not be correct. Example with the French case: We have a fix price in addition to the volume of gaz they use every month. March, I had to pay 19.30 euros (monthly plan to have access to the…
-
Wi-Fi dropping out - and not communicating with all products in household.
Hi, Not sure if your Tado customers are aware that the problems they are encountering, are quite easily solvable 99 times out of 100. I had the same problem when I installed a Ring door bell, the wi-fi router was at one end of the property and the ring door bell was at the other, and I could not control the Ring door bell…
-
Naming radiators
I have a number of rooms in which I have more than one radiator but all connected under one Tado “room”. It would be good if each individual radiator could be named eg “under the window” so that one knows which battery to replace without having to say Hi to each radiator. This is particularly important when the radiators…
-
Individual geo location feature
Hi, i let out rooms of my house. I want to be able to turn off their thermostats when they are not in the house. So it would be nice there where user management in the app... HIGHLY MISSING!!!
-
Wireless Smart Thermostat
Hello, I would like this feature to be considered by your community members - To be able to turn on all radiators in the property at the touch of a button on the wireless smart thermostat, as you can on the App on a mobile phone/tablet - (Boost Heating All Rooms) - this to me is more convenient. At present the wireless…
-
More than one setting for each room
I have two rooms for which I regularly change the settings. I would like to be able to have two alternative settings for each room so that I can switch between the two and not have to completely reset the room each time.
-
Add undo button to scheduler
It is very easy to make a mistake when designing the schedule which accidentally deletes all the changes you've previously spent time making. Please can you add an undo button to undo whatever you did last. This could go next to the copy paste buttons quite nicely.
-
.set all rooms at same time
Add a button that will reduce the temperature by 1 degrees at every press and another the minus 1 deg. So you can set your complete system up or down at a touch
-
Show energyIQ in GBP
Show consumption costs in GBP in energyIQ
-
Create limits for heating
To create a limit for the heating for when someone is staying over
-
Boost by 5° not up to 25°
I have my heating relatively low but if it dips a few degrees and I want to boost it I don’t want to boost to the maximum 25. 5° more than the current temp would be enough. In this age of trying to be energy efficient and a fuel crisis maxing out the temp is illogical
-
make geofencing free.
I was always surprised that geofencing needed a subscription. When receiving this email below. Geofencing has a much bigger impact. So make geofencing free. "Take action now to reduce energy consumption in a joint effort Hello Robert, Did you know that lowering your home temperature by 1°C will reduce energy consumption by…
-
Unify AC V3+ experience with the rest of the Tado products
Hi, I have multiple Tado products in my home - 5x RTV, 1x Thermostat, 1x Home Bridge, 1x AC controller. The experience across these devices is so different that the AC controller almost feels like it was made by a different company (it is not great). Would it be possible to enable pairing of the AC controller with the Tado…
-
Heat pump simulation mode
With ASHPs being pushed so aggressively in the U.K. and with Tado users likely being on the forefront of heating efficiency, it seems to me that a ‘simulation’ mode would be helpful. The idea would be that tado (when linked to digital connections) would cap the max water temp at 55 deg and ideally target lower temps. It…
-
Graph room switching
It would be great if you could swipe up and down on the daily graphs to see other rooms. Alternatively it would be great if you could overlay different rooms on over each other to compare the temp/heating in different rooms. Currently to look at another room you have to back out, go to the room and reopen the graph. Thanks!
-
zones
hi guys any chance of a feature that allows you to block rooms together. i.e. upstairs/downstairs/bedrooms. you could simply call them zones. if you can and the boost into this aswell so hitting "boost upstairs" would heat everything in your "upstairs" zone. tell me what you think, thanks
-
Set a maximum radiator temperature, to keep the boiler condensing efficiently.
Hi, Tado achieves a lot of its efficiency by modulating the boiler temperature. However, the variability in environmental temperature makes it very difficult to produce a room temperature profile that will not a some point be caught out, resulting in the boiler going to its maximum output temperature for a short period of…
-
Add WPA3 support to AC V3+ Controller
Hi, would it be possible to add support for WPA3 to the Smart AC V3+ controller? This security protocol is becoming the new standard, and right now, at least on my network, it is the only device that doesn't support this protocol. Cheers
-
Extra safety feature
For some reason my Tado heated up to 57c after a change of installation in the setup menu. Therefore I think a check/failsafe in the firmware of the Tado for when the temperature goes up to more then 30c in a short period it should turn itself of and give a notice in the app. It melted My Tado wired where you press to turn…
-
Add Humididty to Climatecomfort screen
Could you add humidity next to C° on the screen ? See screen capture Thx
-
Essential Tado App Improvements
Hi everyone, I have been asked by Tado to post my request that the IQ energy facility within our Tado Apps be updated to include our electricity readings. This because... wait for it, you're not going to believe this... So us Tado Customers can vote on whether this should be included within the App. I can almost hear the…
-
"Advance Heating" Feature
This is a standard feature in most heating systems - some form of control to advance the heating to its next programmed state. Scenario - it's 22:00 and I want to go to bed early and turn the heating off. The heating is programmed to be on until 23:00. Of course if I TURN OFF all rooms that works, but the problem here is…
-
3rd party temperature sensors
It would be a great improvement if one could have the ability to use a temperature sensor already in the room (which is i.e., HomeKit compatible) to control the radiator valves. This will give a much more accurate temperature control in each room. If you already have a temperature sensor in the room used for another…