-
Can we get smaller buttons?
I don't see the point in having to scroll down to see all the rooms, and then all the environmental buttons. It would be great if there could be an option to resize the buttons (e.g. specify how many in each column). Likewise, the quick buttons at the top require horizontal scrolling when again they would be in columns.
-
Confirm boiler shutdown before closing last rad valve
Hi, If the Tado app made sure it turned the boiler off before it closed the last radiator valve then this would allow the whole heating system to have tado valves on each radiator. In our house we have a nursery radiator which comes on regularly through the day and night. Because some radiators don't have thermostats…
-
Show radiator and boiler relay status in app
Hi, I think it would be nice to see the valve position status in the app. Obviously if the set temp is above the actual temp then Tado wants to open the vale, but it would be nice to see the feedback so you have some confirmation that it has happened without needing to be near the valve. The same would be true of the…
-
Introducing: forum members promoted to moderator
You might or might not have noticed this already, but I've recently promoted two experienced forum members to moderator status. More to come. I'm not sure if they want to be named, so I'm leaving that open for now. Moderator rights Moderators can merge, split and move threads, edit comments and a few other rights normal…
-
Notification on Phone when Window is Open
Would it be possible for the Tado app to create a notification pop up on your phone to let you know that a window is open?
-
Create an option for the Radiator Knob to NOT trigger the boiler
For houses with a floor heating system the setup how TADO Thermostat works with the radiator buttons not ideal. If one of the radiator buttons requires the radiator to heat up, this will now trigger the boiler and will then trigger the floor heating as well consuming a lot of unwanted heat. Suggestion is to create an…
-
Fireplace detection
During winter season I regularly use my fireplace, the increasing temperature will soon enough shut off my ac unit (heating). So far so good. I usually set he ac unit in fan mode to help distribute the heat. I’ve tried to automate this without much success. I see no support for this in the Tado app. Since HomeKit does not…
-
Master Temperature Control
I want my whole house to be 18 degrees. I don't want to have to go onto each room
-
Multiple schedules in one room
It would be great to be able to generate different schedules for different devices in the same Room. I have an UFH with wired thermostat and a radiator with RTV in the same physical room. Weekday mornings heat is only needed for one hour, so UFH better stays off. The radiator would be much better controlled by a wall…
-
Water damage / Fire detection
Not directly related to heating management, but will be a great asset: using the sensors available (temperature/humidy) to notify user of probable inprogress water damage (very high humidty) or fire (very high temperature). Would I had received such a notification, this would have greatly reduced the extend of damage that…
-
Introduce a learning ability to Early Start for radiators
Using the data a thermostat picks up about how your house heats and cools, and the time taken to reach/maintain a temperature introduce custom smart start/finish to scheduled events . At least add a 'radiator' version of Early Start.
-
Improve heating algorithm to wind down heating power earlier, to prevent temperature overshooting
In using tado radiator valves and thermostat, I notice they almost always overshoot their intended temperature. That's usually because the heating power will remain at full strength almost until the temperature is reached. It would be better if the algorithm supports earlier wind down of the heating delivered so the…
-
Leave valve open when batteries low
When the batteries go flat, I have found that the heating keeps trying to heat that room, but with the valve closed it won't, so the system either needs to turn that room off or personally I'd rather it leave the valve open so it can heat the room, with the rest of the house.
-
Humidity warning
Hello, I like Tado very much, but I have a new request. The new feature of the air humitity in the rooms is really nice. But what would be very nice is that we get a warning if the humidity in a certain room is too high and if we have to open the window. That would be great! Thanks in advance! Greets from Belgium, Manu
-
Window (No.) open detected
Hi. Hope all is well. Window open dedicated does not tell me which window is open and sometime I am notified even though all my windows are closed. This tells me that draught is somewhat coming in but I don’t know from which window. It would be really helpful to be able to identify which window is open, this is so that one…
-
Temperature adjustment
I wanted to set the actual room temperature on to the radiator thermostat searched everywhere on the app only to find it’s not on the app only the website which seems a bit backward ideally they should mirror each other
-
Recommend a Friend scheme
Following the success of my own tado system, I recommended it to my son who has now installed a full system covering 15 radiators. I contacted Support to enquire as to whether there was a ‘recommend a friend’ scheme that would provide a benefit for me against future purchases, and was told that there wasn’t but it was a…
-
Low Battery Display
Hi would it be possible to show battery status on main menu where all rooms are displayed, this would save going to settings menu to check battery status. Many thanks Stuart
-
Features of the mobile application / Fonctionnalités de l'application mobile
I am a happy new owner of a Tado system with a base kit + 6 thermostatic heads, but I had 3 questions about the mobile application (Android): 1- On the home page of the App (home icon), is it possible to see at a glance if the wireless receiver (connected to my boiler) is in heat demand for one of the different rooms…
-
Early Finish
As we have underfloor heating, the early start feature has meant that (over a few days), the thermostat has nicely learned that it needs to come on early to get to temperature. At the other end, if I set the finish time at 2200, there is no point the thermostat asking for heat for at least an hour or so before this time as…
-
Heating system efficiency score
It would be nice if Tado analyzed how efficient my heating system is. Maybe we could specify the area of the home, and with using of the consumption and weather data it would calculate the efficiency.
-
Boiler problem detection
My idea for a new feature, came to me when we was having trouble with our boiler. So the idea is tado could notify you (via the app) if it detected a possible problem with the boiler. I think this could work by tado noticing if it turns the boiler on but the heat is not increasing. As at the moment tado stays the heating…
-
App suggestion front page dashboard heating room
Can you show in the overview of the room with the small heating icon,which room is requesting heating? Right now I have to open each of them individually to see which one is triggering my kettle to run. Would be easier to see this in front screen
-
Lower flow temperature for nighttime use
Our heating is working beautifully but given gas prices and the cold, we would like a more cost effective way of keeping bedrooms warm in the winter. In practice what happens today with our tado and viessmann 200 w digital link is that the valve in one or two bedrooms partially opens every hour or so to keep the bedroom at…
-
Zones
Add the ability to set schedules for zones, keeping the individual devices as rooms, therefore seeing the temp and humidity for each area but controlling as a single schedule. Currently, you can an add multiple devices as a single room, setting a device as the master however you loose the visibility of what the…
-
2 of 3 verschillende Slimme schema's
Is het een idee om meerdere slimme schema's te kunnen maken. Welke je kan selecteren. Bijvoorbeeld: Slim schema 1: Normale week Slim schema 2: Thuis werken Slim schema 3: Vakantie (dus later uit en in bed dan normaal)
-
Heat Boost on smart Thermostat
Is there a way to enable temporary adjustments of the room temp on the Smart Thermostat? I (or the wife & kids) would like to boost the heating on the thermostat without the need to remember to open the app and “resume schedule” afterwards.
-
jamming of the needle which open and close a valve body
Je voudrais faire une suggestion d'amélioration à Tado: J'ai observé à de nombreuses reprises des blocages des pointeaux qui ouvrent et ferment un corps de vannes lorsque celui n'était pas actionné pendant un moment. Ce phénomène de grippage peut se produire en été mais également en période de chauffe dans des pièces…
-
Add option to reboot devices overnight
To improve resiliency, add an option to reboot all of the devices every night. Either the whole system or on a per device basis.
-
All thermostats history on one graph
It is very difficult to analyze the operation of the entire heating system. For example, it is difficult to see the effect of a thermostat in one room on the temperature in another. It is also difficult to say how often the heating request is sent because each thermostat sends it independently. It would be very helpful to…