-
Time display on temperature graphs
When you display the temperature graph from the tado app (iOS) you can touch the display to show the actual temperature. But the time is missing on the pop-up. Can this be included?
-
Maximum heating setting-lock
So many people have younger adults who may want to set the heating at silly temperatures. So my idea is a max temp setting-which can be controlled by an admin for the house? I think this is a good thing for many. Also avoids errors if knocking to 23 instead of 21 for example.
-
"Boiler-on" indicator on Home Screen
It would be helpful to have an easy way to tell if the boiler is being called upon or not - as it can affect radiators that do not behave independently and also help in understanding the general picture when it comes to fuel consumption. Currently, the only way to do this is to review each and every tile to see if any of…
-
Allow output of temperature,
Hello, I would like to record the temperature every time it changed to my spreadsheet, currently I can do this by creating an individual recipe for every temperature rise and every temperature fall, obviously this would take a long a time. Would it be possible to create a query which simply reports the temp, or a trigger…
-
Bug: Switching on via alexa routines sets temp to 21 degrees
If you use Alexa routines to switch off and on a thermostat then it will always default to 21 degrees instead of the schedule (even if the schedule is for it to be off anyway.) This means a basic functions like disabling the heating when the ring alarm is armed or disabling unoccupied parts of the house are impossible.
-
Include heating graphs in features without having to pay extra
I have only just purchased and installed the Tado system in my home, at huge cost with 12 TRV's to try and get even heating and where I want it. To check its working I really want to see what the temperature has been over a period of time to see how well its working, and when the boiler has been on and off, to see if I…
-
one time heating for short time
Hi, I have idea if is it possible to add in your app one time heating time. For example if I have heating plan in smart schedule, but something change in one day and I know it need heating 3 hours early, but I don't want to change the plan.
-
Artificial intelligence heating to desired temp
When I set the heating I select a room and temperature. Instead, could the app calculate how long it ‘normally’ takes to heat the room to that temp. Could the app then initiate heating, to the temp at the desired time. This is something I try to calculate but I think some development and an intelligent app could do it…
-
Copy Paste within room
The new copy-paste option is nice however still missing to do it within a room as for example Monday has same as Wednesday and Friday while other days have differen ones
-
Extensie voor internet bridge
Gelieve een “access point” / “repeater” functie te bouwen van jullie bestaande internet bridge. Mijn woning heeft 2 volwaardige verdiepingen en het bereik van de huidige internet bridge is niet voldoende. Een bijkomende bridge (per verdieping) lijkt mij geen onmogelijke opdracht. Jullie hebben reeds de hardware. Zet daar…
-
Return temperature sensor (on radiator) connected with the thermostat on the inlet
Tado should produce a temperature sensor that can be mounted on the return pipe from the radiator. The temperature measurement must then be connected via the hub to the thermostat on the radiator inlet, so that the thermostat can turn off the heat if the return temperature becomes too high. In the setting of the…
-
Add signal strength indicator to help positioning the gateway
New (quite happy) user here; the radiator thermostat that is the furthest away from the gateway started to drop out and i believe that providing some signal strength indication (or even graphs !) would help placing / optimizing the gateway position and orientation by providing feedback to the adjustments.
-
Add WiFi support to Extension kit to get rid of bridge
Seems a logical option for those folk who have a full Tado installation with HW control. Add WiFi support into the Extension kit since it's mains powered. This would remove the need for (and failure risk of) a separate bridge This would almost certainly need to also include an upgrade to mesh capability as many extension…
-
Schedule a one-time time slot, to overrule the week schedule
I would like to schedule a one-time time slot. For instance: in my home office, temperature is low by default, because I work a lot outdoors. But tomorrow from 10am - 12pm I have a meeting, so then I want it to be warm. So default temperature is low, set in my Smart Schedule. But I'd also like to tell the app 'make sure…
-
Irresponsive/malfunctioning unit alert
Hi! I had a couple of instances where one of the heating units in the apartment were irresponsive, due to something bouncing / slightly misplacing the Tado regulator. The issue, once discovered was quite easy to fix (by recalibrating the regulator), but it was not obvious to catch. I was thinking it should be relatively…
-
Set AC temperature by sensor
There should be a way for Tado to turn ON and OFF the AC to get the given room-temperature choosen in the app (read by the tado sensor). I.E: The AC might have a minimum heat of 17 degrees, but it should be posible for Tado to sett 13 degrees and then have the panel switch the AC OFF at aproximatly 13.5 and then ON again…
-
second Temperature Sensor in same room
For large rooms TRVs don’t work well. If you could assign a second temperature sensor to the same room the localised effect of the TRV sensor could be counteracted and compensated for.
-
Auto switch off Airconditioner when temperature falls below threshold temp
Heating with an airconditioner is many times more efficient than with a fossil/solid fuel burning solution. However this efficiency is greatly reduced when the outside temperature falls below 40 degrees F or 5 degrees C as the outside module of the airconditioner starts to freeze and needs to use additional energy to thaw…
-
Aanpassen aanvoertemperatuur CV
Graag een functie toevoegen om zelf de aanvoertemperatuur voor de CV in te kunnen stellen. Nu moet dat heel omslachtig en tijdrovend via de helpdesk. Ik denk dat iedereen er bij gebaat is, wanneer de klant dit zelf kan aanpassen.
-
Bring 0.1 temp increments back.
After years of making sufficient improvements to the app, Tado have in my opinion really ruined the rentals settings in the app. Instead of having 0.1 increments we now have 0.5 when manually Channing the temperature. Why why why. There are so many examples of how to do this easily.
-
Reorder scene items
It would be great to be able to reorder the commands in a scene list. Presently items are added to the bottom of the list. This means that you cannot insert a new instruction somewhere else in the list and have to start over if you want to make a change. It would be great to be able to drag and drop items within the list
-
Priority order that rooms heat up in
I think it would be a good idea to be able to set a priority of what order the rooms in my house heat up in as this would help when heading home as I would like lounge etc heated up to temp first but not so fussed about bedrooms and bathrooms. This would help to save money as heating system could come on later
-
Humidity indicator
Could have added humidity level in HomeKit nearby temperature like little ⭕️
-
Multiple households
Pretty sure this idea already been suggested in the past, but I still want to re-suggest the idea. A function to manage several households with one account would be really useful for many users.
-
Wasting battery power
Why do the valves work totally independently of the main start and stop process? What I mean is, why when the pump is about to stop do the valves close? They then may need to reopen again when the pump starts. If the valve was left open it would be ready when the pump restarts. If that valve doesn't need to be open it can…
-
Apple Watch native app
With useful canned responses/quick links eg message “you seem to have left home.. [switch to Away] [dismiss] Single click. Very cool Or at a glance small tiles showing which rooms currently being heated
-
Indicate the operating mode of temperature sensors on the home screen.
On the app, the main screen with tiles for each room, add a symbol to the tile indicating if the sensor is in Controller / Independent mode and/or has been locally set.
-
Position of valve on smart radiator
It would be nice to understand for each smart radiator what is the position of the valve. In the same way as we know how much heating is being asked from boiler, this info would help to understand better behavior of the system.
-
Real Support
Your e-mail/chat only support service with a promise to get back within 24 hours is rubbish. I have been a TADO user for years and have been happy until moving home and now cant use my new system. I am currently applying to my Credit Card company to have the £1500 I just spent returned. This is because my questions are not…
-
Ploegenschema’s toevoegen aan slim schema
Graag een ploegenschema voorzien in de kalender in plaats van enkel een dagelijks/wekelijks. Graag twee-wekelijks, drie-wekelijks of herhalend om de x aantal dagen.