-
Add arrows to Smart Radiator Thermostat to show where to turn
Tenants, particurarly in short term rentals, do not understand how to set the temperature on Tado Smart Radiator Thermostats. They often try to turn the wrong part of the device and end up with unmounting it. We got several broken radiator thermostats because our guests accidentally unmounted them and the devices fell…
-
"Slave" functionality: open the trv valve but don't demand hot water
Hi. I have a towel rad in my bathroom. I like the idea that my towels are kept dry more than I like to control the temperature in my bathroom. It would be really useful if i could 'slave' my towel trv to the heating for a time block. By slave, what I mean is that the trv will remain open during the slave slot, meaning when…
-
Master Graph, All TRVS and Thermostats
A graph that shows all TRVS and then they are calling for heat. This will help to diagnose and create better efficiency, by tell you when the boiler is being switch on and which room called for the heat. It could be linked to the wireless boiler extension.
-
TRV quiet mode via minor increments over time
An option to set a TRV, such a bedroom, into quite mode. This will slowly adjust the TRV in small increments when getting close to temp, or when needing to heat the rad. This will be extremely useful in bedrooms, as the sudden adjustment wakes the kids and wife every morning and night.
-
Multi Zoning with Profile Creation
Recently bought Tado. However unlike my previous setup where my Radiators where controlled by 2 Thermostat. One Honeywell Dial which was wired controlled all off the Downstairs Radiators to separate heating the house. To save on Energy. The second one was a Drayton Wireless RF Unit that contolled and heated the Entire…
-
Add other devices that can use the hub and app
Of course you can think of lights and alike, but there would be many, many competitors. Adding a smart smoke and heat detector, would be beneficial. This is not a complicated device, the majority of the technology is already designed by tado and, well, a smoke detector ain't something complicated. Same hub could be used…
-
Battery change without dismounting
Re-design your smart radiator valves so that the batteries can be changed without removing the device. This will make it easier for users and will stop the issue of the valve not being mounted properly.
-
Inefficient radiators
Inefficient or wrongly sized radiators could be identified easier if the durations of use or daily call for heat durations are displayed for each radiator. Any radiator running longer than others (provided it's fairly substantial) would identify that the radiator is performing poorly. The system or app currently shows…
-
Generate push notification by the app when Internet Bridge cannot be reached
When the Internet Bridge has an issue (either because it hangs or because my Internet connection is down), it would be great if I was notified by the app. That way I can resolve the issue as soon as possible. Currently I have to open the app to see that the app cannot connect to my system. Would be great if this was…
-
Allow display of ambient temp always on by an optional setting
The display looks great, unfortunately my previous thermostat used to display the ambient temp which was really handy. Would be great to display it all the time or on a schedule—yes I realise this will affect battery life but users should be able to choose the trade off.
-
Link smart reader to tado
Hi Each month I manually add my meter readings to the tado app but in the uk there is a company loopup which I have given access to my smart reader so it generates automatic reports. Perhaps tado could do the same or link up with loopup. Thanks
-
Set TRV to a "minimum" temperature
I would like to be able to set certain rooms so they have a "minimum" temperature rather than a target temperature - which will fire boiler when lower, but not switch off the TRV at the desired temperature - simply just use the temperature to know that room won't request heat unless it goes below that. That will mean if…
-
Constant Display
I would like the option to see a constant display on my wall control, thus not having to press a button to see the temperature. :)
-
More secure mounting system
Hello, I would like to have radiator mounting systems that are made of metal and not just plastic.
-
Long-press app icon options
Could a “resume schedule” shortcut be added to the list of options when you long hold the tado app icon?
-
Manual override timeout
At the moment if you manually set a valve it stay on that setting until the next scheduled event happens. You should be able to set timeouts so it defaults back to the schedule- this should also continue to work without internet. Really it should apply to everything, hit water, heating, valves
-
TRVs too easy to remove
The Child lock feature is great, kids are drawn to the clicky knobs so being able to disable the manual control is great. However that leaves the problem of physical removal of the whole thing. It requires very little force to undo from the attached base, a 1 year old can remove it. It may be helpful to update the design…
-
Improve the design of temperature overrides in the iOS app
As a new user its taken a while to discover the behaviour of temperature overrides. The actually functionality is fine. As I understand there are three options: override for a specified amount of time override til the next time block override til someone makes another change It's also great that your last choice is…
-
Change Temperatures for all Smart Rad Valves
I'd like the functionality to be able to change the temperature of all the Smart Rad values at the same time, so perhaps reducing the temperature setting all the valves at the same time
-
Make sure the heating schedule is available offline
When the Internet Bridge has an issue or the Internet connection is down, the Tado devices stop working. Recently my Internet Bridge hung during the night, which meant my heating system didn't start in the morning and the house remained cold. This can be solved by syncing the current schedule locally and keep using that…
-
Energy IQ split costs heating/hotwater
Is it possible to split the monthly costs in heating and hot water?
-
Energy IQ enhancement
[tado°] Your feature request Good morning Would it be possible to intergrate electricity consumption into the app preferably either by WiFi / Smart meter interaction, or manual read insertions so we can make good use of available information.
-
Future request: please add AUTO mode to Tado smart AC
Hi, I would love to have also AUTO mode beside COOLING, DRY, HEATING and FAN in the tado app and also if possible in HomeKit too maybe we are more people willing that it will happen
-
Definition og heating Interval per radiatorvalve
When heating, a radiator will continue heating, even if the radiator is very hot in the bottom. If it is possible to define a number of minutes per radiatior after which the heating will pause for a number of minutes. This will save the heating cost for those of us who pay per m3, and also for us who pay per KW, where…
-
Options to Limit Early Start
I like the idea of 'early start' and in general I think it works well. However, first thing in the morning there is a limit to how early I want the heating to come on, even if it doesn't get up to temperature in time (e.g. very cold mornings). This is because: - I would rather just live with it being a bit colder than…
-
Reducing the duration of heating scheduled time slots
Hello given the current energy crisis, I wanted to find out if you would consider changing the standard heating schedule time slots from a minimum of 15 minutes down to 10 minutes. It does not make sense that I am able to boast my heating for 5 minute intervals but the smallest interval I can set my heating schedule to is…
-
Tado will be better this way!
A. Keep it as it is. B. Give us local control if internet down( with some limitation on the app,course!). C. Make it more reliable and trustworthy (point B included). D. Better inside coverage of the bridge and strenght signal on the app for all zones covered. Maibe our votes will be read and seen by the Tado customer…
-
Tado Temperature Sensor to log temperatures below 0 degrees C
Hello, I'm using the Taco Temperature Sensor in my garage to purely measure the temperature. I found that there are hardly any temperature sensors that are connected to the cloud and can be read without being connected to the local wifi network. In my garage, it sometimes gets below 0 degrees C. The Tado app doesn't…
-
Tado...in the clouds!
Tado is unreliable,i use it for a while but disappointed,just an app for a lot of money,sistem has many many flows cause is cloud based,that is the main issue. Lucky me i have my old thermostat and i am using weather compensation with it and my trouble with Tado has ended,no connection lost,no lost of heat and less gas and…
-
Two ideas
1). For Combi users, develop a sensor that monitors system pressure and always when low. 2). For oil users, develop a decent tank monitoring system. I'd buy both. Tom.