-
Range Extender
We live in a 4 stories house with a lot of concrete. The Bridge is only able to reach 3 stories, on the 4 floor does the signal often go away and the device is offline.
-
Exterior weather monitor
I would like to have my own external weather monitor that could feed directly into tado to give a more accurate picture. Along with more interesting stats - probably.
-
App emergency push notification when bridge connection goes down
When Tado bridge loses connection with the cloud, and thus the mobile app please can the app push a notification to alert the phone user that something has gone bad with the Tado install so that we can fix it ASAP. Examples being no hot water or heating stuck in ON mode if the disconnection has happened whilst asleep.…
-
App feature: faster on/off using the main screen tile
I've been doing a lot of manual adjusting of my ACs the last couple of days to figure out what is a nice temperature and what isn't. And so I hit upon an idea which could improve the app: In the app we have tiles for each room. It would be a nice feature if by performing a hold-button action (for say 3 seconds) on the tile…
-
Official plugin for Elgato Stream Deck
Please create an official plugin for the Elgato Stream Deck. This would allow us to control our thermostat directly from the Stream Deck. There are unofficial plugins out there but they ask for direct entry of our tado username and password and this is a security risk. An official trusted plugin would be great. Thanks
-
Display Control for thermostat
It’s “Nice” having a white square that does nothing until you press the button, but surely having the ability to control the interface so that it could be configured to be “always On” (battery drain warning) or to display the current temperature / air quality for “X” seconds every “Y” minutes would be great
-
Allow access to DIY install instructions pre-purchase
Trying to get confidence to buy a TADO wireless receiver is hampered by the lack of supported boiler makes and models listed on the website. I have a Vokera Vision 30c. When you click on 'other' you get stuck in a loop of faqs returning you to the product finder. You need to send an email and wait for a reply (not long). I…
-
feature change to allow for heating season to be off or on
So, I have had this for less than a year, the app doesnt seem to have a setting to tell the goefencing its summer and so doesn't need to worry about the heating system and being away. If I switch to away mode to avoid the prompts it just prompts to say I'm back. I appreciate that someone my have air con controlled by the…
-
Smart AC offset to outside temperature
With the crazy heatwave happening these past few days I had some issues with my Smart AC schedule. Normally I keep it set to cool the room to 24°Celsius as that gives me a good enough temperature during more normal days. But now with the heatwave reaching temps of 35° and higher setting the AC to 24° makes the room feel…
-
2 Bridges
Can you have 2 bridges. I will have 2 zones can each one connect to its own bridge. I have a big house and connection is unreliable with one bridge. Thanks John
-
No per month charge for automation (auto-assist) l
I do understand why push-notificatioms are free, but not why auto-assist is not. It seems like an important feature that should be included when Tado sells their products as automation and smart products. Why do I have to pay per month after I have bought the product? It kind of eats into the money (I might have) saved on…
-
Temperature history and alarms
I would like to suggest a graph per Tado thermostat so I can follow up the change in temperature for instance during the night. Also an alarm function that notifies me when a thermostat goes lower or higher than the set temperature (1) and an alarm that notifies me when the thermostat goes the other way than the set…
-
UI Fix - Start/End times field text is cut off
Currently in the app, the time in the start/end time the time is not displayed fully.
-
Invite users only for geofencing
Hi, It could be a good idea to invite people on the app only for geofencing (right management or another app only for this usage?). My kids are at home from time to time between school sessions and i need geofencing to heat up the home when they come back. But i don't want my kids to play with tado settings. "Oh, it's cold…
-
Only 24h? Make multiple timespans in the heating history graph
Right now you can only see a graph of the current 24 hours of room temp and heating in the graph window found under each rooms control menu. Would be a help to se 1day, 2days, 3days, 7days and 1month And it would be great to see a graph of the average usage per month in a year, also with average inside and outside temps,…
-
Revert timer defaults back to the previous functionality
When manually turning on the hot water in the app, instead of defaulting to the same duration as the last request (e.g. 30 mins), it now defaults to staying turned on until the next scheduled change (which is often hours away). If this is not noticed by the user it can lead to the hot water being heated for hours by…
-
Tip
De app werk weer zoals het moet maar vind deze toch nog beter instelbaar https://app.tado.com/nl/main/home Hooplijk verbeteren ze die app Ook
-
Local API
Add an API server to the internet bridge (even if it requires newer, more powerful hardware) that supports controlling devices within the local network. Philips Hue provide a great example of how it can be achieved. My justification is twofold. Firstly, a local API can be accessed in the event of my internet going down.…
-
Small change to "Boost Heat all Rooms."
During the summer I use the "Boost Heat all Rooms" quick action to activate the heating once a week to keep the pipes clear and exercise the thermostatic valves. It works fine but at the end of the boost period it returns the system to the schedule rather than the state it was in before boost was pressed which, in this…
-
If at least 1 connected device is available in a room, to read and control from that
1) in a rooms settings and you select the measuring device. If that is connected then don’t grey out the room, put a red spot to indicate one of the devices has an issue. Allowing you to control the room still as and when the others connect they sync 2) energyIQ data source and units. Can we add litres for oil consumption ?
-
Disable away mode notifications when heating is off
The away mode notifications work well for me, however they don’t make any sense when the heating is off. So the weather is warm, I’ve turned the heating off, but I still get an away mode notification every time I leave the house. Any reason these couldn’t be disabled automatically while the heating is off?
-
Battery Power for AC control rather than mains plug and 1.8m lead
I have AC in bedrooms and the your smart AC control would be an attractive convenient addition to my smart heating intallation. It would be much neater to have these powered by batteries as opposed to a mains plug with 1.8m lead trailing up a wall which is very unsightly and severely limits placement options Look forward…
-
EnergyIQ bad UI design for viewing history
Hi, Thanks for the latest EnergyIQ update: >> Energy IQ has been updated, and now you can view your historical heating consumption all the way back to when you first installed tado°. To check your consumption from a previous period, open the Energy IQ skill and select the desired month from the dropdown menu at the top of…
-
Vane angle positioning on tado Smart AC
Hello! With the latest firmware (100.0) of tado Smart AC Control it is still not possible to control an angle of vanes on an AC unit :( This feature would be quite welcome and I hope for tado's support in this regard. Thanks and regards, Zarko.
-
Select and copy serial number to clipboard
When contacting technical support they request the serial number of the device. You have to manually type it in when you should be able to long press and copy to clipboard
-
Energy IQ Tariff rounding bug
The gas price is 5.65p (UK pence) per kWh and previously it was 3.44p per kWh. However Tado App asks to enter this as £ so I enter 0.0565 and 0.0344. However Tado rounds this to 0.06 and 0.03 which is quite a large rounding error, resulting in a bad estimation. Could you please update this to allow more digits. Thank you &…
-
Ventilation remote solution needed
Hi, could you please help me to find the right device to add to my existing tado° set (Wireless temp sensor+wireless receiver+internet bridge) which work perfectly to heat the house, but not to cool it down. I would need to control the existing manual ON/OFF ventilation switch as well, based on the inside temperature in…
-
Temperature monitor or probe for Hot water tank
Please can we add a remote temperature probe for a Hot water tank. Simular to a radiator thermostat. However it will tell the temperature of the Hot water Tank. This could also be used to integrate temperature control for the Hot water and weather to re-heat, turn on the hot water or turn off.
-
Store a basic schedule locally in case of crash / lost connection
My Tado system crashed when I went on holiday when the boiler was on. It stayed on max heating until I got home. Quick sums showed it had burned abut £50 in gas (which Tado refunded in the end) but surely it makes sense to store a limited schedule locally, at the boiler controller. What's potentially worse is if the system…
-
Silence mode activation for Vaillant (GREE) airco
I have a Vaillant airco, which is acutely a GREE airco. I’m really happy with the Tado remote, but i can’t select silence mode. It is the mode I use the most. Please add this function to the Tado remote