-
Thread
Thread is the future of smart home connectivity and will also help people struggling with Tado range issues. Thread should also help grow network size without overwhelming the system as it becomes more resilient.
-
Hot water schedule
is it possible to create a separate schedule for the hot water when in away mode? it is really annoying not being able to adjust the hot water schedule more accurately and automatically when we are not at home.
-
Enable Temperature Sensor & Radiator Thermostat to display temperature in Fahrenheit
I live in the USA and own 4 temperature sensors and 5 radiator thermostats. The app shows the temperature settings and readouts in Fahrenheit, but the temperature sensors and the radiator thermostats do not, which makes it extremely not user-friendly for imperial countries. Furthermore, you cannot choose the choice of…
-
3 modes for radiator thermostats: Off, Open start boiler, Open dont start boiler
There are times when I'd like a room to warm up "if the heating is on anyway" but I can't justify running the boiler just for that one room, this is possible on a permanent basis by not setting a zone controller, but I'd like the ability to schedule it. e.g. In my bedroom I'd like the radiator to heat up on a morning…
-
Eco->Comfort slider for each SRT
There's a few of us that want the SRTs to work slightly differently. I want them more open so there is more over shoot and more residual heat, some want them more open to stop too much heat being returned and others want them more closed and having tight control on the temperature. I suggest an Eco-> comfort slider so in…
-
Smart Assistant - notifying of temperature not raising as expected
It's more a feature improvement than an actual problem: I've started heating season last week and left the home for few days. The smart valves have been open all the time but temperature was not growing due to malfunction of the heating circulation pump. I've fixed it (it got blocked after summer season not being used) -…
-
Mixed buttons logic in the graph view
Hi, I've observed, that on the Android app, at graph view, the weather button follow different logic than the other two. When it is checked/enabled (black background) the weather data is gone, when it is disabled/unchecked (gray background) the weather data is shown. Meanwhile humidity and heating follow exactly opposite…
-
Tado A/C controller wall mount missing by design?
Hi, I have three A/C controllers and each one was only supplied with a temporary sticky pad to fix to the wall? Is this right? Am I missing a part? One keeps falling off the wall and have tried other sticky pads but none seem to work, seems a huge oversight to create something that should be mounted to the wall with only a…
-
Multi Tenancy
It should be possible to manage multiple houses or buildings from a single login instead of having double accounts.
-
Stats and Analytics
The web version simply doesn't have the Stats and Analytics, that are available in the mobile version. The latter isn't super convenient either as the number axes are changing with every screen, and the screen rotation isn't controllable, but at least it's there. I'd like also to have a possibility to export/download that…
-
Advanced smart scheduling
Many people work shift patterns that require a different heating schedule each week. Would it be possible to have advanced scheduling to cover multiple weeks? Ie the ability to set a heat schedule for one week, and then have it repeat every x amount of days/weeks? In exactly the same kind of way you set up repeat…
-
Wireless thermostat always on display
I'd like the wireless thermostat to constantly display the room temperature
-
Turn Off Individual Room
Currently we can turn off the whole heating system with the touch of a button, or we can go into an individual room and change its schedule to get the temperature down to a level where the heating won't kick in until it gets to the frost protection level. But with this cost of heating problem we've got, I would like to be…
-
Extra functie: 15 kamers ipv 10
Graag meer dan de 10 kamers die nu aangeboden worden. Dat is echt te weinig
-
Energy IQ - dual rate
I just want to suggest that in your energy IQ feature that you allow the user to enter two rates (a day rate and a night rate) if they are on an economy 7 energy deal. otherwise, this feature is useless to me. Also, most people in the UK have a standing rate too.
-
Energy IQ multi-rate unit price for Electric Boilers and real-time energy utilisation
I have a Tado connected to an electric boiler used to heat a wet system (radiators). That is pretty common in UK city centre apartments. I would like to see Energy IQ abke to differenciate energy prices (multi rate such as Economy 7 or 10) and read energy consumpton through API integration with Smart Meters or Clamp-on…
-
Single place to review when a boiler has been called for heat
You should be able to see within an area of the app, every time the boiler has been called for heat across all your devices. This would then show you how often the boiler is on, and therefore allow you to potentially reduce your energy consumption, and tweak the settings for your house to heat it efficiently and…
-
Mobile app should be near real time up to date
The mobile app lags significantly behind the thermostats and relevant heating systems. This makes it very confusing when the boiler is calling for heat, but the Tado app shows that nothing is heating. I've also had it, whereby the thermostats are saying 25 degrees yet the app is showing that no heat is being requested.
-
Lock openings
Hi! My termostat in my bathroom are connected at the bottom to my towel rack and the thermostat are very close too the heat pipe, so the thermostat belive it is warmer in the bathroom compare to actally temperature. So I wanted that to be possible to lock the openings on the thermostat without to check the temperature in…
-
Area expansion for Tado acount; 2nd internet bridge for better coverage in larger housing
The Tado system can currently work with 1 internet bridge to communicate between the devices. In a situation of a larger space of multiple 3+ floors 1 internet bridge is no sufficient to communicate with all devices. In my case I have a house with 4 floors and 3 thermostats on one floor are not in range (als not after…
-
Allow changing temperature if one device in a group of two or more loses connectivity
I initially reported this as a bug to online support, then they told me it works by design and should bring it up here instead. Which doesn't make sense to me but still, they didn't leave me with any options. It appears that if one device in a group is offline, you can't control any of the remaining ones through the UI.…
-
switching point in schedule should overwrite manual input
i have a tado at home and in the office. main problem i have with it that people set the temps manually. so it is set to hot and heats all the time. tado does not have setting to say. overwrite manual input at next switchi g point (eg at night same day) so it keeps heating at full steam. it should go back to schedule at…
-
Merged: Heating profiles
This discussion has been merged.
-
Boost individual room
The option to boost an individual room rather than whole house heating sometimes the upstairs is cooler the down stairs and would be good to be able to boost individual room but just now need to boost he house.
-
Backup settings
Problem - other members of family mess up carefully programmed heating schedule. Solution - access rights of other users limited or way to restore backup settings to revert to original schedule.
-
Do not count independent trv opening in heating time
I was away most of the day and one of my indépendant trv was open but the boiler was off (because away, as expected) The problem is that open time is counted in the heating activity, thus making these statistics totally irrelevant. Is it possible to only count the boiler heating time?
-
trigger reminder when open window timer expires
The open window detection is a useful feature; to make it more useful, I'd like be reminded when the timer expires because sometime you forget that a window is open or you'd like to keep the window open for longer; by sending a reminder it helps me either to close the window just when the heating is coming on again, or if…
-
Ac and valve in same room
Can you please make it possible for ac and boiler to be in the same room and see what would be thr best energy usr to heat if for one room mostly would be beter for the ac part to take ocer the heating
-
Disable open window detection when heating switched off
The tado° app currently provides notification of open windows, even if all Smart Thermostats / Smart Radiator Thermostats are set to Frost Protection. This is clearly pointless, and just annoying. It would be better to only provide the open window notification when the thermostats are set to a temperature that might…
-
Energy IQ
Could you set it up So we can put the oil Price per litre. So we could use this function. It seems you are only thinking about Gas boilers and not oil. I’m sure there are customers who have oil and would like the same Benifits.We have paid the same price for out Tado products after all