-
Activity indication on Home page
It would be great to have an indication of c/h current activity in your home. This can be as simple as the 3 wave bars, as seen when you go to each room individually, all ‘“or’ed” together displayed at the top of the home page. This allows you to know at a glance what is currently happening with the system. E.g A room is…
-
Manual/ schedule indicator to show on dashboard tile
I have Tado in my house and I love the flexibility of the system, especially as a user can turn up or down a room as they need. By often the manual intervention means that stat is the set to remain like that until it is returned to automatic either by the stat or by the app. Can we have an indicator in the app that shows…
-
Set "away" the separate room
The geofencing can switch off the heating of the entire house. But, the possibility of the setting one room is missing. For example, the children are out for one week. Why fully heat their room?
-
User specific Heating schedule
It would be very helpful if there would be the option to have user specific heating schedules. I travel for work but sometimes I work from home. Would be great if Tado would recognise that and switch heating off in the office when I am away. Could that be integrated please. Thanks
-
Geolocation for individuals in household
Hello, I would like to have the possibility to switch off the airconditioning when one individual in the household is away (in their room). This while other systems stay on. I now can only set 'away' for the whole family.
-
Individual Smart Thermostat Rad Control
I know there is a button to turn off all thermostats but it would be useful to have the facility to turn off individual stats say when someone not going to be there during the scheduled times set for that room
-
Geo/account koppelen
Om bijvoorbeeld 1 kamer aan 1 persoon te koppelen zodat als deze persoon de woning verlaat de verwarming reageert op de geo. Dan zou je het account van deze persoon/ telefoon aan een radiatorknop/pen moet kunnen toewijzen. Nu reageren allen knoppen op de geo van iedereen. Je kan alleen knoppen uitsluiten van geo. Toewijzen…
-
Profile related away mode
A possibility could be to relate and correlate the away to different profiles. When one Profile-A and Profile-B are at home ALL the house will be warmed. When profile-A and Profile-B are out ALL the house will NOT be warmed When profile-A is at home and profile-B NOT only commons rooms and profile-A related rooms will be…
-
Geofencing options that activate when a single user is home/away
We have a office which is used mainly by one person. Currently geofencing only kicks in when all the users are away. It was be great to link a room to a single user, so that the home/away status would follow just that user. This would allow us to turn heat to the office on and off based on if the primary user was out of…
-
Per room HOME/AWAY status
I would like the ability to set a home/away status to individual rooms. That way, the main home/away status can be controlled when someone is home/away, but if a home member is away for a week say and their bedroom is set to away, tado won’t heat their room, just the occupied rooms.
-
Be able to name devices rather than refer to them just by number
I would like to be able to name my Smart TRVs rather than them being numbers only. It would then be easier to know which one needs new batteries when the email comes through if there are more than 1 device in a room or area.
-
Combine Rooms & Settings with Home Tiles
It would be much more helpful if you could see the details of the radiators and room under each tile – particularly the battery status.
-
Verwarmingsstatus in tegels ruimten
Ik zou het handig vinden als op het thuis scherm in de tegels rechtsboven de 0/1/2/3 verticale golfjes zouden staan. Dan zou het in één oogopslag duidelijk zijn te zien welke ruimte een actieve warmtevraag heeft en of dat overeenkomt met hetgeen jezelf verwachtte.
-
Allow users to set/adjust the Early Start option
Tado offers an Early Start (pre-heat) option for ‘slow response’ heating systems like underfloor heating. When used with my Air Sourced Heat Pump (ASHP) this switches on heating far too early. It would be helpful if users could set a more suitable pre-heat factor to better match different homes and heating systems. This…
-
Pausing a room
It would be great to be able to pause a room. Tado is great at providing granular control of each room. But for schedules - its only possible to operate at a whole house level. Either i can turn off "all rooms" or "Boost all rooms". being able to turn off or pause a room feels like a pretty useful and essential item. the…
-
Worcester 8000 style
As worcester 8000 style is one of the most popular boilers in the uk. Would be great to get compatibility with ebus
-
Allow user to turn off partial opening of thermostatic valves
The ability of the thermostatic valves to partially open allows the Tado system to better regulate temperature and avoid overshooting target temperatures. However there is an energy efficiency cost. I live in an old house where many central heating pipes travel through unheated voids in the loft or under floorboards. If I…
-
toggle switch for schedules
hi there, my suggestion/idea is for a toggle switch for different schedules. my line of work demands that every other week i have a different schedule. one week I work in the morning, I start to work at 7AM, the next week I work afternoon, I start to work at 3PM. And then again in the morning... it would be great having a…
-
Outdoor temperature/humidity sensor
Why not an outdoor sensor ? It would be nice to have that in the same app and also it could be used to have a better weather adaptation on locations that are not covered.
-
Smart Schedule overview for all thermostats
It would be great if you could see something like this in the Tado app… See attached example/picture….
-
Internet Bridge better wifi compatibility and coverage with new wifi standards wifi 6E and wifi7
Internet Bridge and all Tado devices beter wifi compatibility and coverage with new wifi standards wifi 6E and upcoming wifi7. Updates for better software experience.
-
Full Air-conditioning Control
I have a house in France that I rent out with 5 air Mitsubishi Conditioning units. These units are inverter units so can perform the following tasks: cool,heat,dehumidify, fan, the IR controllers interface looks to of been created by the same guy that invented scientific calculators. Great if you know what you are doing…
-
Hot water tank stat
When are TADO going to develop, and release a hot water tank intelligent stat that replaces current on/off water tank stat?. This would nicely compliment the central heating and intelligent room stats currently available, and improve the system efficiency.
-
Switch off bridge LEDs/Extinction des LEDs du bridge
I would liké to Switch off LEDs on bridge. Brigthness IS toi high and it could save energy. Bonjour, J'aimerais pouvoir éteindre les LED du bridge qui éclairent tout mon salon et ça ferait aussi une économie d'énergie. Merci
-
Foutrapportage - Foutmeldingen van je ketel weergeven in de app (bv. te weinig druk)
Bij mijn huidige thermostaat van Remeha krijg ik foutmeldingen zoals bijvoorbeeld dat er te weinig druk is, of kan ik zien wanneer de brander actief is. Wanneer ik overschakel naar Tado zou ik geen enkele van dergelijke meldingen meer krijgen. Zie ook:…
-
Users of different categories
I would encourage Tado to introduce users with different categories i.e. one administrator, who makes all smart schedules and other settings, one user category, who can be assigned the role as adminstrator for one room, and one user category, who is read only, but counts in the geofencing. The reason for this is that i…
-
Gestion de plusieurs maison depuis le même compte
Bonjour, J'utilise le système Tado pour gérer 2 logements, et j'ai été surpris lors de la création de la 2ème installation de ne trouver aucune option pour ajouter cette dernière. Après quelques recherches j'ai trouvé d'autres utilisateurs confronté au même problème, et la seule solution semble être de créer un 2ème compte…
-
Hot water boost
Hi - just installed tado radiator thermostats and a hot water and thermostat- so now fully invested in the tado system. The only thing we are really obviously missing is a 30 min, 60 min , 90 min hot water boost which then switches back to programme afterwards. Would really love to see this otherwise likely will switch…
-
Colour code on air to air pump modes
The modes on the smart ac3, is colored blue for all modes except for heating, a small thing, but in fan mode it is confusing, as it is not cooling but just transfering air, make it light green so it is different from cold
-
Set max heating water temperature from the app.
This is essential for all hybrid heat pump installations.