-
Allow the setting of a specific end time when manually overriding.
Dear Everyone, Allow the setting of a specific end time when manually overriding. The way our family uses our house means that having timed heating makes no sense, so we have that effectively disabled by setting one time period for 24 hours at a low temperature (10C). We control individual rooms by overriding this…
-
Local control - not internet dependant
Given that other Smart Home products (Aqara for insurance) can now work without the internet, than it's about time Tado mixed with the times.
-
Extra functions V3+
It would be particularly nice to be able to have a few "free" functions in the app that you can program yourself. I have a function on my Mitsubishi heat pump that is not supported now. And if you can program a mobile phone to be a remote control, then surely it is also possible for Tado??
-
Ability to weight the heating across multiple radiators in a single room
I would like to be able to disable one of the radiators in my living room when, for example, we have a Christmas Tree in front of it and rely on the remaining radiator to heat the room.
-
Ability to heat and cool using a water based (hybrid) heat pump
Ability to heat and cool using a water based (hybrid) heat pump
-
Please use 0.5 degrees granularity in the wireless temperature sensor
Current granularity in the temperature sensor is 0.1 degrees in the app and only 1 degree in the device. That makes it annoyinhg, because the most standard granularity in all themorstats in 0.5
-
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode also ability to remove the heat mode displaying from the apple home app
-
display changes made via app or siri on tado smart ac control unit
display changes made via app or siri on tado smart ac control unit
-
mode control via tado smart ac control unit
pls allow to control cool/dry mode
-
fan control via tado smart ac control unit
pls enable fan control on tado smart ac control unit (speed and louver/swing if possible but at least speed)
-
Sunday Mode / Home Sick Button
When a person is off sick or the family are home during Monday to Friday the room schedules have to be updated individually. A new button like boost heating but labeled Sunday mode or sickness emoji will default all schedules to Sunday for x number of days. The button should deactivate when you hit reschedule button
-
Slim schema koppelen tussen ruimtes
Zou het niet handig zijn als je het slimme schema van de ene ruimte kan koppelen aan de andere ruimte. Meestal zijn er verschillende ruimtes in een huis die op dezelfde tijdstippen verwarmd moeten worden. Is ook handig als er meer dan 7 radiatoren in één ruimte zijn. Dan kun je de ruimte virtueel splitsen op deze manier,…
-
Energy IQ Improvement - independent TRV
Hello, A bit of context first. I moved into a new house and went all in with Tado products to make heating easier to manage this winter. My setup is as follows: Ground Floor has underfloor water heating and 2 Tado wired thermostats (Kitchen and Living Room) Upstairs has 4 Tado TRV (Bedrooms and Bath) + 1 additional…
-
One-off schedule
Hi, Would like to be able to overwrite the programmed schedule, but in anticipation. Ie if I know that tomorrow morning I will have to wake up 1hr earlier than usual, I'd like to preschedule my heating to go on 1hr earlier, but not have to adjust my regular schedule as it's for 1 time only. Right now, I'm only able to…
-
Show the wireless receivers ON/OFF graph
A single TRV can call for heat all night. And the only way to check that is to go into every single TRVs graph. Which can be many!
-
Show an overall ON/OFF graph
Show and overall ON/OFF graph that shows all thermostats. So that you can see what has been calling for heat. It will help with optimizing the schedule.
-
Hot Water button irrelevant
Hi, I'm using a separate boiler for my hot water (heat pump), not connected to the burner I'm using for my heating. As such, the hot water function is irrelevant and I would like to make the button disappear from my home screen. I also had to create a schedule for the hot water to be "always off". It would be much simpler…
-
Multiple Internet gateways
My Internet gateway failed to get a reliable signal to a radiator valve through a single wall. Can we have either multiple gateways or use the normal house WiFi instead in order to fill in dead spots?
-
Relay modules (1/4/6 channel)
Now, if we vant to create heating zones (with a pump or Underfloor heating manifold), it need a wired thermostat each zone and same number of wireless temperature sensor. It really expensive and we need buy a device that we not use 90% of it abilities... (wired thermostat, we use it a simple relay mode, not measue…
-
Tado...low heat,pump running for hours.
Hello! I have disconnected my tado V3+ cause to be honest i did not liked the way it worked,and to be more clear and on the matter of facts,i can tell you that after the instalation( bridge+ thermostat+ wireless receiver) and let the Tado to do his work i have discovered it is very annoying and frustrating to see the Tado…
-
Spread temperature range on Tado smart ac control
hi, I have a problem with Smart AC controls funcion. I have an vacation apartment that is heated by AC, and in winter time we set +8C on AC and leave it for whole season, with Tado smart AC I can heat min. to 16C that is too much for me, all I need is frost protection, or to set lowest heating temperatre. Could you spread…
-
Expose the Tado Smart Radiator Thermostats sensitivity setting in the app.
I have multiple Tado products. Also, I have 5 Smart Radiator Thermostats; they only work if the heating is at max and the heating flames are at 3. I spoke to support and they told me that they could make a change in the setting to the Smart Radiator Thermostats and set the sensitivity to low so that when heating is showing…
-
Network Strenght
A way to see the network strength for the thermostates in the app would be nice.
-
Energy IQ with Prepayment Meter
Add the ability to use Energy IQ tracking with a prepayment meter. It can be used currently but I have to manually calculate units used since the first reading. Keeping track separatly of how many unit have been added to the meter. It should have the ability to add how much is left on the meter by day and also to keep…
-
Disable Away mode when thermostat is scheduled to Off
When thermostat is scheduled to Off and I leave home, it switch to Away mode and start heating when temperature is lower than set in Away mode. This is the wrong logic for how this function works. When the schedule is set to off, the thermostat should not turn on when I am not at home.
-
Font sizes on Home screen
font sizes for room names and temp settings too small - seems to me there's enough space to make them more easy readable.
-
Always on display
Please please please make an option to show the current temperature stay always on. Even if it’s on dim - it would be so handy to have this information available at a glance
-
Tado door sensor - security alarm
Think there is a big market gap for a Tado door sensor & home security alarm. That can build on the home away function of Tado.
-
Connect Energy flip and Tado.
By connect Energy flip and Tado, tarifs and gas/electricity consumption can be synchronised. This will improve both apps.
-
Improve “Open Window Detection”
In a room with active "Open Window Detection" I opened the window while heating was off in the current schedule slot. The open window was not detected and the heating turned on with the next schedule slot a few minutes later. The detection should work regardless of the current state of schedule as long as heating is not…