-
Admin users and managed users
Admin users have full access to tado, and managed users just able to adjust the temperature in rooms for a set time period.
-
App with admin (full) and users accounts (limited)
I would very much appreciate it when you introduce asap the possibility to setup admin (full access) and user (limited access) accounts in the tado app. In fact i was disappointed and amazed that this is not possible at the moment. You don't want all users to have access to all settings.
-
Display must be on all the time
I would like to request tado to add continuous display feature which shows temperature or another animated messages ..which makes it very cool ..hope everyone wants it too
-
TRVs recognising when a call for heat has failed
I got up to a cold house this morning. I looked in the app and all TRVs were “heating to 20°” however, despite it being 8.15am and my schedule being set to start heating at 6.45/7am all rooms were still only 16° or thereabouts. It turns out my combi boiler had dropped pressure resulting in the boiler being unable to fire…
-
Homepage tile ideas (outside temp & wood burner temp)
Hi, just something that would be good to see would be ability to add a tile that displays outside home temp (via weather info source) and wood burner temp (of course would require additional hardware)
-
13 amp controller
Make the wireless thermostat capable of switching 13amps for heaters etc.
-
Support for UFH pumps
I have a single room with underfloor heating and would like to switch the manifold pump when the room calls for heat. This avoids inefficiency from circulation when the boiler is off. Ideally the pump would only be enabled when the room calls for heat, but it would also be okay whenever the boiler is on. I would prefer to…
-
Smart Schedules Profiles
As a user I want to be able to have multiple smart schedules that can be assigned to rooms without having to copy and paste. For example, I want a Smart Schedule for summer time and another one for winter time without having to tweak the temperatures or, for example, turn off a room, the office, while I am on vacation.
-
Mode that emulates a manual TRV behavior for Smart Radiator Thermostat
I wonder whether anyone else would find this useful: Problem: old leaky house that is unable to retain heat, potentially with mixed heating modes. Second problem. How to make best use of a boiler firing when zone is not expecting it. Solution: introduce 2 new modes for Smart TRVs - Passive and Passive Limited. The idea…
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…
-
Control non smart TVR radiators independently
The system must have the capability to turn my heating system on but shut the smart TVR’s. That way I could heat my towel radiator without needing to heat another room unnecessarily. Surely the wireless receiver could call to heat whilst the smart TVR are closed thus heating all non smart TVR equipped rads.
-
App home screen icons show % tvr open and issues low bat calibration or manual
Having the % open of the TVR on each room icon. If manual activated show hand Also any issue show on the app icon.
-
sleep at night with windows open - skip frost protection
Here in the UK overnight temperatures are often 1-2 degrees C, and I like to sleep with the bedroom window open. I suspect this fools Tado into turning on the smart TRV controlled radiator directly under my bedroom window. I'd like the 5C Frost Protection to a user definable number on a per-room basis or per device basis,…
-
Use standby heat setting +8/10C in my heat-pump thru tado?
Hi, I can't use standby heat setting +8/10C in my heat-pump thru tado. That is essential when I lower temperature when I am not in my cottage. Cottage could be empty for several weeks. I is no point to keep temperature over +10C. Standby heat setting 8/10C+ is separate button in Panasonic heat-pump remote. Is it possible…
-
Lodgers tado app
I need my lodger to tell tado when he is away or at home But I feel for security he should not be able to adjust the control on the heating etc
-
Set a delay in closing the smart valves after the "OFF" command to the boiler
When the boiler is sent to OFF, by the thermostat or by the intelligent valves, there is always a post-circulation time foreseen by the various manufacturers to allow the disposal of the residual heat. With Tado the thermostatic valves are closed immediately, generating overpressure in the circuit, and forcing you to leave…
-
More options to the Energy IQ
I have geothermal heating in my two-family house, which heats an underfloor water bearing heating system. To control it I have a bunch of actuators at two manifolds and thermostats in the rooms to control the heating. The app does not recognize my boiler, and thus I have chosen the closest one in the list I could find. I…
-
Cubic Feet and Standing Charge in Energy IQ
It’s great being able to add meter readings to get an idea of cost but in the UK many meters are in cubic feet not cubic metre so would be good to have this as a measurement type. Also the forecast cost does not include a daily standing charge and it would be really useful to be able to add this too…
-
Prijsplafond in de app (grafiek)
Mijn suggestie om het prijsplafond in de grafieken te plotten. Op die manier is het verbruik tov het plafond nog inzichtelijker. Lijkt mij ideaal.
-
Heating Off minimum Temp
Hi. I notice if I set my Central Heating schedule to OFF in a time slot (IE: at night) the temperature drops dramatically and it goes very cold with no Antifrost protection. Yet. If I am AWAY from home and the heating goes OFF as I am not present I can set a Minimum temp to heat my home (while I not here as its in AWAY…
-
Programmation de la température souhaitée
Plutôt que de dire : Je souhaite régler la température à 20° à partir de 7h, je préférerais dire qu'à 7h30 il doit faire 20° dans la pièce. Tado détermine ensuite l'heure à laquelle il doit commencer à chauffer davantage. Ceci permet de ne pas trop changer sa programmation en fonction de la meteo
-
Aansturing CV-ketel in app
Ik heb mijn Tado bedrade thermostaat inmiddels enkele weken en ben erg tevreden. In de app mis ik echter nog een ‘statusmelding’ dat mijn CV-ketel wel/niet brandt. Op dit moment zie ik alleen de actuele temperatuur en een doeltemperatuur, op basis hiervan moet ik er maar van uitgaan dat de ketel daadwerkelijk wordt…
-
"Lifestyles" - multiple user set memory presets of temperatures for each room
Add a section to the Tado app for "Lifestyles" (or similar name to avoid copying Honeywell Hometronic/ Evohome/ Evotouch) Multiple user set presets so a one button push in the app will activate or deactivate a memory programme with user pre-determined temperatures for each room. i.e. Lounge 22 deg, Kitchen 21 deg, Bedroom…
-
Meerdere woningen onder eenzelfde account
ik vind Tado een zeer goede oplossing maar momenteel zie ik het als te onhandig om Tado te installeren en te beheren in meerdere woningen tegelijk om deze op afstand te kunnen volgen en instellen. hiervoor moet je immers werken met verschillende accounts op verschillende toestellen om alles praktisch direct open en bij de…
-
Notification when device looses connectivity
Please make so the app gives you a notification if one of the devices looses connection.
-
Temperature presets
When adjusting the temperature for a specific block i do need to edit all time/day blocks individual, which is cumbersome. An enhancement could be the ability to have a couple of preset temperatures which can be assigned to the time block. Like "high temp." "low temp." "night temp." And when i then change the preset all…
-
Improved internet bridge / Better range.
I live in a property with 3 floors + a basement and my networking setup is on the top floor Attic and find devices in living room and basement disconnect from the tado bridge. I have Philips hue and everything works flawlessly throughout. The capabilities of the Tado Bridge needs to be improved for longer wireless range or…
-
Boiler external weather sensor + tado
It would be nice for tado to use the boiler external weather sensor if installed while running on opentherm/bus for more accurate heating. Why? Well, weather stations are not all over the place and not so accurate in some zones, so it would help people in remote locations.
-
Blocage de thermostat a distance
Bonjour, ce serait bien de développer un blocage d'un thermostat a distance et que lorsqu'on a des locations, comme ça on gère le chauffage et il n'y a pas d'abus avec des réglages de chauffage a + de 25 Degrés...
-
Hot Water temperature control
See this thread https://community.tado.com/en-gb/discussion/comment/54598#Comment_54598