-
Fault detection if no temperature change detected
If a room has an temperature increase demand but there is no change in temperature for a given time period a warning should be triggered by Tado. My boiler has an issue that it needs resetting Every soften I only find out after an hour so after i get cold. That the system is not working. But the Tado ‘care & protect’ tab…
-
Create a range extender or let us use a second bridge...
Having olny 1 bridge per house is a massive design flaw yet to be addressed by Tado. Unless you leave in a tiny house made of cardboard walls, the TRV wlll lose connection or burn batteries in only a matter I'd a couple of weeks. I live in a house across 3 floors, I really struggle with the range and can't have full…
-
Volledig open, volledig gesloten instelling
Beste Tado, Het zou zeer handig zijn om een kleine instelling toe te voegen aan de instellingen voor de slimme radiatorknoppen. Namelijk een instelling dat hij volledig open gaat als er warmte vraag is, en volledig gesloten gaat als er geen warmte vraag meer is. Dus een instelling toevoegen voor niet stapsgewijs inregelen,…
-
Themed icon for Android app
Since Android 12 or 13 apps can provide a themed icon that blends in nicely with the new visuals by adapting to the current accent color. Could you please implement it for tado as well?
-
Please implement the possibility of disabled the three LED lights of the internet bridge
Hi Everyone, the Tado internet bridge has three very bright LED lights. I would like to have the possibility to disable those LED lights please. A configuration as described below could be useful for all users: by default, after booting, the LED's are also on but in the app and/or the web portal you can choose to disable…
-
Heating Activity - Real Time
Hello, Whilst "Heating Activity" is good at showing which zone/room is currently heating, what is not in anywhere near real time is the Total Today value. It will sometimes take hours before the Total Today time changes when I know the heating has been on for more than the total of 11 minutes it has kept telling me.. I may…
-
Setting to keep the valves fully open in summer
Usually the response how to set all thermostats in summer is to set OFF - but this is wrong, spring of the valve is pressed whole summer and can get stuck when heating season is back and also this reduce "the life" of the valve. Now, there is no way in the app to set all valves to fully open state for summer, I had to…
-
Support for the EMS2 bus - Bosch Condens
Bosch / Junkers / Nefit boilers with the EMS2 bus have been on the market for many years now, have a large chunk of the European market share but Tado only supports relay operation for them. I myself have a Condens 2300i boiler and while the relay mode works up to a point, the TPI algorithm operating the relay can't avoid…
-
Smaller increments for radiator thermostats
Hi, I run a couple of thermostats on my district heating system. The water temperature to the radiators is controlled by a PI-regulator, that does a good job. However, the Tado thermostats seems in daily operation to make quite dramatic changes to the waterflow through them, which means I see dramatic water temperarure…
-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Night mode for wireless receiver (no lights)
We have installed the wireless receiver in our son's room replacing the previous controller that was placed there. Everything works fine but at night the lights are like so: We need a blackout room for our son to sleep (he is nearly 2 years old) and these lights unfortunately keep him awake. A feature I would like is to be…
-
Temperature cap by room
Can we please have the ability to set a cap on target temperatures by room on the app
-
Support multiple schedule configurations such as spring etc..
It is very common to want different sets of heating parameters for different occasions. A typical example might be a different set for summer versus winter. Or for when guests are staying versus not. It would be great if the Tado system supported the ability for user's to create multiple named configurations and switch…
-
Support for Matter standards to allow full interop across Smart Home systems
Full support and integration with the Matter standards https://buildwithmatter.com as the standards develop and get published - ideally without having to upgrade the hub, etc.
-
Leave the valves opened in 1, 2 or 3 gears
Nowadays we can close the valve (OFF) or open it fully (25º), and the control is based only in the temperature that the valve is measuring. The thing is that in my area where it below 0º at night, the valve is constantly opening and closing, with the noise of the small engine attached. To avoid this noise, the idea is to…
-
Ebus Max Flow Temperature setting (like the one just released for Opentherm).
Would it be possible to do the same for Ebus controlled boilers via the wired Tado, +- settings? My Vaillant can ramp up to 80C if it wants even if I set the max temp lower on the boiler. The ebus will ignore these settings and do what it feels is best. I might only want it to go to 66 or 70C max for example. It's just…
-
Pouvoir changer la température hors gel
Bonjour, J'aimerai pouvoir changer la température hors gel par défaut pour pouvoir éteindre mon installation simplement quand je quitte ma maison de campagne pour quelques jours plutôt que de devoir utiliser le sélecteur vertical de température qui m'oblige à changer également jusqu'à quand ce changement de température…
-
2FA / MFA - EU legal requirement
Hi, I've created a new post to again highlight the importance of this to Tado. Without 2 factor authentication/MFA, Tado will soon be in breach of EU law. In 2022, the EU Commission proposed the Cybersecurity Resilience Act (CRA) which introduces mandatory cyber controls to, amongst other things, IoT devices including Tado…
-
Mehrere zuhause pro Account
Bitte bitte bitte, ich warte seit Jahren darauf, dass ich endlich mehrere Tados in einem Account nutzen kann. Mir
-
Electric Radiator Element
There are Wifi controlled elements for electric radiators on the market so assume this is not an impossible request. However, it would be great for Tado to offer this option to link in with the main app (like the AC controls) which can offer heating to areas of a property where no wet heating system is installed. it would…
-
weekly activating of the valves during the sommer periode
Hi. Older heating systems have problems with the valves getting stuck when the heating period starts. This means that I have to dismantle all the Tado thermostats and exercise the valves so that they can work again. It would be an idea, however, if Tado once a week "turns on and off" the thermostats, so that the valves…
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Have an option to dim or extinguish the lights on the wireless receiver.
The LED lights on the wireless receiver are very bright in a dark room, e.g. a bedroom at night. It would be a useful feature to be able to dim or extinguish the lights on the wireless receiver.
-
child proof fixation of the radiator thermostat
The radiotor thermostat comes loose way to easy. My 14 months old kid had it loose in no time. What is the point of having a child protection mode in the software, if the hardware is not child proof.
-
Meter readings
Around 18 months ago we had our electricity meter changed to a smart meter. The TADO problems that followed were : 1, it wasn’t possible to enter the meter readings for the new meter so I had to calculate how many kWh we had used that day and add it to the original meter reading. 2. This manipulation worked well until the…
-
Smart boiler pressure gauge
Please create a smart boiler pressure gauge so that we can view boiler water pressure in the Tado app. I would like to get a notification from the Tado app if water pressure drops too low. Many thanks for your consideration.
-
Reduce water hammer sound by slowly closing the radiator valve
Sometimes Tado closes the radiator valves very quickly, which makes a loud bang due to water hammer. This can be bad for the equipment and it scares my kids. If the radiator valve would be closed more slowly, this would significantly reduce the amount of sound produced.
-
Tado app to set only the tempature.
Why not create an app where you can set only the tempature. It's not handy that every app user can make changes to all settings. We could defently use it. For oure building.
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…