-
switching between accounts
It could be common that families have more than one home (a main one and the second by the sea or in the mountains) then they need to create more than one account to manage different homes thermostats. I can understand, but not completely, your choice to separate account for each home but you have to facilitate the users…
-
Heating activity improvement
Hi, I believe Heating Activity tab should have an improvement in a way to show correct Heating Activity of the TRV’s which require heat. As an example I have a TRV in my basement which is an independent one, so it doesn’t call for heating. In a warm day, the boiler might be as other heat calling TRVs are not requesting…
-
Make Tado with multiple zones (more) fit for (hybrid) heatpumps
Dear Tado, Pleas make Tado with multiple zones (more) fit for (hybrid) heat pumps. This is now not yet in place for instance with the Dutch Quatt heat pump.
-
Group Rooms together
Hi, It would be beneficial to group rooms and schedules together. For instance if I want to boost the temp in certain rooms or update the schedule in certain rooms. I can hit the boost button or schedule them together
-
Heating configurations
Related in a way to being able to select multiple rooms - it would be handy to be able to create heating schedules based on different scenarios, for example; working from home, not working from home, one person away etc. Would be great to switch between them and have the schedule reflect the rooms I need heated and when…
-
Hot water temperature
I would love to be able to see the temperature of water in my hot water tank. Having a connected water tank thermostat should do the trick. This would allow the system to detect usage by seeing a significant drop in temperature as the tank refills with cold. Which in turn would determine a pattern of use and possibly how…
-
Incident Detection > Show boiler OpenTherm values / failure codes
For OpenTherm connections system should pass over the boiler properties and failures I am occasionally getting 2: Low water pressure errors presented on my boiler LCD (which also means no hot water or underfloor heating for me) and TADO app never shows there is failure with boiler or no heating / water Looking at OpenTherm…
-
Provide multi room support for external temperature sensor
Now you can just set the temperature reading to one room, it would be ideal to allow the sensor to be used for more rooms/valves. You can limit maybe the number of rooms so to avoid selling one temperature sensor for a whole house, but on the other hand you cannot think I should spend hundreds of Euros for just this…
-
Open valve mode when system is off
During periods in which the system is off (I e. Summer), provide a function/button like "fully open valves", which behaves like the rocket 🚀 function, except it can be set for a longer period of time (even months). This way the water circuit is left open and the valve is not stressed because it's fully opened.
-
Bypass offset settings when valve is closed
If valve is fully stopped, then bypass offset so to provide the most correct temperature
-
Fix the geofencing functions that I pay for
I paid Tado so that my heating would use geofencing, well it does not. When contacted Tado say there is an issue but have not provided a resolution. First it was my partners phone that would not be picked up, so we changed the phone as there was another app with another issue. Her phone now works, but I don't see why her…
-
Radiator Thermostat Vertical design
If we get a Next Generation with Thread/MATTER? (Hopefully to help with range) Radiator thermostat radiator valves keep the same connection at the bottom of the TRV like the current design. Do most of us have the TRV vertical on their radiators like most in UK or positioned horizontal?
-
Send start/stop request for pump floor heating
I know there is an (unsuported) API. Where you can check for temperature changes every 5 minutes. In my opinion, the long interval (5 minutes) makes the API useless. I am looking to control the pump of the floor heating. At the moment I do this with a termperatuur sensor on the heating-pipe (towards the floor heating).…
-
Away mode for individual users/rooms.
When I’m at home and my housemate is out their bedroom does not need to heated and vice versa for myself. Is it possible to use the geofencing feature to see which users are at home and heat rooms accordingly.
-
Fix the formula that converts cubic metres to kWh
I give readings to Tado from my gas meter. The monthly cost however is vastly out. The cubic metres are the same as my bill, the tariff is the same but in Tado my bill will apparently be less. I have just switched between suppliers having moved into a new house and they both naturally have about the same calculation to…
-
Energy IQ tariff information
Energy IQ is only useful if it is accurate, and it's accuracy is dependent on the information you supply it. Currently tado is asking for the price in £/Kwh when gas is costed at p/Kwh. The app does not allow the cost in £/Kwh to be given to 4 decimal places to allow for more accurate cost estimates.. It should be fairly…
-
Pouvoir programmer la réactivation du chauffage
Comme chez Netatmo lorsque j'indique quitter la maison en hiver, j'aimerai pourvoir indiquer une date et heure d'activation de réactivation. Ceci pour tout la maison mais aussi pour chaque pièce.
-
An IFTTT applet to reset Tado to OWNER'S smart schedule every 30 mins. For Landlords or parents!
I don't know how IFTTT applets are made, whether someone one there does it or someone at Tado has to Okay it but other smart controls have anti-tamper applets for this purpose. 30 mins would be enough to give someone a heating boost. Please see thread:…
-
indication that the heating boiler is running
on the app main screen showing rooms another box saying if boiler is active or not
-
Widget
Hallo het zou fijn zijn als de Tado applicatie ook een Widget kan oproepen op het beginscherm, misschien leuk voor de volgende upgrade !! Succes Met vriendelijke groet Stephan J Vestallen
-
A must change issue for Tado!
We have a holiday home for rent, and it is very irritating that tenants can change the programs on the smart thermostat. They must be able to change the actual temperature, but not the settings and programs on the thermostat. Also kids can make changes unintentionally It would be a great improvement that changing…
-
Hot water
You should be able to see from the app if there is hot water, when the boiler is calling to heat for hot water.
-
Window open, show witch room window is open in with app
Nice would be to be omformed in Tado app, witch room detects window is open in. Right now message display: Window open, turn off heating
-
Send notifications when firmware downloads taking place
Recently at 04:00 all my tado devices disconnected from the internet and all smart radiator valves turned to off. During the day various devices reconnected then disconnected again. On investigation I found the Smart valves were being updated with new firmware. On continuing tado I was told that firmware updates can…
-
Temperature slider should not jump to a certain position but slide from current temperature
There has been an unwanted design change in how you change the temperature in a room with the room temperature slider. In previous versions of the Tado app you could place your finger on the slider and subtly slide the slider half a degree or other amounts up or down. Now, when you place your finger on the slider, it…
-
App colours based on heating on or off
It makes no sense to have the app colours be based on a subjective assessment of the temperature the room is set to. It would be far better to have the colours change from, for example, green when at temperature and not heating and orange when heating. When I look at the app, I want to know quickly which rooms are heating…
-
Better accessibility support in the mobile app
Hi there, Due to the lack of features in the web app (which is bizarre enough on it's own), I'm forced to use the mobile app on a tablet to access a dashboard on a device large enough to read and interact with as I age and my eyesight increasingly worsens. I'm cool with getting old (ok no I'm not, but there's no one to…
-
History graph (also) in web app
I'd love to have the history graph of devices also in the web app. First of all because I have a larger screen and thereby better readability. Also I (ab)use the web app for another building, as multi-home support is not there.
-
Energy IQ in tado web app
Hi, I'm a user of both the mobile and web apps. Would you consider adding the Energy IQ info in the web app as well? For this particular section, I always have to switch to the mobile app. This is the current dialog in the web app that appears when you click Energy IQ. The display space would also be more generous in the…
-
Add timer option to Geofencing option
Add a timer option to the Manual select Home / Away Geofencing options, so that you can override any devices that are reporting as home but are not at home for a specific time length or indefinitely and on the flip side ignore devices that are away. But after the timescale is up go back to manual mode ;)